LG WD14030D User manual

4
1
2
3
5
7
5
3. Die 4 Schrauben lösen und die
Gummipfropfen etwas drehen, um sie
zusammen mit den Schrauben abzunehmen.
Die 4 Schrauben und den Schraubenschlüssel
für späteren Gebrauch aufbewahren.
• Die Transportsicherungsschrauben müssen vor
jedem Transport des Geräts wieder angebracht
werden.
4. Die Schraubenbohrungen mit den
beiliegenden Kappen verschließen.
1 2
3 4
Schraubenschlüssel
6
Green and Yellow(Earth)
Brown(Live)
Blue(Neutral) Fuse
Cord
grip
E
L
N
ca. 100 cm ca. 100 cm
ca. 145 cm ca. 145 cm
ca. 105 cm ca. 105 cm
min. 60 cm
max. 100 cm
min. 60 cm
max. 100 cm
60 – 100 cm
Hose
Retainer
Tie
strap
max. 100 cm
min. 60 cm
Owner‘s Manual
WD14030D
Safe ty ins truc tions for use
Read all instructions and ex planations of the installat ion before use. Follow the inst ructions carefully. Keep the op erating instructions
handy for later use. If the applia nce is sold or passed on then ensure that the new owner always rec eives these operating instructions.
The following warnings must be s trictly observ ed for safety reasons. T hey must be read before inst alling the appliance and put ting it
into operation.
• Intended use: T his appliance has bee n designed exclusivel y for use in dry-interior h ouseholds. It has not bee n designed for use in comme rcial or industrial
applicat ions, (for example, Beaut y salons Laundromats et c). Use the app liance only with co ld drinking grade wate r and only for washing tex tiles with
washing dete rgents designed for wa shing machines. Ever y other use is improper and m ay lead to injuries, where by the liability of t he manufacturer will
cease.
• This applia nce may only be used by adu lts. Do not allow children to t ouch the controls or to p lay with the product.
• This applia nce is not intended for use b y persons (including c hildren) with reduced p hysical, sensory o r mental capabili ties, or lack of experienc e and
knowledg e,un less they have been gi ven supervision o r instruction con cerning use of the app liance by a person respo nsible for their safet y.
• Never modif y the appliance as t his is dangerous.
• This applia nce is heavy. Transport wi th care and ensure tha t the transit bolts a re re fitted during th e machines deliver y to any new location.
• Remove all pac kaging and transpo rt bolts before using t he appliance. Other wise serious dam age may result.
• All instal lation work must be ca rried out by a qualifie d fitter or technicia n.
• Have electr ical connection s done by a qualified elec trician.
• Never place t he appliance on the p ower cord.
• If the appli ance is placed on a car pet then place the feet so t hat air can circulate u nderneath the app liance.
• Always unp lug the machine and tur n off the water suppl y after use. Disconnec t appliance by pulling o nly the plug - never disc onnect by pulling the po wer
cord. Never touc h the plug with wet finge rs or hands.
• Do not overload t he appliance.
• Wash only mach ine-washable textil es. If you have doubts regard ing this, then obser ve the markings on t he label.
• Never place e lectrical heater s, candles etc. in the vici nity of the applian ce. They could cause th e appliance to ignite o r parts to warp.
• Protect the ap pliance from wet and dam p.O therwise, there is d anger of electric sho ck and fire.
• Connect th e appliance to a suita ble wall socket for 240V. Never use an exte nsion cord or double ada pter.
• Empty all po ckets. Hard or sharp obj ects such as coins, need les, nails, screws or stone s may cause serious da mage. Unbalanced mas s may create heavy
vibration s. If heavy vibration s remain also withou t load, call for an author ized customer ser vice.
• Do not wash or dr y articles tha t have been cleaned in, was hed in, soaked in, or dabbed w ith combustible or ex plosive substanc es (such as wax, oil, paint,
gasoline, degre asers, dry-cleani ng solvents, kerosene, etc.). This may re sult in fire or explosion.
• Do not spray or us e stain remover product s near or directly on t he machine as it can dama ge the machines finish.
