LINKVIL W611W User manual

Portable WiFi Phone
Quick Start Guide
V1.0
W611W

Packing list
Handset
Belt Clip
Quick Start Guide
Battery Cover
Portable
WiFi Phone
Rechargeable Battery Power Adapter
Charging Base
Distance sensor
Earpiece Status Indicator
Speaker
Headphone jack
PTT key
Soft key
Phone book
Keypad
Microphone
Charging interface
On-hook key
Off-hook key
Hands-free
Soft key
Screen
Volume Key +
Volume Key -
Navigation key
OK key

Install the battery
1. Remove the rear case: Remove the rear case of the whole machine with a
little force from the handle position of the rear case of the main unit.
2. Install the battery: Take out the battery from the packaging box, with the
battery with the notch facing up, put the battery C at the battery compartment
C, and pull the battery button until it completely fits the underside of the
battery.
3. Install the battery cover: Take out the battery cover from the packaging
box, and press the battery cover firmly along the edge of the battery
compartment to ensure that the outer surface of the battery cover is
completely inserted into the battery compartment and flush with the edge of
the battery compartment, reaching IP67 waterproof level.
4. Install the back cover: Align the back cover with the buckle on the back of
the main unit, press your hands along the edge of the main unit from top to
bottom (there will be a "click" sound during the process), and ensure that
there is no gap, it means that the back cover is fastened.
Remove
the rear case Install the battery
Install the battery cover Install the back cover
Battery
button
C C
Buckle

Fanvil Technology Co., Ltd
Website: www.fanvil.com
EMail: [email protected] [email protected]
Tel: [phone] Fax: [phone]
Add: 10/F Block A, Dualshine Global Science Innovation Center,
Honglang North 2nd Road, Bao'an District, Shenzhen, China

Replacement battery
1. Remove the rear case: Remove the rear case of the whole machine with a
little force from the handle position A of the rear case of the main unit.
2. Remove the battery cover : From the back of the main unit,
buckle the hand position B, and pull it upwards in the direction indicated by
the arrow at the same time (depending on the strength of different users, it
may be removed after two or three times of pulling; in order to ensure the
waterproof level of the machine , it is not easy to disassemble here).
3. Remove the battery: Pull the battery button down to remove the old
battery.
4. Install the battery: Take out the battery from the packaging box, with the
battery with the notch facing up, put the battery C at the battery compartment
C, and pull the battery button until it completely fits the underside of the
battery.
5. Install the battery cover: Take out the battery cover from the packaging
box, and press the battery cover firmly along the edge of the battery
compartment to ensure that the outer surface of the battery cover is
completely inserted into the battery compartment and flush with the edge of
the battery compartment, reaching IP67 waterproof level.
6. Install the back cover: Align the back cover with the buckle on the back of
the main unit, press your hands along the edge of the main unit from top to
bottom (there will be a "click" sound during the process), and ensure that
there is no gap, it means that the back cover is fastened.
Remove the
rear case
Remove the
battery cover
Battery
button
Remove the battery
A
B

Special statement: This product belongs to the three-proof equipment of
IP67. Under normal use, please do not disassemble the battery cover
arbitrarily. After long-term disassembly, the protection level of IP67 will
be affected. We are not responsible.
CC
Install the battery
Battery
button
Install the battery cover
Install the back cover
Buckle

Connect the charging base
Install the belt clip
Note：
1.Use Fanvil-supplied power adapter (5V/2A). A third-party power adapter may
damage the handset.
2.Check the charging status on the top-right corner of the LCD screen.

Battery warning
To prevent the possibility of the pack from leaking, heating, fire.Please
observe the following precautions:
The soft aluminum packing foil is very easily damaged by sharp edge parts
such as Ni-tabs, pins and needles .
Do not strike at pack with any sharp edge parts.
Do not immerse the pack in water and seawater.
Do not use and leave the pack near a heat source as fire or heater.
Do not reverse the positive and negative terminals.
Do not connect the pack to an electrical outlet.
Do not discard the pack in fire or heat it.
Do not short-circuit the pack by directly connecting the positive and negative
terminal with metal object such as wire.
Do not transport and store the battery together with metal objects such as
necklaces, hairpins etc.
Do not strike or throw the pack.
Do not directly solder the pack or battery and pierce the battery with a nail or
other sharp object.
When charging, please use the charger configured at the time of purchase.