Lloyd L40ND User manual

A
Important Safety Instructions
B
Important Safety Instructions
Do not open the back cover.In no
case the user is allowed to operate
inside the TV set.Only a qualified
technician from the manufacture is
entitled to operate.
The flash with the symbol of arrowhead,inside an
equilateral triangle alerts the user about the
presence of a dangerous tension not isolated
inside the product which can be sufficiently
powerful to constitute a risk of electrocution.
The point of exclamation inside an equilateral
triangle alerts the user about the presence of
important operating instructions and
maintenance in the document enclosed in the
package.
Disposal of Used Electrical & Electronic Equipment
The meaning of the symbol on the product, its accessory or packaging indicates that
this product shall not be treated as household waste.Please, dispose of this equipment
at your applicable collection point for the recycling of electrical & electronic equipments
waste. In the European Union and Other European countries which there are separate
collection systems for used electrical and electronic product. By ensuring the correct
disposal of this product, you will help prevent potentially hazardous to the environment
and to human health, which could otherwise be caused by unsuitable waste handling
of this product. The recycling of materials will help conserve natural resources. Please
do not therefore dispose of your old electrical and electronic equipment with your
household waste. For more detailed information about recycling of this product, please
contact your local city office, your household waste disposal service or the shop where
you purchased the product.
Main plug is used as the disconnect device, the disconnect device shall remain ready for
operating.
Incorrect replacement of the battery may lead to the risk, including the replacement of
another similar or the same type. Do not expose batteries to heat such as sun or fire or
something like that.
The device should not be exposed to dripping and spraying and it can not be placed under
objects filled with liquids.
Please read the following safeguards for your TV and retain for future reference. Always
follow all warnings and instructions marked on the television.
1. Read, Retain, Follow All Instructions
Read all safeties and operations about the TV. Retain them safely for future reference.Follow all
operations and instructions accordingly.
2. Heed Warnings
Adhere to all warnings on the appliance and in the operating instructions.
3. Cleaning
Unplug the TV from the wall outlet before cleaning. Do not use liquid, abrasive, or aerosol cleaners.
Cleaners can permanently damage the cabinet and screen. Use a soft dampened cloth for cleaning.
4. Attachments and Equipment
Never add any attachment and/or equipment without approval of the manufacturer as such additions
may result in the risk of fire, electric shock or other personal injury.
5. Water and Moisture
The apparatus shall not be exposed to dripping of splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
6. Setting
Do not place this TV on an unstable cart, stand or table. Placing the TV on an unstable base can
cause the TV to fall, result in serious personal injuries as well as damage to the TV. Use only a cart,
stand, bracket or table recommended by the manufacturer or salesperson.
7. Ventilation
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation for the
TV and to protect it from overheating. Do not cover the ventilation openings in the cabinet and never
place the set in a confined space such as built-in cabinet unless proper ventilation is provided. Leave
a minimum 10 cm gap all around the unit.
8. Power Source
This TV should be operated only from the type of power source indicated on the marking label. If you
are not sure of the type of power supplied to your home, consult your appliance dealer or local power
company.
9. Grounding or Polarization
This TV is equipped with a polarized alternating current line plug (a plug having one blade wider than
the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the
polarized plug.

C
Important Safety Instructions
D
Important Safety Instructions
10. Lightning
For added protection for this TV during a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.
This will protect the TV from damage due to lightning and power-line surge.
11. Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such power lines or circuits. Where installing
an outside antenna system, extreme care should be taken to keep from touching such power lines
or circuits as contact with them might be fatal.
12. Overloading
Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
13. Object and Liquid Entry
Never push any kinds of object into this TV through openings as they may come up against
dangerous voltage points or short-out parts that could result in fire or electric shock. Never spill any
kinds of liquid on or into the TV.
14. Outdoor Antenna Grounding
If an outside antenna or cable system is connected with the TV, be sure the antenna or cable system
is grounded so as to provide protection against voltage surges and built-up static charges. Section
810 of the National Electric Code, ANSI/NFPA No. 70-1984,provides information with respect to
proper grounding of the mast and supporting structure, grounding of the lead in wire to an antenna
discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
15. Servicing
Do not attempt to service this TV yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
16. Damage Requiring Service
Unplug the TV from the wall outlet and refer servicing to qualified service personnel under the
following conditions:
(a) When the power - supply cord or plug is damaged.
(b) If liquid has been spilled, or objects have fallen into the TV.
(c) If the TV has been exposed to rain or water.
(d) If the TV operates abnormally by following the operating instructions. Adjust only those controls
that are covered by the operating instructions as an improper adjustment of other controls may result
in damage and will often require extensive work by a qualifi ed technician to restore the TV to its
normal operation.
(e) If the TV has been dropped or the cabinet has been damaged.
17. Replacement Parts
When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.
18. Safety Check
Upon completion of any service or repair to the TV, ask the service technician to perform safety
checks to determine that the TV is in safe operating condition.
19. Heat
The product should be situated away from heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that product heat.
20. Attention
Excessive sound pressure from earphones and headphones can cause hearing loss.