• Never inser t products coated wi th mineral oils (e.g. nylon coat ing, plastic belts, etc. ) into t he machine. If a stain remov er has been used then ma ke sure
that the sol vent has been careful ly washed out before inse rting the clothe s into the appliance. Oil m ay remain in the tub af ter a whole cycle result ing in fire
during dr ying.
• Do not operate t he appliance at locat ions where flammable su bstances are prese nt such as oil, benzene or high ly inflammable gas. Such m aterials may
cause fire or exp losion. Never use combu stible detergents.
• Only add the p rescribed amount of sof tener. Excessive amou nts may damage or stain t he clothes.
• After was hing, keep the drum door op en to protect the door sea l.
• There may be a da nger of scalding.
• Animals an d children may get into the wa shing machine. So always c heck the appliance b efore using it.
• During was hing, the glass door bec omes very hot. Keep child ren away from the applia nce when in operation.
• Never tr y to repair the machine yo urself. Incorrect repai rs may result in injurie s and/or serious defect s to the machine.
• The product s hould be serviced a nd repaired only by the au thorised custome r service using or iginal replacement pa rts.
• When dispos ing of your old machine, the pow er cable must be capp ed or cut off, and the door lo ck must be made unusabl e in order to protect children.
• When placing o n a carpeted floor, make sure th at the opening in the soc ket is not blocked.
• If the appli ance has been under wate r then contact the cu stomer service. Do not u se the machine as it may im pose an electric sho ck or fire hazard.
• The lower filte r cover as well as the dis penser drawer may not be ope ned during the operat ion.
• Keep all wash ing powder and detergent s away from children. There i s a danger of poisoning.
Remove Packagin g
Requirement s for install ation s ite
Transit bo lts
Electrical conne ctio n
Conne cting water supply hose
• The appliance is fitted with t ransit bolts to prevent internal
damage during transpor t. Be careful, heavy load!
• Packing and all transit bolts must b e removed before using
the washing machine.
• When unpacking the base, be sure to remove th e additional
packing support in th e middle of the base packing.
Store original packing fo r future move.
Dispose of packing materia l according to local regulations.
Unscrew the 4 bolts
using the spanner
supplied.
Keep the 4 bolts and the spanner for the future use. Refit transit bolts before transporting the appliance.
Level floor: Permiss ible floor gradient under entire washing machine
is 1˚ .
Power socket: Must b e within 100 cm of either side of location of
washing machine. Do not overload the so cket with more than one
appliance.
Additional Cle arance: For wall, floor and door space is ne eded.
(10cm: rear / 2cm:right & left side). Do not place or st ore laundry pro-
ducts on top of the washing machine a t any times. They can damage
the finish or controls of the machin e.
1. Do not use an extension cord or double adapter.
2. Have damaged supply cords replaced by the manufacturer or its service agents or a similarly qualified person
to prevent danger.
3. Always unplug the machine and turn off the water supply after use.
4. Connect the machine to an earthed socket inaccordance with current wiring regulations.
5. The appliance must be positioned so that the plug is easily accessible.
• Repairstothewashingmachinemustonlybecarriedoutbyqualifiedpersonnel.Repairscarriedoutbyinexpe -
rienced persons may cause injury or serious malfunctioning. Contact your local service centre.
• Donotinstallyourwashingmachineinroomswheretemperaturebelowfreezingmayoccur.Frozenhosesmayburst
under pressure. The electronic control unit may become unreliable at temperatures below freezing point.
• Iftheapplianceisdeliveredinthewintermonthsandtemperaturesarebelowfreezing:Leavethewashingmachine
standing at room temperature for a few hours before putting it into operation.
• Two rubber seals are supplied w ith the water inlet
hoses. They are used for preve nting water leaks.
• Make sure the conn ection to taps is tight enough.
• Periodically c heck the condition of the hose and
replace the hose if necess ary.
• Make sure that ther e is no kink on the hose and
that it is not crushed.
When your washing ma chine has two valves:
• If the washing machin e has two valves, power
saving is achieved through using hot valv e.
Water supply pressure must be bet ween 1.0-8 bar (100kPa~800kPa )
Don’t strip or crossthre ad when connecting inlet hose to the valve.
If the water supply pressure i s more than 800kPa, a decompressi on
device should be installed.
