MindMe Pro LS Instruction manual

Charging
On/Off
button
It is a good idea to charge the MMPLS next to the wearer's bed. That way when the wearer goes to bed the MMPLS
can be placed on the charger and be fully charged, ready to go when the wearer gets up in the morning. This
method also helps in create a routine for the wearer as well as the carer.
When charging, LED flashes periodically, once
fully charged the LED light remains on
Before using your MMPLS please charge the
watch for3-4 hours.
After charged to 100% the battery will last up to
24 - 48 hours.
When the battery charge falls below 20% the
MMPLS will SMS an alert to the primary number
on your MMPLS .
QUICK USER GUIDE - MindMe Pro LS
The MindMe Pro LS (MMPLS)
combines a mobile phone, a GPS
device, and GPRS satellite
technologies to assist in tracking
and monitoring vulnerable
individuals in one easy to use
solution
The MMPLS may take up to 30 secs to
boot up
Starter Guide
P: 1300 776 907
E: [email protected]
W: www.mindme.com.au
Turning ON MMPLS
MindMe Pro LS Overview
Press and
hold down the
On/Off
button. The
MMPLS will
vibrate and
sound with
tune
NOTE
1
Match the charging points on the
back of the MMPLS with the
charging points on the magnetic
charging cable head
NOTE
Charging
Cable
Charging
head
LED light will flash

NOTE
Sends an SMS to the primary contact and
includes a google maps link. Also sends an
alert to the mobile APP confirming when the
wearer has breached the virtual perimeter
(either out or in of the perimeter)
QUICK USER GUIDE - MindMe Pro LS
Emergency contacts can be either
mobiles and landlines. Only the
primary number with a mobile phone
will receive an SMS with the alerts
and a Google Maps link. All
emergency contacts will receive an
alert via the mobile APP (note:
Emergency contact needs to be
logged into mobile APP to receive
alerts)
Alert SMS is sent tothe
primary emergency contact
(including the date, time,
google maps locationof the
MMPLS). Also sends an alert to
the mobile APP
If a false alert is detected, the
wearer can cancel the alert by
quickly pressing the SOS button.
The GEO fenceperimeter can be set at a
minimum of 200m from the point location. i.e.
200m from front gate of house
If the GEO fencing feature has been
requested upon purchase, please contact
MindMe on 1300 776 907 to assist with initial
setup.
NOTE
Starter Guide
P: 1300 776 907
E: [email protected]
W: www.mindme.com.au
Using the MMPLS 
Emergency Procedure
Press and hold SOS button
for 7 seconds. The LED
light will flash for 3 secs
and an audible ring will
sound. This initiates
theemergency procedure
2
Fall Detection Procedure
The wearer falls, the
MMPLS registers a
fall and a chime will
sound
Sends an SMS to the
primary contact and
includes a google maps
link. Also sends an alert to
the mobile APP
NOTE
Call cycle begins. First SOS
contact # is called. If call is
unanswered, the call moves
to the next SOS contact # in
sequence of order within 12
secs
Call cycle begins. First SOS
contact # is called. If call is
unanswered, the call moves
to the next SOS contact # in
sequence of order within 12
secs
GEO Fencing Procedure
Wearerbreaches thepre-set
GEO fence virtual
perimeter(eitherout or in of the
perimeter)
NOTE

Password
Area
QUICK USER GUIDE - MindMe Pro LS
Starter Guide
P: 1300 776 907
E: [email protected]
W: www.mindme.com.au
3
Getting a GPS reading
Prior to using your device you will need to get an initial fix for GPS,
turn on the MMPLS and either take the MMPLS outdoors or place it
near a window so the MMPLS can get a fix on the satellites. This
could take up to 10 minutes.
To monitor and program the MMPLS, you will need to download and log into the mobile APP (AIBEILE Plus). Your
username and login details are detailed on the setup sheet provided.
Download the Aibeile Plus mobile
APP from the Apple Store or
Google Play
MMPLS Mobile APP
Enter the 'Login ID' and 'Password' which are detailed on
the 'Setup and Overview sheet' provided ( PLEASE DO
NOT use your own email address to login)
Ensure that 'Asia and Oceania' is selected in the 'Area'
section
Press 'Login', you will automatically be redirected to the
homepage which is a map of the devices location
Open the Aibeile Plus app and follow the instructions below:
Login ID
Login
Abeile Plus is
designed for the
emergency contacts
to monitor and
change device
settings, the wearer
is NOT required to
download Aibeile
Plus to operate the
MMPLS.
NOTE
If this is not completed prior
to use, you may not get an
accurate GPS location.
NOTE
Downloading & Log into MMPLS Mobile APP
Cancelling a false alert
In circumstances
where the SOS or fall
alert has been
accidentally
activated, press the
'On / Off' button to
cancel the alarm.
On/Off
button
Checking the MMPLS is turned on
Tap the 'SOS
button' for 1 sec. If
the device is
turned on, the
blue LED light will
flash.
SOS
button

Settings: Allows various settings/features to be
programmed including SOS #'s, fall detection &
phone book
GEO fence: Displays a pre-programmed or add
a GEO fence
Medicine notifications: Displays a pre-
programmed or set up of medication reminders
More: Press the icon to access features including:
Call number: Press the icon to make standard
phone call to the MMPLS. Once answered, a 2 way
conversation can take place between the caller
and wearer.
Locate: Press the icon to update the current
location of MMPLS.
Envelop Icon: Press this icon to view a list of
previous alerts that have been activated by the
MMPLS. Alert type, time and date will appear.
QUICK USER GUIDE - MindMe Pro LS
Starter Guide
P: 1300 776 907
E: [email protected]
W: www.mindme.com.au
3
Address bar: Displays the address where the GPS
satellites last registered the MMPLS. The GPS
feature will automatically update every 10 mins.
Mobile APPhome screen overview
History:  Press the icon track the travel history of
the watch.
Below is an overview of some commonly used Aibeile Plus
features and settings to assist in managing the MMPLS
Map & locator icon: A map of the MMPLS location
will appear. It will detail the MMPLS current battery
level and the time and date that the MMPLS last
connected with the GPS satellites.
Changing Emergency Contact #'s Changing fall sensitivity
To change any settings or features, the
MMPLS will need to be turned on
NOTE
Select the 'More' icon from the
homepage, then select 'Settings'
from the options list.
From the 'Settings' menu, select the
'SOS number' option. A pop up box
will appear, add or remove
emergency contact #'s as desired
and select 'Ok'. A grey pop up box
displaying 'Set Ok' will appear if the
changes have been successful.
More
menu Settings
menu
From the 'Settings' menu,
select the 'fall notification'
option.
Select the 'Sensitivity' option. Then
select the desired sensitivity from
the drop down box (1 most, 6
least sensitive, level 5 is
recommended), press 'Ok' and
'Save'. A grey pop up box
displaying 'Set Ok' will appear if
the changes have been successful.
Enter
SOS #'s