9
【Mode 1】Vibration Saving Power mode (default mode)
Start to send the position data when device is moving; Stop to send the data when device is
static. This mode can save power and GPRS cost
It is every 1mins/1 times positioning when device is vibrating
【Mode 2】Real-time T mode (urgent mode)
If your app setting upload time interval is 60s, it is every 1mins/1 times positioning
(positioning time interval can be changed, T-mode is the most consuming power)
【Mode 3】Single positioning, saving power smartly (Lowest power
consumption)
If you want to positioning, click and request single positioning. Later the device enter the
power saving mode and keep standby automatically.
If you want to urgently positioning, you can check the historical track and find real-time
dynamic positioning, then it will turn into real-time T-mode.
【Mode 4】SMS mode position (close GPRS)
Switch way: SMS 1: sms123456
SMS 2: notn123456
Use mobile phone call the device and hang up or send “smslink123456 ”to SIM card in
tracker, you will receive a position.
4. Command
NOTE:
1) Device default password: 123456 (note the space key in the command)
2) Use the DAGPS phone app or send message to the tracker for all command setting.
3) If you want longer standby time, please don't open move alarm and real-time location tracking
function (Trajectory mode). Otherwise, the battery will run out very quickly.