• Proper level-adjustment of the washing ma-
chine prevents excessive noise and v ibration.
Install the appliance on a s olid and level floor
surface, preferably in a co rner of the room.
• If the floor is uneven, adjust feet as required.
(Do not insert pie ces of wood etc. under the
feet). Make sure that all four feet are s table
and resting on the floor. Then check t hat
the appliance is perfe ctly level. (Use a spirit
level).
Level adjust ment
To prevent internal dama-
ge during transport , the
special 4 bolts are locke d.
If they are not removed, it
may cause heavy vibrati-
on, noise and machine to
malfunction.
Installation of drain hose
@
Name of product Front loading washing machine
Power supply 240 V~, 50 Hz
Size WxDxH mm: 600 x 640 x 850
Weight 65 kg
Max. Watt 2400 W (Wash)
Wash capacity 8.5 kg
Water consumption 73 l (8.6 l / kg)
Permissible water pressure 1.0-8 bar (100-800kPa)
Technical Specification
i
If after completing co nnection water leaks from the hose, repeat the s ame steps. Use the most conventional
type of tap for water sup ply.I n case the faucet is square or too big, remove the spacing ring be fore inserting
the tap into the adaptor.
i
i
The hose supplied w ith the machine must be used. Old h oses may not be reused
Close the holes with
the caps supplied.
Remove the 4 bolts
along with the rubber
bungs by slightly
twisting the bung.
P/No. :MFL5 9755514
nThe external hot water supp ly MUST NOT exceed 70 deg C
nPermissible cold water temperat ure : 4-25˚C
nNo further back flow protection required for connection to t he water supply.
eThe appearance and sp ecifications may be varied without notice to lmp rove the units quality.
eSpecifications sub ject to change by manufacturer.
CAUTION
This appliance is not intended fo r use by persons (including children) with reduced phys ical, sensory or mental
capabilities, or lack of exper ience and knowledge, unless they have been given super vision or instruction concer-
ning use of the appliance by a perso n responsible for their safety.
• The drain hose should not be place d higher than 100 cm above the floor.
• Proper securing of the drain hos e will protect the floor from damage due to any water leakag e.
• If the drain hose is too long do no t force back into the washing machine. This will cause abnormal
noise and cause the machine to malfu nction and leak.
Safe ty ins tuct ions for the install ation
Installorstoretheappliancewhereitwillnotbeexposedtosub-zerotemperaturesorexposedtotheweather.Fitthepowerplug
toagroundedwallsocketthatcomplieswithallstatutoryregulationsandordinances.Ensurethatthebaseopeningisfreefrom
obstructionbycarpetingifthewashingmachineisinstalledonacarpetedfloor.Incountrieswherethereisariskofcockroach
infestationorothervermin,payparticularattentiontokeeptheapplianceanditssurroundingsinacleanconditionatalltimes.
Any damage which may be caused by cockroaches or other vermin is not covered by the appliance guarantee.
CAUTION abou t positioning the appliance
Install the washing machine on a flat hard floor. Make sure that aircirculation around the washing machine is
not impeded by carpets, rug etc.
• Never try to correct any unevenness in the floor using pieces of wood, cardboard or similar materials under the washing machine.
• Ifitisnotpossibletopositionthewashingmachineawayfromagascookerorcoalburningstove,aninsulationpanel(85x60cm)
covered with aluminum foil on the side facing the cooker or stove, must be inserted between the two appliances.
• The washing machine must not be installed in rooms where the temperature may drop below 0°C.
• Pleaseensurethatwhenthewashingmachineisinstalled,thataServiceTechniciancangaineasyaccessintheeventofabreak -
down.
• Adjustallfourfeetusingthetransitboltspannerprovidedtoensurethattheapplianceisstable,with20mmclearnacebetweenthe
top of the washing machine and underside of the worktop.
