Maxxhaul 70489 User manual

Read and understand this entire manual before assembling,
installing, operating, or servicing this product.
SAVE THIS MANUAL
CopyrightR2017 by Maxx Group LLC. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of Maxx
-
scribed herein. Tools required for assembly and maintenance may not be included.
Instruction Manual
&
Parts List
Tire Rack
Model 70489
Tires not included
Rev 11/17

IMPORTANT SAFETY
INFORMATION
This is a SAFETY ALERT symbol.
It is used to alert you to
potential personal
injury hazards. Obey all
safety messages that follow
this symbol to avoid possible injury or death.
DANGER indicates a
hazardous situation which, if not avoided,
will result in death or injury.
WARNING indicates a
hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION indicates a
hazardous situation which, if not avoided,
could result in minor or moderate injury.
NOTICE indicates
important information which, if not followed,
may cause damage to equipment.
SAVE THIS MANUAL
Keep this manual for the safety warnings
and precautions. The manual o󰀨ers impor-
tant information on how to assemble, use
and maintain this product.
Write the product’s model number and
purchase date on the cover page of this
manual.
Keep this manual (and your purchase re-
ceipt) in a safe place.
UNPACKING
The shipment should be thoroughly inspected as
soon as it is received. The signed “bill of lad-
ing” is acknowledgement by the carrier of receipt
in good condition or shipment covered by our
invoice. For your own protection, if any of the
goods called for on the bill of lading are shorted
or damaged, do not accept them until the carrier
makes a notation on the freight bill of the shorted
or damaged goods.
Notify MAXXHAUL immediately if any hidden
loss or damage is discovered after receipt.
DANGER
WARNING
CAUTION
NOTICE
INSTRUCTION
MANUAL
WARNING concerning Risk of Eye
Injury. Wear ANSI approved eye
protection.
WARNING concerning Risk of
Hearing Loss. Wear hearing pro-
tection.
Denition of Symbols
IMPORTANT SAFETY
INSTRUCTIONS
1. Read and understand all
safety warnings and in-
structions. Failure to follow the warnings
and instructions may result in serious injury
or death. Save all warnings and instructions
for future reference.
2. Personal and Work Area Safety
A. Always wear ANSI approved
safety goggles.
B. Always wear hearing protec-
tection when working in
noisy environments. Prolonged exposure
to high intensity noise can cause hearing
loss.
C. Use safety equipment. Safe-
ty shoes, hard hat and work
gloves must be used for applicable condi-
tions.
Model 70489 Page 2
Model 70489 Page 3
D. Dress appropriately. Never wear loose
tting clothing or jewelry when working.
Contain long hair, and keep hair, clothing
and gloves away from moving parts.
E. Use common sense when working.
Stay alert and concentrate when setting up
and using the Tire Rack. Never work while
under the inuence of alcohol, drugs or
medications.
Personal and Work Area Safety (continued)
F. While assembling and using the Tire
Rack keep work area clean and well light-
ed. Keep spectators and children out of
the work area.
3. Use of the Tire Rack
A. Do not modify the Tire Rack and do not
use this product for purposes that it was not
designed for.
B. Never exceed the maximum load capac-
ity of 300 Lbs. Center the load on the rack
to equalize torsional stress. The Tire Rack is
designed to hold 4 standard vehicle tires.
C. Be aware of the danger of “dynamic
loading”. This situation arises when a load
is dropped onto the Tire Rack, resulting in a
short term excessive load. Dynamic loading
can result in damage and failure of the Tire
Rack and personal injury to the person load-
ing the Tire Rack.
D. Keep children and spectators away when
loading and unloading the Tire Rack.
E. Only set up the Tire Rack against a wall
that has vertical studs and is capable of
supporting the weight of this product and it’s
maximum load capacity of 300 Lbs. Locate
this product in a safe area, away from all
ammable materials.
F. This product re-
quires some assembly and set-up. If you
are not experienced or capable of doing this
type of assembly and set-up work, the Tire
Rack should be assembled and set-up by a
qualied service technician.
G. Periodically check that all hardware is
tight and secure. If any damage to the struc-
ture of the Tire Rack is noted, the product
should be replaced.
H. Work safely. When drilling holes to
mount this product make sure that there are
no hidden utility lines or pipes in the drilling
path.
I. For safety, always use straps or cables
(neither included) to securely keep the tires
in place on the Tire Rack. Loop the straps
or cables through the wheel rims and around
the Horizontal Supports of the Tire Rack.
Secure straps or cables with padlock (not
included) or other locking device.
Maintain labels and nameplates on the Tire
Rack. They contain important information
and must always remain readable. Contact
MAXXHAUL for replacements.
Keep in mind that the warnings previous-
ly discussed cannot cover all possible
conditions or situations that could occur.
It is important that the person setting up
and using this product understand that
common sense and caution are factors
which cannot be built into this product,
and must be supplied by the person(s)
using this product.
Limited Warranty
MAXXHAUL warrants to the original retail
purchaser that the product is free of defects
in material and workmanship at the time of
shipment. This Tire Rack is warranteed for
90 days from the date of purchase. This
warranty is expressly in lieu of all other war-
ranties, express or implied.
Proof of purchase is required for warranty
transactions; a copy of the original invoice
or sales receipt is required.
WARNING