NOTES
NOTES
1
Contents
2
Getting Started
Making Connections .............................................................................
Shortcuts Instructions ...........................................................................
To Use the Menu ..................................................................................
Using the Channel Menu ......................................................................
Using the Picture Menu ........................................................................
Using the Screen Menu ........................................................................
Using the Option Menu ........................................................................
Using the Lock Menu ... .......................................................................
Using the Sound Menu ........................................................................
PC Setting ...........................................................................................
Brief function introduction ....................................................................
Digital multimedia Player .....................................................................
Enjoy video files...................................................................................
Enjoy mp3 audio files ..........................................................................
Browse the JPEG pictures...................................................................
Browse the text files of TXT format .....................................................
Trouble Shooting .................................................................................
Usb Multimedia Playback Format........................................................
2
6
8
8
9
10
10
11
12
12
12
13
13
15
15
16
17
18
Getting Started
Basic Features
Other information
TV JACK
ANT 75
Making Connections
Check the jacks for position and type before making any connections. Loose connections can
result in image or color problems. Make sure that all connections are tight and secure.
Not all A/V devices have the ability to connect to a TV, please refer to the user manual of your A/V
device for compatibility and connections procedure.
Always unplug the power cord when connecting external equipment.
It is recommended that coaxial cable (75Ω ) be used to eliminate the interference caused by the
mismatched impedance.
The antenna cable should not be bound together with the power cord.
When using the cable TV, please insert the plug of the coaxial cable (75 Ω) directly into the antenna
outlet.
1. To have an optimal picture quality, it is strongly recommended to have an external antenna or a
cable TV.
1. This unit has standard USB interface and can be connected to the standard USB1.1 and USB2.0 disks.
2. You can either use the USB connection cord or directly insert the USB into the USB port at the side of
the TV.
Connect to devices with USB interface
Connect to broadcast antenna or the cable TV
TV JACK
USB
Illustrations are for your reference only!

