Manaras RADIORE901 Installation manual

RADIORE901
RADIORE901 - Universal Receiver - Universal Receiver
Replacement and Programming Instructions
Replacement and Programming Instructions
Receivers: Compatibility and Replacement
The RADIORE901 Radio Receiver is compatible with the Manaras-Opera Series “0” and “ 00” Fixed Code (Dip
Switch Technology) Radio Control Lines as well as the Series “100” Rolling Code Technology Radio Control Line.
Replacement Product Discontinued Products
Universal Receiver
RADIORE901
Universal Receiver
• Compatible with both Rolling
Code and Fixed Code / Dip
Switch Technology.
• Controls 1 Operator.
• Easy installation on wall close
to operator or directly onto
operator's control box.
• Nema 1 enclosure (N4 option
available - RADIORE 01B).
• Operates on 24VAC/VDC.
• LED indicator.
• Includes 2 mounting screws and
anchors.
• Optional commercial antenna
(RADIO02 ) and 15' coaxial
cable (CABLE015) available for
increased range and distance.
Fixed Code / Dip witch Technology
RADIO014 (MR-1000) /
RADIO015 (MRX-1000)
• Controls 1 Operator.
• Installed directly onto operator's control box.
• Includes commercial antenna for increased
range (RADIO015 / RADIORE 00A).
• Operates on 24VAC/DC.
• LED indicator.
RADIORE900 /
RADIORE900A
RADIO031 (MCR-32 N4) /
RADIO037 (MCR-32) /
RADIORE900B
• Controls 1 Operator.
• Nema 1 enclosure (RADIO037), Nema 4/12
enclosure (RADIO031 / RADIORE 00B).
• Includes commercial antenna.
• Operates on 24VAC/DC.
Rolling Code Technology
RADIOKIT005
• Controls 1 Operator.
• Operates on 24VAC/DC.
➢Replacing RADIO014/015/031/03 Receivers with a new RADIORE901 Receiver and
Pairing it to an Existing Transmitter:
1. Make sure the existing transmitter is set properly (refer to the Transmitter's Technical Note).
2. Press the LEARN button on the RADIORE 01 receiver. The RED LED will BLINK. You will have 15 sec. to
complete the pairing or you will need to restart.
3. On the existing Transmitter, press the desired Button that you wish to pair.
4. The RED LED will stop blinking. The RADIORE 01 has now been paired with the existing transmitter.
5. Only one transmitter needs to be matched per receiver. The other transmitters with the same dip switch
configuration will pair automatically.
➢To Delete All Transmitters from the Receiver's Memory:
1. Press and HOLD the LEARN button on the RADIORE 01 receiver until the RED LED BLINK (approx. 10 sec.)
(frequency of 1/3 sec. ON / 1/3 sec. OFF).
1-800-361-2260
www.manaras.com 1TN1051 REV 0 - 2018/12/03

RADIORE901
RADIORE901 - Universal Receiver - Universal Receiver
Replacement and Programming Instructions
Replacement and Programming Instructions
➢Wiring RADIORE901 Receiver with an Electronic Control Board
Figure 1 - Wiring of RADIORE901
for Open/Close/Stop Function
Figure 2 - Wiring of RADIORE901 for
O/C/S an 3-Push Button Station
Figure 3 - Wiring of RADIORE901 for
Open/Close Function
➢Wiring RADIORE901 Receiver to an Electromechanical Terminal Block
Figure 4 - Wiring of RADIORE901
for Open/Close/Stop Function
Figure 5 - Wiring of RADIORE901 for
O/C/S an 3-Push Button Station
Figure 6 - Wiring of RADIORE901
for Open/Close Function
Wiring RADIORE901 Receiver to an External Terminal Strip
Mount the receiver directly to the terminal strip provided
on the outside of the control box.
Figure 7 - Wiring of RADIORE901
on TSTRIP005
For further information, please consult the operator's Installation & Instruction Manual or contact our Technical
Support Department at 1-800-361-2260.
1-800-361-2260
www.manaras.com 2TN1051 REV 0 - 2018/12/03