USE THE SPLIT PLATE TOP,
THE X ISOLATION PLATE AND
4 X 25MM SCREWS TO
SECURE BOTH PLATES.
USE THE SPLIT PLATE BOTTOM,
THE ARM SUPPORT WEDGES, AND
2 X 12MM SCREWS TO COMPLETE
THE BOTTOM PLATES ASSEMBLY.
AFTER ASSEMBLING THE
BOTTOM PLATE SYSTEM, SLIDE IN
THE 4 ARMS AND SECURE THEM
WITH 4 X 25MM STANDOFF AND
4 X 16MM SCREWS.
PLACE THE ALUMINUM CAMERA
PLATES AND 2 X 25MM
STANDOFF, SECURE THEM
WITH 4 X 6MM SCREWS.
