Meko Blink ME20PB-BNK Series User manual

Mechanical Keyboard
User Manual
Series: ME20PB-BNK

01
Welcome to your meko Blink.
Please charge before first use.
Dimensions
Keycaps
Backlighting
USB
Hotswap
Wireless / BT
289 x 103 x 39mm
61 ABS Double Shot
SMD RGB LED
Type C
Yes
Yes
Supported Systems
Windows XP - 10
Mac OS
Linux
iOS / Android
Backlight Settings
Fn + \
Fn + .
cycle through 17 backlight eects
cycle backlight colors (RGB version only)
Fn + [
Fn + ]
Fn + ;
Fn + ‘
increase backlight brightness
decrease backlight brightness
descrease backlight speed
increase backlight speed
Need more help?
mekokeyboards.com

02
Fn + Esc
Fn + 1
Fn + 2
Fn + 3
Fn + 4
Fn + 5
`~
F1
F2
F3
F4
F5
Fn + 6
Fn + 7
Fn + 8
Fn + 9
Fn + 0
Fn + -
F6
F7
F8
F9
F10
F11
Fn + =
Fn + backspace
Fn + y
Fn + u
Fn + i
Fn + h
F12
Del
Prtsc
Scrlk
Pause
Ins
Fn + j
Fn + k
Fn + n
Fn + m
Fn + ,
Home
PgUp
Del
End
PgDn
Fn + A switch to Windows OS mode
Fn + Enter turn on/o arrow key function
Fn + lock/unlock windows key
Example
Fn + S switch to Mac OS mode
Special key functions
=1 =F1 =! ++
Multimedia functions for Mac
Mac OS only. F1 - F12 must be first function. See Function Locking

03
Fn + Ctrl (left) (1st time) activate secondary function of combination
keys (excludes arrow keys).
Fn + Ctrl (left) (2nd time) return y/u/i/h/j/k/n/m/, to primary function.
Fn + Ctrl (left) (3rd time) return all keys to primary function.
Function Locking
Bluetooth / USB
Connecting Bluetooth devices
1) Make sure switch on the bottom of keyboard is set to ON.
2) Press and hold FN + your choice of Q, W, or E for 3 seconds. The key you
selected will flicker continuously signalling it has entered pairing mode.
3) Open your device’s BT search mode to connect the device.
4) The key will stop flickering upon a successful connection.
To use in wired mode
Set switch on the bottom of Blink to OFF position & connect the USB cable.
To use in wireless mode
Set switch on the bottom of Blink to ON position & disconnect the USB cable.
Remember to pair your Blink before normal wireless use.
Your Blink can store up to 3 Bluetooth devices at a time.
Switch BT Device
Pair BT Device
quickly press FN + Q / W / E
hold FN + Q / W / E
Charging
1) The space bar will flash 3 times when plugged first plugged in.
2) When the space bar flashes 5 times continuously, the battery is full.
3) If there is no operation for 3 minutes, your Blink will turn o
automatically to save power. Press any key to wake it up.