Mobilebase ds3 User manual

DS3 / DS31 User Manual
DSIC CO., LTD
• Please read the following warnings before using the product..
• Contents of manual may differ based on the software version of products.
•Please visit web site(www.mobilebaseglobal.com) for the more detailed information.

< Table of Contents >
Notice 2
Cautions and Instructions 3
1 Understanding the Product 5
1.1 Components 6
1.2 Closed view of product 7
1.3 Install/Remove the Battery 9
1.4 Charging the Battery 10
1.5 Using SD Memory 11
1.6 Reset(H/W and S/W) 12
2 Basic Use 13
2.1 Display Calibration 14
2.2 Using Keyboard 15
3 Communication 16
3.1 Using Wireless LAN 17
3.2 Using Bluetooth 19
4 Scanner and Camera 20
4.1 Using Barcode Scanner 21
4.2 Using Camera 22
5 Connecting ActiveSync 25
5.1 Installing ActiveSync 26
5.2 Using ActiveSync 27
5.3 Solving Problem 28
6 Technical Support 29
1

2
< Notice >
!Please read “Caution and Instruction” and conform according to the direction.
!The contents in manual could be modified without pre-notice and different according to PDA software version.
!The figure and color of components could be different with the actual.
!Unauthorized copying, transferring, or deletion is strictly prohibited.
!Microsoft, Windows, Window Logo, Windows CE 5.0 Logo, ActiveSync, Microsoft Office, Outlook and Internet
Explorer
are registered trademarks of Microsoft Corporation legally protected by law.
!This manual is protected by Copyright Laws.

3
< Cautions and Instructions >
!In order to use the product properly and safely and to prevent accidents in advance,
Please follow the guidelines indicated bleow.
User Cautions - Please use the authorized battery and accessory, which provided with PDA.
* For a defect by using a non-authorized equipment, You can not receive A/S.
- Please do not modify the product at discretion.
* It could create a fire, an injure, an electric shock and have the product damaged
* Also, You can not receive A/S for a defect, which is generated by modification.
Keeping Caution - Please don’t input an impact like drop and not use in environment with high temperature and humidity.
- Please full charge the battery before first using.
Use prohibited - Please do not use in dangerous areas explosive, such as construction, gas station, etc.
* Please accordingly observe the rule, instruction and signal in the areas.
* During refueling, Please turn off phone function for safety.
- Please prohibit using PDA and related things while driving. It could cause danger.
- Please turn off the PDA when boarding an airplane and in hospital
* Electromagnetic waves of phone function could effect a certain flying and hospital equipment.
- Please turn off the PDA in other restricted areas.
* A problem or danger of electromagnetic waves could occur.

4
< Cautions and Instructions >
Precaution
for Product
- Please don’t put PDA, battery and charger in or near heating equipment such as stove, microwave oven.
* It could bring on fatal injury. In addition, Could cause product explosion, transformation or a certain defect.
Furthermore, Free repair service is not provided.
- Please don’t use PDA with any other purpose except for the original.
Precaution
for Battery
- In case of battery that is damaged, impacted, heat and submerged, it could explode.
- You should never use a transformed or damaged battery.
- Use only original or authentic batteries and adaptors, and do not use them for applications other than those of the PDA.
(If you do otherwise there is a risk of explosion or possibilities for shorter durability of the PDA, battery, and adaptor.)
- You should use authorized adaptor and charger when charging.
If otherwise, the battery life get shortened or could be exploded.
- A damage could be occurred when you compulsory install the battery.
- You should change the battery after power-off. It causes a damage or software problem.
- Please be careful that key, coin or other metal material is not connected to battery’s terminal.

5
1 Understanding the Product
1.1 Components
1.2 Closed view of Product
1.3 Install/Remove the Battery
1.4 Charging the Battery
1.5 Using SD Memory Card
1.6 Reset(H/W and S/W)

[ DS-3 PDA ] [ Cradle ] [ Battery ] [ Stylus Pen and String ]
[ Power Cable ] [ USB Cable ] [ Ear Microphone(Options) ] [ User Manual ]
●●
6
1 Understanding the Product
1.1 Components

1.2 Closed view of Product
Status LED
(Modem/Barcode Scan)
LCD Touch Screeen
Keypad
Microphone
Voice call Speaker
Barcode scanner
button
Cradle
connector
Stylus pen
Barcode
scanner
Reset
Flash
Camera lenz
Handstrap Battery cover
Sound speaker
24-pins Connector
(Charging/Data Comm./
Connecting Cable)
7
[ PDA Body]
Volume Up / Down
Ear Microphone
jack
Barcode scanner
button
Camera
button

1.2 Basic Terms
[ Cradle ]
Charging Status LED
Connecting
Connector
Extra-Battery
Charging Part
USB
Connector
(Host)
Power
Connector
USB
Connector
(Client)
8

1.3 Install/Remove the Battery
9
①Install battery by making connector upward.
②Close battery cover
③Push the locker to left side
④Fix the hand strap on back of body.
①Separate the hand strap
②Push the locker to right side to unlock
③Pull out the battery cover by using groove
④Pull out the battery
⑤Release the battery lock and remove.
[ Install the Battery]
[ Remove the Battery]
*P.S : when battery is installed or removed, power-off should be required.