3
Getting Started
4
Getting Started
Equipment with A/V jacks
DVD Player/Recorder
Video
Camera
EXTERNAL DEVICES
Set-top box
Satellite Receiver
Satellite
antenna
cable
VCR
TV JACK
A/V OUT
Video
L
R
White(L)White(L)
Yellow(Video)Yellow(Video)
Red(R)Red(R)
AV Cable
(not included)
VIDEO LR
AV IN
YPBPR
COMP
LR
Equipment with A/V jacks
Video
Camera
EXTERNAL DEVICES
Satellite
antenna
VCR
White(L)
White(L)
Red(R)
Red(R)
Audio Cable
(not included)
Component Cable
(not included)
TV JACK
Component
R
L
PR
PB
Y
PR/CR
PR/CR
PB/CB
PB/CB
YY
NOTE
The “Y, PB and PR ” connectors on your component devices (PVR or DVD) are sometimes marked
with Y, B-Y and R-Y or Y, CB and CR. (Colors for inputs and cables must correspond on both
devices.)
1. Connect video terminal to an appropriate external terminal on A/V device such as a VCR, DVD or
Camcorder with a video cable.
2. Connect“R -AUDIO - L” on your set to the corresponding audio terminal with audio cables on the A/V
device.
1. Use an HDMI cable to connect the A/V device’s HDMI output jack to the TV’s HDMI jack.
2. Plug the connected devices into the mains socket before switching on the TV .
3. Select the corresponding source from the TV.
1. Use a VGA cable to connect the PC’s VGA output jack to the TV’s VGA jack. Use an audio cable to
connect the PC’s audio output jack to TV’s PC AUDIO IN jack.
2. Plug the connected devices into the mains socket before switching on the TV.
3. Select the corresponding source from the TV.
1. Component video(Y, Pb, Pr)transmits video as separate Y, Pb, Pr signals. Use this connection for
high-definition video signals from a DVD or other equipment.
2. Connect Component inputs (“PR ”,“PB ”, “Y”) and audio(R/L) of your set with Component video and
audio cables to the corresponding component video and audio (R/L)out connectors on the PVR or
DVD. Audio input of Component shared with audio jack of AV IN.
Connect to AV devices
Connecting Component Devices (DVD/PVR)
Connect to devices with HDMI interface
Connecting a PC with VGA Cable
NOTE
The HDMI connector provides both video and audio signals, it’s not necessary to connect the audio
cable.
Support digital connections between HDMI - enabled AV devices such as PVR, DVD, Blu-Ray, AV
receiver and digital devices.
Some devices such as PVR or DVD player require HDMI signal to be set to output in the device's
settings.
Please consult your device user manual for instructions.
HDMI
HDMI
TV JACK
EXTERNAL DEVICES
DVD Player/Recorder
Set-top box
Equipment with HDMI jacks
HDMI Cable
(not included)

5
Getting Started
6
Getting Started
NOTE
NOTES
NOTE
Turn the Power button off when you do not intend to use the TV for long periods, for example
overnight. Remove the connection from the wall power outlet if you do not intend to use the unit for
longer period, for example, if you plan to be away for a few days. Wait at least 5 seconds after
turning off if you want to turn on the TV again.
1. To turn your TV on: Connect the TV to an AC power outlet and turn on the AC Power ON/OFF switch
and turn on the Power button. A few seconds later an image will appear on the screen.
Connecting a headphone
Turning your TV on and off
1. Select the video source depending on the video device you have connected to the TV set. TV, AV,
Component, HDMI, VGA and DMP can be chosen as the video source.
2. Press [Source] to select the video source . When the list of video source appears, press [▲/▼] to
select the source, then press [OK] to enter.
Selecting the video source
Press [VOL+/VOL- ] to increase or decrease the volume. Press [Mute] to turn off the Audio. Press
[Mute] again to turn on the Audio.
Adjusting the volume
Press [CH+/CH-] to go to the previous or next channel. Either, Press the number buttons to select a
channel. For example, to select channel 12, press 1, then 2 within 3 seconds.
Changing channels
Press [Sound] one or more times to select the sound mode which you want. Standard, Music,
Movie,Sports, User(a mode that you set) mode can be selected.
Selecting the sound mode
Primarily this unit is intended for use as an LED TV. If you want to use it as a monitor, please
contact the manufacturer of the PC Video/Graphic's card for further support. Perfect compatibility
is not warranted.
The VGA cable will not be supplied with the product.
We strongly recommend to use VGA cable with 2 cores as shown in the figure.
Headphones can be connected to the HEADPHONE output on your set. (While the headphone is
connected, the sound from the built-in speakers will be disabled.)
To prevent possible hearing damage, do not listen at high volume levels for long periods.
EXTERNAL DEVICES
Computer
TV JACK
VGA PC AUDIO IN
Audio Cable
(not included)
VGA Cable
(not included)
HEADPHONE
EXTERNAL DEVICESTV JACK
Shortcuts Instructions