CAUTION abou t the power cord
Werecommendconnectingmostappliancestoadedicatedcircuitwhichisprotectedbyamainsfuse..Thatis,asingleoutlet
supplyingpoweronlytotheapplianceconcerned,withoutanyadditionaloutletsorbranchcircuits.Checkthespecifications
ofthisowner‘smanual.Donotoverloadwallsockets.Overloadedwallsockets,looseordamagedwallsocketsorextension
cords,frayedpowercords,damagedorcrackedwireinsulationaredangerous.Anyoftheseconditionscouldresultinelectric
shockorfire.Periodicallyexaminethecordofyourappliance,andifitsappearanceindicatesdamageordeterioration,unplugit,
discontinueuseoftheappliance,andhavethecordreplacedwithanexactreplacementpartbyanauthorizedservicer.Protect
thepowercordfromphysicalormechanicalabuse,suchasbeingtwisted,kinked,pinched,squashedinajambofadoor,or
walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
CAUTION abou t location and moving
Thisequipmentisnotdesignedformaritimeuseorforusemobileinstallationssuchascaravans,aircraftetc.Turnoffthe
stopcockifthemachineistobeleftforanylengthoftime(e.g.ifyouaregoingonholiday),especiallyifthereisnofloordrain
(gully)intheimmediatevicinity.Ifrelocatingtheapplianceusetheoriginalpackingmaterial.Packagingmaterial(e.g.plasticfilm,
Styrofoam)canbedangerousforchildren.Thereisariskofsuffocation!Keepallpackagingwellawayfromchildrenanddonot
allow children to play inside the bowl as they may becometrapped.
CAUTION abou t the floor surface
• The installation surface must be clean, dry and level.
• Install washing machine on a flat hard floor.
• Poorly constructed timber base floors can contribute to excessive noise and vibration.
• Proper placement and levelling of the washing machine ensure long, regular and reliable operation.
• The washing machine must be perfectly level and firmly in position.
• Itmust not “see-saw” across corners under load.
• The installation surface must be clean, free from floor wax and other lubricant coatings.
• Do not allow the feet of the washing machine to get wet. If feet of the washing machine get wet, slipping may occur.
N
Rattling and cl anking noise Extraneous o bjects such as coins or safety pins maybe in drum or p ump.
Thumping sound Heavy wash load s may produce a thumping sound. This is usually normal.
Vibrating noi se Have all transit bolts and p acking been removed?
Water leaks. Check and tighten hose connections. Uncl og drain pipe. Contact plumber if necessar y.
Excessive suds Too much dete rgent or unsuitable detergent.
Washing machine does n ot start Power cord may not be plugged in or conne ction may be loose.
Washing machine won’t s pin Check that the door is shut .
Check that foreign object s may be blocking the drain causing the water not to drain out .
Door does not ope n Once started, th e door can not be opened for safety reasons.
At the end of the cycle or when St art Pause is pressed, wait one or two minute s before
opening the door to allow the ele ctric locking mechanism time to release.
Troubleshoot ing
• Water supply is not adequate in area
• Water supply taps are not completely
open.
• Water inlet hose(s) are kinked.
• The lter of the inlet hose(s) are clogged.
Check another tap in the house.
Fully open tap.
Straighten hose(s).
Check the filter of the inlet hose(s).
• Drain hose is kinked or clogged.
• The drain lter is clogged.
Clean and straighten the drain hose.
Clean the drain filter.
For more detailed information, please
refer to “Cleaning the drain pump filter”
• Load is too small.
• Load is out of balance.
• The appliance has an unbalance detection
and correction system. If individual heavy
articles are loaded (ex. bath mat, both
robe, etc.), this system may stop spinning
or even interrupt the spin cycle altogether.
• If the laundry is still too wet at the end of
the cycle, add smaller articles of laundry to
balance the load and repeat the spin cycle.
• Floor is unstable.
Feet are not adjusted
Add 1 or 2 similar items to help balance
the load.
Rearrange load to allow proper spinning
The oor should be a solid surface.
Adjust the feet so that the machine
does not rock from side to side or front
to back.
• Is the door opened or not
completely closed?
Close the door completely.
If the “ ” does not clear, call for
service.
Unplug the power plug and call for
service.
• Water overlls due to the faulty water
valve.
Close the water tap.
Unplug the power plug.
Call for service.
Restart the cycle.
• Water level sensor has malfunctioned.
• Over load in motor.
• The washer experienced a power
failure.
