Mobile Crossing WayPoint 200 User manual

6
8
3
2
Insert Battery.
Open Cover
Turn On Switch.
Press Down
Slide In.
2
4
5
Press button
to release
PDA from
car mount.
3
Squeeze
BOTH sides
to secure.
Charge
Minimum 8 hours
before using.
1
AUnpack and check contents
7
C
After charging, turn on the
WayPoint. (Using the power button
on the front, top right of the pda).
Click the keyboard
button in the lower right
corner of the screen.
68
When
on the road, the
travel adapter (8)
turns the AC adapter
(6) into a portable
wall charger.
E
4
B
1
6
1
1 2
Boxes 14 16 17
13 15
18
12
11
Insert the CD-ROM (9) into
a drive on your computer.
Follow the instructions on the
screen to install OUTLOOK
and ActiveSync.
Insert the USB cable (15) into a
USB slot on your PC.
D9
15
Optional: When Installing Cradle
for Computer Setup (Step D).
Insert cables (4) and (6).
Bottom View
18
6
15
10
13
13
11
14
1
1
Attach Velcro (12)
to bottom of BT GPS.
Attach matching
Velcro (12) to dashboard
near windshield.
12 4
16
Connect cigarette lighter
plug (14) to lighter socket.
Turn knob
to tighten.
17
14
5
9
Push
to navigate.
Turn on
switch.
7
©Copyright 2004 Mobile Crossing www.mobilecrossing.com
10
!
!
Follow the screen directions to calibrate.
If you do not intend to use this unit with a personal computer then skip step D.
Tap here to set
owner information.