7
Getting Started
8
Basic Features
The option of aspect is vary with different source.
1. Press [ZOOM] to display the aspect ratio. Press this key several times to switch this mode.
2. You can select 16:9, Zoom 1, Zoom 2, 4:3. ( When VGA input only 16:9, 4:3, 1:1 are available)
Press [Picture] one or more times to select the picture mode which you want. You can select
Standard, Mild, Dynamic, and User (a mode that you defined) mode. 1 Press the [Menu] button to open the main menu.
2 Press [▲/▼] to select a menu option, then press [ ►／OK]
to enter the menu.
3 In each menu, you can:
Press [▲/▼] to select an item,
Press [◄/►] to adjust the value,
Press [►/OK] to enter the submenu,
Press [Menu] to return back the previous menu.
4 Press [Exit] button to exit the menu.
Selecting the picture mode
Selecting the aspect ratio
1. You can specify the time you want your TV to wait before it automatically turns off. Press [Sleep] one
or more times until the remaining time which you want appears.
2. You can select Off, 10 minutes, 20 minutes, 30 minutes, 60 minutes, 90 minutes,...... 240 minutes.
Setting the sleep timer
To use the Menu
Using the Channel menu
NOTE
If there are no input signal, the TV set will turn to standby mode automatically after about 15
minutes.
NOTE
Wrong sound system selected may result in abnormal sound and image.
The menus in the user manual
may vary slightly from the
actual screen.
Auto Tuning: Auto Tuning will search for available channels
and program receivable channels.
ATV Manual Tuning:
Channel CH: To set the current channel No..
Color System: To set the color system of current channel.
There are three modes to be chosen in all including
PAL,SECAM,NTSC.
Sound System: To set the sound system of current
channel. There are four modes to be chosen in all including
B/G, I, D/K,MN.
NOTE
NOTE

9
Basic Features
10
Basic Features
You can rename the channel by no more than 5 characters.
Fine Tune: Under poor reception conditions, or when receiving analogue signals from distant TV
stations, the picture or sound quality might be improved by using the Fine Tune option.
Program Edit: Allows you to edit TV programs in the Channel list. After having searched for channels,
you can Enter Program Edit menu to select the program you want to edit.
Tint: Adjust the color of the image more red or more green to make the image more natural.
Color Temperature: Change the color temperature by pressing [◄/►]. You can select the color
temperature from these options: Medium, Warm, and Cool.
Noise Reduction: It can optimize the picture signal from time and space; reduce the outside noise
interference and return the pure initial signal. It has four ratings: Low, Middle, High, and Off.
Clock: Adjust the VGA Clock to match the PC clock.
Phase: Adjust the VGA phase to match the PC.
OSD Language: Allows you to select your desired on screen
menu language. Press the [◄/►] buttons to select your
desired on-screen menu language.
ZOOM: 4:3 or 16:9 /ZOOM1 /ZOOM2 (when VGA input only
16:9,4:3,1:1 are available)
Blue Screen: Set the background when there is no signal. The
background will show blue screen when it’s on and show noise
when off.
Sleep Timer:You can select off,10min .....240min
Auto Sleep:You can select off,3H,4H,5H
OSD Timer:You can select 5,10,......30s.
Reset: Parameter settings to its original state.
Auto Adjust: Adjust the VGA Clock to match the PC clock.
Horizontal / Vertical Position: Adjust the horizontal / vertical
position of the image by pressing [◄/►] buttons.
Color: Adjust the brightness of the color by pressing [◄/►] .
Sharpness: Increase the sharpness level for clearer images or decrease the sharpness level for
smoother images by pressing [◄/►].
Allows you to set your preferred picture mode.
Picture Mode: Allows you to select the picture mode which you want, Standard, Mild, Dynamic, and
User (a mode that you see) can be selected.
Contrast: Decrease or Increase the contrast of the image by
pressing [◄/►]. The grade reflects the contrast between the
image and the background.
Brightness: Decrease or Increase the brightness of the image
by pressing the [◄/►]. The grade shows the brightness of the
current image.
1. Delete channels: Press the [Red] button once to delete the selected channel.
2. Rename channels: Press the [Green] button to rename the selected channel. Press the [ ▲/▼]
buttons to select the characters to represent the station name. Press the [ ◄/►] buttons to move to
the next character and then press the [Green] button again to confirm the new name.
3. Move channels: Press the [Yellow] button and press the [▲/▼] to move the selected channel. Press
the [OK] button to confirm.
4. Skip channels: Press the [Blue] button to skip the selected channel. Press the [Blue] button again to
undo it.
Using the Screen menu(VGA mode only)
Using the Option menu
Using the Picture menu
NOTE