Please read safety inst ructions carefully before operating the machin e.
Thank you for b uying an LG fully automat ic washing machine.
Please read t his owner‘s manual ca refully, it provides instr uctions on safe inst allation, use and maint enance.
Keep it handy fo r future reference of thi s machine. Make a note of the mod el and serial numbers of y our washing machine.
Call for service.• Water leaks

1
2
3
1 2 3 4 5
1 3
Program
Fabric Type Water Temp.
(Option)
Cotton
Lightly soiled clothing and
small loads
Cotton
Quick
Synthetic
Baby Care
Delicate
Quick 30
Duvet
Hand Wash
Wool
Color fast garments (shirts,
nightdresses, pajamas...)and
lightly soiled white cotton
(underwear)
Polyamide, Acrylic, Polyester
Lightly soiled baby wear
Delicate laundry easily
damaged
“Hand wash” marked delicate
and wool laundry
Machine washable woolens
with pure new wool only
Colored laundry which is lightly
soiled fast
Cotton bedding with filling duvet,
pillow, blanket, sofa cover with
light filling
- Time Delay
- Intensive
- Soak
- Pre Wash
- Crease Care
- Rinse+Spin
- Medic Rinse
- Time Delay
- Intensive
- Crease Care
- Rinse+Spin
1 king size (9 Tog)
40°C
(Cold, 30°C,
60°C, 95°C)
Rating
Less than 2.0kg
Less than 4.5kg
Less than 7kg
40°C
(Cold, 30°C,
60°C)
30°C
(Cold, 40°C)
30°C
(Cold, 40°C)
40°C
(Cold, 30°C)
40°C
(Cold, 30°C)
60°C
(40°C, 95°C)
Maximum Load
Option
12
1 2 3 4 5
5
2
1 2 3 4 5
4
BA
C
Sort t he laundry
note wa shing inst ruction s ymbols -
Degre e of soiling -
Type of tex tile / colo ur -
Loadi ng the Drum
Chec k the fo lds of the fle xible gask et (grey) -
and re move a ny sma ll ar ticl es or foreig n objec ts that
may hav e fallen fro m items in th e previ ous wash. .
Chec k all ga rments for l oose items b efore loadi ng
and en sure that cl othe s are clear of t he door gask et
befor e clos ing the door s o that the cl othe s or door
gask et are no t damaged du ring the wa sh.
Fill de tergent
Refer to th e
writ ten inf ormatio n
on the d etergent' s pack ing
Turn the m achin e ON
by pres sing the Pow er button
Sele ct a
Prog ram
Sele ct an Op tion
Pre Was h / Soak / C rease Care / R inse+Spi n
Sele ct Rin se mode
and Wa shing t emper ature
4 addit ional prog rams
Pres s Star t / Pause to st art or
paus e the wa shing proc ess
Time D elay / F avor ite / Intens ive / Me dic Ri nse
Turn of f the wa ter
tap
Unsc rew the w ater
inlet h ose
Pull ou t the water
inlet f ilter
Clea n the fi lter usi ng
a hard b rist le brush
Pull ou t the
disp ense r drawer
Clea n the di spenser
drawe r under flo w-
ing wat er
Clea n inside the
rece ss wit h an old
toot hbru sh
Inse rt the d ispens er
drawe r
Cleaning the wa ter inl et filt er
Cleaning the di spens er drawer
Time Delay
Allow s you to se t the cycle's endin g time (by hourl y increments) i n advance.
How to se t “Time Delay”
- Pres s Power b utt on.
- Turn th e Progr am dial to sel ect th e program yo u requi re.
- Pres s Time Del ay button a nd set the fin ishing tim e. The machi ne will t hen autom atic ally work o ut
the tu rn on time ba sed on the ch osen c ycle.
- Pres s the St art/P ause bu tto n.
Favorite
- Favo rite p rogra m allows you t o store a cust omiz ed was h cycle for fu ture use.
- To make a Fa vori te program:
(1) Se lect a cycl e.
(2 ) Select
The co urse, wash ing met hod, numbe r of rin ses, sp in speed, wat er tempera ture e tc.