1.4 Charging the battery
[ Charging by Cradle]
①Connect the power cable to the connector of cradle
②Mount the PDA body to Cradle
③During the charging, it displays in red color.
When the charging completed, it turns to green color.
<Caution>
Don’t use any other power cables, except for the authorized
cable .
②
①
Charging status LED
10

1.5 Install & Remove Micro SD Card
①Pull out the battery
②Inset a SD card.
③Install the battery back.
④Fix a hand strap on PDA..
<Caution>
•Please power-off before installing or removing the battery
•Since battery should be removed when SD card is installed
and removed, save all data in operation.
•Please be careful of the direction of Micro SD card
①Pressing the Micro SD card inserted, a part comes out.
②Pull out the Micro SD card
③Install the battery
11
[ Install SD Card ]
[ Remove SD Card ]

1.6 Reset(H/W and S/W)
①Please press [reset] button at the front of the body
using the stylus pen
②Programs currently in use will be shut down and data or
file can be deleted. However, Saved files are out of
effect.
①Press Power button + [reset] button
②All data and programs will be initialized expect for
just data saved in Flash Disk
< Caution >
•Please back-up data in you need before operating [reset]
12
[ Software Reset ]
[ Hardware Reset ]

13
2 Basic Use
2.1 Display Calibration
2.2 Using Keyboard

14
[Start]
2 Basic Use
2.1 Display Calibration
[ Display Calibration ]
①Execute the Display Calibration when correct position is not
selected with using stylus pen.
②When H/W reset done or when needed, please execute
[start]-[setting]-[control panel] in stylus properties.
③If you press [+] for over 1 second, [+] move to the next.
Then, Act the same along with [+]
④If all process done, Automatically, Display Calibration ends.
Then, Confirm if input is correct.
< Caution >
•When manipulating LCD display, do not another except stylus
pen.
(LCD Screen could be flow or PDA [reset] button could be
damaged)

2.2 Using Keyboard
①When inputting a letter, you can use keyboard function.
②Press [keyboard] icon with stylus pen in taskbar.
③If pressing a button in [keyboard screen], the
appropriate letter is input.
[ Using Keyboard ]
18 15

3 Communications
3.1 Using Wireless LAN
3.2 Using Bluetooth
16

17
3.1 Using Wireless LAN
[ Wireless LAN ON/OFF]
< Reference >
•Wireless LAN supports IEEE 802.11 b/g
•To connect the wireless LAN, There should be AP(Access
Point) to support 802.11 b or 8002.11.g around.
•Please use the wireless LAN after manually or
automatically setting-up IP.
[Wireless LAN ON/OFF]
①After pressing the spanner icon in taskbar and selecting the
Wireless LAN, and pressing the ON/OFF icon.
②If Wireless LAN is correctly connected, Antenna icon is
appeared in taskbar.
[AP Access]
To connect AP, Wireless LAN should be ON.
①If pressing the Antenna icon double click, the Wireless LAN
Connection display is appeared.
②Move [Profile] tap, and press [Scan] button.
③After few seconds, the pop-up window of AP list and select
one of them and press [Configure] button.
* Wireless LAN function is just available with a product with a built-in Wireless LAN module.(Option)
[ AP Access ]

①Press “Yes” in pop-up window about creating a new profile.
②Write the setting password of AP and press the OK button.
③To save the all settings, press Commit button.
④Move the [Main] Tab and select the settings of AP from
Active Profile.
3.1 Using Wireless LAN
18

3.2 Using Bluetooth
[ Bluetooth On/Off ]
[Bluetooth On/Off]
①After pressing the spanner icon in taskbar and selecting the
Bluetooth, and pressing the B ON/OFF icon.
[Bluetooth Device Search]
①Press the [Device search] after executing [Bluetooth
manager] in [Control Panel].
②Select one of the Bluetooth devices.
* Bluetooth function is just available with a product with a built-in bluetooth module.(Option)
[ Bluetooth Device Search ]
19