Luxier KTS13-TC User manual

1Luxier Rev.1.2 09/2016
Model Number:
KTS13-TB
KTS13-TC
KTS13-TO
Features:
- Brass and Zinc Alloy Construction
- Single Hole Installation
- Drip Free Ceramic Cartridge
- Maximum ow rate 2.2 gpm at 60 psi
- 2 Stage Sprayer Head
- Complies with:
NSF 61-9
ANSI / ASME A112.18.1
cUPC
IAPMO / UPC
CA AB-1953
Single Handle Kitchen Faucet with Sprayer
12.4”
3.3”
1.8”
7.3”
3.6”
2.2”
8.6”
8.1”
20.5”
Max. Deck Thickness 2”
* Drawing not to scale. All Measurements are pproximate.
3/8” Compression Fitting
Hose Length 25”
1 1/2” Hole Size

2Luxier Rev.1.2 09/2016
Thank you for purchasing Luxier products. Please read the information below and keep this
installation guide for future reference. If you require assistance, please contact our customer service
department at 1-877-711-8828, Monday - Friday 9AM - 5PM Paci c Time or by email at
[email protected].
Limited Lifetime Warranty (For USA Only)
The manufacturer warrants this product to be leak and drip free during daily normal household use for as long as it is
owned by the original purchaser of this product. Please keep a copy of the original invoice as proof of purchase.
Should a malfunction occur within the warranty period, Luxier USA will, as its option, (1) repair or replace the defective
part(s) or product at no charge; (2) issue a refund of the purchase price paid for the product (Valid within 30 days from
the date of purchase); or (3) issue a credit to be applied against the purchase of a new Luxier product. Shipping/delivery
charges may apply and are in Luxier USA’s sole discretion.
This limited warranty shall not apply to goods which have been subject to accident, negligence, improper installation,
product abuse, product misuse, or use of cleaners containing abrasives, alcohol or other organic solvents, whether per-
formed by a contractor, service company, or yourself, are excluded from this warranty.
Our responsibility under this warranty is limited to only to replacement parts and no other costs. Luxier USA will not be
responsible for labor charges and/or damage incurred by installation, repair or replacement, nor for any indirect inciden-
tal or consequential damages, losses, injury or costs of any nature relating to this faucet. Except as provided by law, this
warranty is in lieu of and excludes all other warranties, conditions, and guarantees, whether expressed or implied, statu-
tory or otherwise, including without restriction those merchantability of  tness for use.
This limited warranty is non-transferable. This limited warranty only applies to products purchased and installed in the
United States. This limited warranty covers the original consumer purchase only and does not include business, commer-
cial or industrial use of this product. To obtain service under the Limited Warranty, please contact Luxier USA at
[email protected]. The Luxier USA Customer Care Department will determine whether to repair or replace your
product, issue a refund, or issue a credit.
Maintenance Guide
Please follow the cleaning material manufacturer’s instructions. Damage caused by improper treatment will not be cov-
ered by product warranty. In addition, pay attention to the following points:
1. Regular cleaning can prevent mineral build up on faucet spout.
2. Carefully read the cleaner product label to ensure the cleaner is safe for use on the material.
3. Test the cleaner on a small area before using on the entire surface.
4. Use a mild detergent such as liquid dishwashing soap and warm water for cleaning.
5. Do not use abrasive / harsh chemical when cleaning the  xture as they will damage and dull the  nish.
6. When using spray cleaners, spray  rst onto a soft cloth or sponge. Never spray directly onto the faucet as droplets
can enter openings and gaps and cause damage.
7. After cleaning, rinse thoroughly with clean water to remove any cleaner residue.

3Luxier Rev.1.2 09/2016
Attention
• This installation guide is subject to change without notice, please contact customer service de-
partment to request the most updated version of this installation guide.
• This is a general installation guideline, actual installation may vary. Consult a professional if neces-
sary.
• Please read all of these instructions carefully before installing your new faucet.
• Product drawings in this installation guide is for illustration purpose only. Actual product may vary
depends on model.
• Always take extra precautions and wear appropriate safety equipment when installing this prod-
uct.
• Please follow all local building and plumbing codes.
You may need the following tools
Adjustable Wrench Teon (PTFE) Tape
Plumber’s Putty Screwdriver
Silicone Sealant
Safety Glasses
Before You Begin
• Read and understand this instructions completely before installation.
• Unpack and inspect the products from the package for shipping damage and make sure all parts
are included with the product.
• Keep the product in its package until you are ready to install.
• Make sure the installation site is clean and free of dust and debris.
• Please make sure the water supply is shut o to the installation area. If necessary, shut o the
water to the entire house.
• Turn on the water at a bathroom faucet in the house to relieve the pressure in the plumbing
system.
Important Points
• Wrap all threaded connections, except the aerator in the spout, with Teon tape. Always wrap in a
counter-clockwise direction.
• When installing your new faucet, rst hand tighten the water supply hoses then use a wrench to
give the compression nuts an additional (1/4) turn. Do not over tighten the compression nuts as it
will reduce the integrity of the sealed connection.

4Luxier Rev.1.2 09/2016
Installation
B
20
21
22
C
A. Shut o water supply at the valves.
Remove old faucet and clean the
mounting surface for installation of new
faucet.
E. Turn on water supply to check for
leaks at all connection. Remove spray
head from the pull out hose and let the
water run for about 1 minute and check
for leaks. Reattach the spray head.
D1. Apply Teon (TPFE) tape on the
shut o valves. Thread the tape in
counter-clockwise direction.
D2. Use Wrench to tighten the water
supply hoses, please do not overtighten
the connections.
B. Insert the hoses and shank through
the hole. The faucet hole on the mount-
ing surface should be 1 1/2” in diameter.
C. From under the sink, install the steel
washer (21), and nut (22) onto the
shank (20) Tighten the nut to secure the
faucet to the mounting surface.
D1
Flexible water supply line
D2 E
01. Temperature Indicator
02. Screw
03. Handle
04. Cap
05. Bonnet
06. Cartridge
07. Seat
08. Sprayer
09. Sprayer Holder
10. Hose
11. Spring
12. Swing Arm
13. Neck
14. O-ring
15. Locking Ring
16. Ring
17. Body
18. Flange
19. EVA Washer
20. Shank
21. Steel Washer
22. Mounting Nut
23. Supply Hose
24. Check Valve
25. Rubber Gasket
A
01
08
09
10
24
25
11
12
13
14 15
16
17
18
19
20
21
22
23
02
03
04
05
06
07