(3 ) Pres s and ho ld Favorit e program bu tto n 3 econ ds (2 beep soun ds).
The Fa vorite pro gram i s now sto red for fut ure us e.
To reuse t he program, s elec t Favorite p rogram and p ress S tart/ Pause.
Inten sive
If the la undry is heavi ly soiled “Int ensive”optio n is eff ective.
- By sel ecting th e Inten sive optio n, the washi ng duratio n may be exten ded,
d epending o n the progra m selected.
- To use thi s option, pre ss the inte nsiv e but ton once befo re the wash p rogra m is start ed.
Medic Rinse
For bes t results or fo r cleaner rins ing, sel ect the “Medi c Rinse” o ption.
This al lows th e final r inse to be h eated to 40 deg rees.
Avail able in the C otto n, Cotton Qu ick, Synth etic and Ba by Care progr ams.
Medi c Rins e is set by d efault in th e Baby Care p rogra m.
The re spec tive tempe rature ind icat or wil l light u p.
Spinn ing cycle
Tempera ture
Rinse
Optio ns
Star t / PauseProgra m Cycle
Power bu tton
Drum
Disp enser
drawe r
Filt er cov er.
Cont rol panel
Washing p rogram table
Additional pr ograms Child L ock
Tub Clean
Chang e to the de sired progra m, whilst in chil d lock mo de:
Empt y the drum
comp letly a nd close
the do or
Add a nti-lime scale
(Calg on) to th e main
wash comp artmen t.
Clos e the di sp. drawer
Power O N with
Then p ress and
hold Rinse and
Temp. but ton
Pres s the
Star t/Pau se
but ton to s tar t Tub
Clea n process
Afte r the cycle i s
comp lete, lea ve the
door o pen to d ry
Selec t this funct ion to lock th e buttons on t he control p anel and to pr event tampe ring.
TUB C LEAN is s pecial cycl e to clean the in side of the wa shing machin e.
A higher w ater level is u sed in this cyl e at higher spi n speed. Per form thi s cycle regu larly.
Preparation
lightly
heavily
Tigh ten up t he inlet
hose
Cleaning the dr ain pump filter
Washing symbols
Dispe nser dr awer
Once y ou
have f inished
cleani ng, replac e
the dra wer and
run a rin se cycle
witho ut laundry or
soap.
Cleaning and Mai ntenance
Warnin g: Before cle aning th e washing machi ne interior, unp lug the e lectr ical power cor d to avoid the ris k of elec tric shock.
Displ ayAdd itional p rograms
6 3 sec.
6 3 sec.
6 3 sec.
Ext erior
Prope r care of your w ashing mac hine can ex tend i ts ser vice life. T he
outs ide of the mac hine can be c lean ed with war m water and a ne utral
non-a bras ive ho usehold de terge nt. Immedia tely wipe of f any spill age.
Wipe w ith da mp cloth. Avo id str iking the s urface wi th sharp ob jects. Nev er
hose d own th e machine!
Inter ior
Dry a round the wa shing mach ine door
open ing, fl exible gas ket and door g lass .
Run wa shin g mach ine th rough a comp lete
cycl e usin g hot wat er. Repeat proc ess if
nece ssa ry.
Cleaning in gen eral Impor tant: Do not u se methyla ted spirit s, solvent s or simila r produ cts.
Water Tem perature : Select wat er tempera ture to suit w ash cycle s. Always fo llow garme nt manufac ture’s care l abel or ins tructio ns when was hing.
Inte nsive: I f the laund ry is heavi ly soiled “C otton 40˚ C +Intensi ve” option i s effe ctive.
Set pro gram at “Cot ton 40˚C+ Intensiv e” option for t est in acco rdan ce or in c onformit y with AS/ NZS 2040.2.
For be st washing r esults, we r ecommend t o mix dry det ergent wit h warm wate r.
Pre Was h: If the lau ndry i s heavily s oiled, “Pre Wa sh” Cotton i s recommen ded. Pre Wash i s availab le in the Cot ton, Cotto n Quick, Syn thetic an d Baby Care p rogram.
Crea se Care: If yo u want to preve nt creasi ng, select Cr ease Care o ption.