Model 70489 Page 4
Assembling and Setting Up the Tire Rack
Always wear ANSI approved
safety goggles.
1. Refer to photo above of an already as-
sembled Tire Rack, and other photos on this
page. Also see Assembly Diagram at end of
this manual.
2. Plan for the proper location of the Tire
Rack. The product must be attached to a
wall surface with vertical studs. The Left
Upright Support (4) and Right Upright Sup-
port (17) are mounted to the studs, and can
be positioned between 32” and 48” (center
to center) apart. Use a stud nder (not in-
cluded) to nd the desired mounting position,
and measure the desired width of the Tire
Rack depending on the size of the tires to be
placed on the rack.
Note: the Tire Rack must be mounted di-
rectly into the wall studs; do not use wall
anchors to mount to plasterboard.
3. Locate the Left Upright Support (4)
and Right Upright Support (17). With both
supports up against the wall surface, make
sure they are vertically level to each other,
and equal distance from the oor; measure
the top mounting hole position.
4. Pre-drill top mounting holes and use Lag
Screw (18) through the top mounting hole of
each Upright Support to hold in place. Do
not tighten Lag Screw completely at this
time.
5. Check to see that both Upright Sup-
ports (4, 17) are vertically level, then mark
the center and lower mounting holes for
each support. Pre-drill holes and insert two
more Lag Screws (18) in each Upright Sup-
port to secure in place. Fully tighten all Lag
Screws.
6. Connecting Small and Large Round
Tubes (16, 15) to Horizontal Supports (7).
Insert Small Round
Tube (16) into Large
Round Tube (15).
Connect the end of
each Tube to the
Horizontal Support
(7) using Bolt (11)
with Spring Washer (12). Repeat for the
other Small/Large Round Tube.
Note: Small/Large Round Tubes can be
positioned in several locations along the
Horizontal Support depending on the size of
the tires to be held on the Tire Rack.
See the information below showing rec-
ommended Round Tube locations de-
pending on the outer diameter of the tires
to be placed on the Tire Rack:
Right Upright
Support (17)
Top Mounting
Hole
Large Round Tube (15) Small Round
Tube (16)
Horizontal Supports (7)
Back Round Tubes (15/16)
Horizontal
Support (7)
Upright Support (17)
Pin Assembly
(9)
7. With assembly complete, slowly and
carefully pull up on the front Round Tube to
swing up the Horizontal Supports. Insert Pin
Assembly (9) and R-Pin (8) through Horizon-
tal Supports (7) and each Upright Support
(4, 17) to lock the horizontal support assem-
bly in place. See photo below.
8. Check for tightness of all hardware. The
Tire Rack is ready for use.
9. Carefully lift the tires onto the Tire Rack.
For safety, always use straps or cables
(neither included) to securely keep the tires
in place on the Tire Rack. Loop the straps
or cables through the wheel rims and around
the Horizontal Supports of the Tire Rack.
Secure straps or cables with padlock (not
included) or other locking device.
10. The Tire Rack can be folded up when
not in use. Simply remove both R-Pins (8)
and Pin Assemblies (9), and slowly and care-
fully lift up the back (closest to wall) horizon-
tal Round Tube (15, 16), and slowly press
down on the front horizontal Round Tube,
until the Tire Rack is folded against the wall.
See photo (upper right on this Page).
Note: May have to adjust bolt tightness
slightly to make folding up Tire Rack easier.
11. Maintenance
Before each use, check for tightness of all
hardware. Frequently check the condition
of the Tire Rack. Make sure all components
Back Horizontal Tube
Front Horizontal Tube
Model 70489 Page 5
Front Round
Tubes (15/16)
Horizontal
Support (7)
Diameter of Tires Tube Mounting Location
If between 11-3/4” and
15-3/4”
Use mounting holes 1 and 3
If over 15-3/4” and less than
22”
Use mounting holes 1 and 4
If between 22” and 26” Use mounting holes 1 and 5
If over 26” and under 30” Use mounting holes 2 and 5
R-Pin
(8)
are in good condition. If the Tire Rack be-
comes damaged through accident, or if any
damage is noted, the product should be
replaced.
Keep the Tire Rack clean of dirt, grease and
oil. Clean with a moist cloth and mild
detergent.
1
2
3
4
5

Model 70489 Page 6
SPECIFICATIONS
Maximum Load
Capacity
300 Lbs.
Width Adjustment From 32” to 48”
Capacity Holds up to 4 standard
size vehicle tires
Parts List
Part # Description Qty
Note: The Parts List and Assembly Diagram is provided as a reference tool only. Some parts are listed and shown
for illustration purposes only, and are not available as replacement parts. All repairs to this tool (including replacing
Manufactured for and distributed by: Maxx Group, LLC
300 S. Lewis Road - Suite H, Camarillo, CA 93012 USA
www.maxxhaul.com
1 Bolt M8x30 2
2 Pull Bar 2
3 Bushing 4
4 Left Upright Support 1
5 Lock Nut M8 4
6 Bolt M10x50 2
7 Horizontal Support 2
8 R-Pin 2
9 Pin Assembly 2
10 Lock Nut M10 2
11 Bolt M10x16 4
12 Spring Washer 10 4
13 Bolt M8x60 2
14 End Cap 2
15 Large Round Tube 2
16 Small Round Tube 2
17 Right Upright Support 1
18 Lag Screw M8x60 6
Assembly Diagram