Milwaukee 58-01-0560 User manual

WIRING INSTRUCTIONS
I 'T2
t
‘FIELD AND BRUSH HOLDER WIRES
SHOULD BE TIED TOGETHER WITH
WIRE TIE 23-78-0100 JUST BELOW
REVERSE SWITCH HOUSING INSUL-
SLIP INSULATING SLEEVE 23-48-7380
OVER WIRES NO.1 AND N0.2. RUN
SLEEVING ACROSS BOTTOM EDGE OF‘
HOUSING RIB AND UNDERNEATH FIELD.
USE INSULATOR 23-16-0200 BETWEEN
MOTOR HOUSING AND REVERSE SWITCH
HOUSING.
‘WHEN PLACING SWITCH INTO,SWITCH
HOUSING, PLACE INSULATOR 23-16-
0470 AROUND SWITCH AS SHOWN.
USE LOCK WASHERS UNDER
ALL SWITCH TERMINALS.
WHERE TERMINAL AND CONNECTOR COMBINATIONS ARE SPECIFIED, SEE ELECTRICAL PARTS CHART
FOR PART NO. AND QUANTITY AND DRAWING FOR ACTUAL HOOK-UP
WIRING SPECIFICATIONS
White 3 16 7 X
Yell0V/ 4 Fld. 7 x
Block 5 16 2-l/2 x
Yellow 6 16 5 X
i- connector Wire J$’ Gas ‘;;h. Term
T4 CllC2 C3 C4 Color . . Tl T2
Yellow 7 16 !j X
X Block 8 Cord 6 X
! I White 9 Cord 6 X
! !
Green t 0 Cord 3-l/4/ X
i-4 71) ! !
& I
l-3
-
-
Wire Wire Ga Lgth.! Term
Color No. * in, Tl T2
Black 1 Fld. 10 X
Red 2 16 9-l/2
&
T3
-
IRE
r- Connector
l-4 .l c2 c3
I i
1-
I !
! i
! !
4
Tl 23-74-0050 9
T2 23-74-0330 I I
4
I I
CONNECTOR DESCRIPTION
Code Part No. Qnty.
Cl 23-74-0370 1
SWITCH DESCRIPTION
Code Part No. QI=Y.
Sl 23-66-0340 I
S2 Refer to Parts List 1
Form OE-24