Medic R inse: For be st results o r for clean er rinsing, y ou can choo se Medic Ri nse opt ion. Medic R inse is set by d efault in t he Bab y Care progr am.
6 3 sec.
The Be ep on/off fu nction ca n be set by pres sing and
hold ing th e Option and R inse butt on simulta neously.
Beep on / o ff
The Be ep on/off fu nction ca n be set at any ti me and it is
auto mati call y cancell ed in the even t of a power cut.
The Be ep on/off fu nction al so wor ks when powe r is off.
The wo ol was h cycle of thi s machine ha s been appro ved by Woolma rk for the wa shin g of mach ine washa ble Woo lmar k products p rovided th at the produ cts are
wash ed accordi ng to the inst ruction s on the garm ent label a nd tho se issued by t he manufa cturer of th is washing m achine M08 06.
N otes
Neut ral de terge nt is recomm ende d. The wool cyc le feature s gentle tu mblin g and low-spe ed spin for ga rment care.
Warn ing: Kee p all washin g powder and d etergent s away from ch ildre n. Danger of po isoning
INS ERT PL US INTO TH E MAINS SO CKET
Neve r touc h the pl ug with wet ha nds!
Neve r remov e the plug fro m the
sock et by pul ling on the c ord.
POSI TION DR AIN HOSE .
Posit ion Drain h ose as p er the inst allation i nstruc-
tion s in this manu al
WATER C ONNECT ION
Turn on t he wate r tap
CHEC KING THE M ACHINE
Neve r use a de fect ive ma chin e! In ca se of any
fail ure, fi rst un plug t he machine a nd turn off t he
water tap.
PRE PARI NG LAUN DRY A ND USI NG MACHI NE
WIT H CARE
- empt y all pocket s
- remov e all metal pa rts
- plac e the de licate tex tiles into t he laundr y net
- clos e zipp ers
DRU M CAR E
- remov e extrane ous ob ject s
- leav e door o pen to d ry th e drum when no t in use.
- chec k the r ubbe r seal s regularl y
ECOL OGICAL WA SHING
- make u se of the max. w ashing qua ntity
- Plea se note t he washin g capa cities fo r each c ycle
as men tion ed in the Wash ing program t able.
- do not “pr e wash” if pos sible
- use sh ort p rogra m if possib le
LAU NDRY WIT H DIFFER ENT AMOU NTS OF
SOIL ING
- wa sh new t exti les separ atel y
- do n ot prew ash
- pre treat dir ty sp ots
- pre w ash
Dry flat
Do not bleach
OK. to bleach
Do not
tumble dry
Hang to dry
Drip dry
Medium hot
ironing
Hot ironing
Do not iron
Washing
temperature
Do not wash
Luke warm ironing
BMain Wa sh
For Laundr y requiring detergent,
place recomm ended dosage in to this
compar tment. Please note that li quid
detergent will e nter the tub as it is poure d
and may not be sui table for a delay star t.
CSoft ener
Do not exceed the M AX-Level.
Highly dens ed softeners are to be
diluted wit h some water.
Excessi ve softener can cau se brown
or grey spott ing on the clothes.
APre Was h
The Pre wash co mpartment can be u sed
for Normal to h eavy soiled clothe s, by
adding a prewa sh or normal detergent to
this compa rtment before selec ting this
wash option w ith the Cycle.
To activa te:
pres s and ho ld
the Op tion butt ons
simul taneou sly unt il
" " app ears in
the di splay.
To deacti vate:
pres s and ho ld
the Op tion butt ons
simul taneou sly for
3 seco nds until th e
" " is remo ved
from t he display.
Pres s and ho ld
the Op tion butt ons
simul tan eous ly
Pres s
Star t /Paus e
Sele ct the d esired
progr am
Pres s
Star t /Paus e
Open t he lower fil ter
cove r and pu ll out
the dr ain hose.
Unpl ug the d rain hos e
plug. Then o pen the
filt er by turnin g to
the le ft
Remov e any
extr aneous matt er
from t he pump filt er
Afte r clean ing, refi t
the dr ain filter c ap and
tigh ten it b y turn ing it
cloc kwi se. ins ert t he
drai n plug
Clos e the low er
cove r