11
Basic Features
12
Basic Features
When only in DMP.
Regional Language: Allows you to select your desired subtitle language.
Encoding Standard: You can select ISO or Windows.
Set the PC Software properly to match one of the below options.
With the digital multimedia playing function, this unit can recognize the standard USB 1.1 and USB 2.0
devices, including hard disks and USB flash drives. You can use this unit to browse photos, listen to
music, play audio and video files of multi formats, and so on.
VGA____ (640×480 /60Hz) SVGA___ (800×600 /60Hz) XGA____ (1024×768 /60Hz)
Hotel Mode: Into the Hotel Mode ,Original password is
“0000“.
Allows you to lock your desired item on screen menu. Such as
Source, Default Source, Default Programme, Max Volume,
Default Volume.You can also set a new Password again.
Key Lock: If this switch is set to ON, the button on the
machine will not respond.
Allows you to select an audio-enhancement technique.
Sound Mode: Allows you to select the sound mode which
you want. Standard, Music, Movie, Sports, User (a mode that
you set) mode can be selected.
Treble / Bass:Adjust the high / low frequency sounds.
Balance: Adjust the sound between the left and right
speakers by pressing the [◄/►] buttons.
Auto Volume: On or Off can be selected. If On is selected,
the option keeps the audio in a preset range to eliminate
large in volume.
Using the Lock menu
PC Setting
Brief function introduction
Using the Sound menu
NOTE
Your PC/Notebook may not be able to display some of these resolutions.
Take Windows XP as an example, and the Windows system display setting is as illustrated:
Right click anywhere on your display, select ‘Properties’.
Find the Settings tab on the dialogue box, set the screen Resolution.
NOTES
The USB port of the TV support most hard disks, USB flash disks, etc. If the unidentified
phenomenon appears, it does not belong to the breakdown of this unit, for it has something to do
with the driver of the equipment.
NOTES

13
Basic Features
14
Basic Features
The USB port provides 5V voltage and the maximum current is 500 mA. Because the port
specification adopted by certain storage devices is different from that of the standard USB
agreement, so it may affect the correct identification of the multimedia player. This belongs to the
normal phenomenon.
Due to the difference of the equipment and the storage capacity, the time which the digital
multimedia player needs to read the information also differs. The speed of reading the information
may slow down temporarily. That is not the breakdown of this unit.
Be sure to insert the USB flash disks or
removable hard disk with standard USB2.0 port.
Press the [Source] button and Press the [▲/▼]
to select the DMP.
Press the [◄/►] button to switch to MOVIE.
1 Press to play or pause.
2 Press to stop and back to the previous folder.
3 Press to view the list of movie.
4 Press to fast backward.
5 Press to fast forward.
6 Press to view the previous movie.
7 Press to view the next movie.
8 Press to play all the movie repeatly in the current folder.Press OK to select the repeat
mode: Repeat 1/ALL/None
9 Set A-B to play repeatly. Press once to set A, and press again to set B, then press the
third time to cancel.
10 Press to display the information of the current movie(Rresolution/Size/Date/Time)
11 Press to play slower.
12 Press to play the movie step by step.(frame by frame.)
13 Press to choose the play time.
14 Zoom the picture in.
15 Zoom the picture out.
16 Press to choose the zoom mode.
17 Zoom in the picture first,then press [◄/►] [▲/▼] key to view picture.
1. Press the [OK] button to enter and all the default type of the file will display on the menu.
2. Press the [◄/►] buttons to select the drive icon and then press the [OK] button to enter.
3. Press the [◄/►/▲/▼] buttons to select the folder/file you want to open and then press the [OK] button
to enter/play the folder/file.
4. Press the [◄/►] buttons to select the Up folder to return to the previous directory.
5 Press the [Exit] button to return to the first directory.
2. Press the [OK] button to show the play menu.
3. Press the [Exit] button to exit the video control bar.
4. Press the [■] button to stop the video and return to the previous directory.
5. Press the [◄/►] buttons to select the function icon in the control bar.
6. Press the [OK] button to confirm.
7. Press the [Exit] button to exit.
1. Press the [◄/►/▲/▼] buttons to select the video you want to play.
Digital Multimedia Player
Enjoy video files
2345 6 78910 11 12 13 14 15 16 17
1