Mothers choice 13208 Guide

An IGC Dorel brand
Instruction Manual & User Guide
Combo Changetable
Please read this manual in its entirety before assembling the
product and follow all instructions contained herein.
Do not use this cot if any part is Broken, Torn or Missing.
Please retain instruction manual for future reference.
Illustrations are representative only.
Design and style may vary.
IMPORTANT: RETAIN FOR FUTURE REFERENCE.

2MC Combo Changetable 05-13
Instruction Manual & User Guide
page 3
page 4
page 5
page 6
page 7
page 8
page 9
page 10-11
Page 12
• WARNINGS
• Component list
• Assembling
Step 1. To aach side rails
• Step 2. To aach shelf inserts
• Step 3. To t the remaining side rails
• Step 4. To t the foot board
•
• Step 5. To t the swivel wheels
• Step 6. To check that the change table is
• safe to use
• To apply the brakes
• To secure your child
•
• Notes
•
• Product care and maintenance
• Customer service
Table of Contents
This instrucon manual applies to the following
model numbers:
# 13208 Mother’s Choice Combo Changetable (walnut)
# 13209 Mother’s Choice Changetable (white)

MC Combo Changetable 05-13 3
Instruction Manual & User Guide
“IMPORTANT. READ CAREFULLY BEFORE USE AND RETAIN FOR FUTURE REFERENCE.”
These instructions detail the safe use, assembly and maintenance of your product.
Please read these instructions carefully and ensure that they are followed at all times.
• Follow the manufacturer’s instructions.
• Donotleavechildrenunattended.
• Donotusetheunitonanelevatedorunevensurface.
• Useonlyonaleveloor,inasafearea.
• Donotusethischangetableifanypartisbroken,damagedormissing.
• Followthemanufacturer’sinstructionsatalltimes.
• Wherepresent,usethesafetybeltatalltimes.
• Donotusetheunitnearanopenre,barbecue,orexposedame.
• Theunitisdesignedforonechildonly.
• Ensurethattheunitiscompletelyassembledandcheckthatallpartsare
 securelytightenedbeforeplacingachildonthetable.Screwsshallnotbeloose 
 becauseachildcansqueezepartsofthebody,orclothing(egstrings,necklaces,
 ribbonsfordummies,ect)couldgetcaught.Theremaybeastrangulationhazard.
• Regularlyinspecttheunitforanypartsthatareloose,broken,tornormissing.
 Attendtotheproblemassoonasitisnoted.
• Donotmovetheunitwhilstachildisonit.
• Whereapplicable,applyallthebrakesonthecastorwheelswheninuse.
• Replacethechangepadifitistornordamaged.
• UseonlyapprovedsparesandaccessoriessuppliedbyIGCDorelfortheunit.
• Thisunitisnotintendedforcommercialuse.
• Stopusingwheninfantstartstoroll.
• Toavoiddangerofsuffocation,keepanyplasticbagsawayfrombabies
and children.
•  Stopusingwheninfantstartstorolloramaximumweightof15kg.
• Achangingpadmustbeusedwiththistable.Thepadshouldtsnuglyinto
 thetabletoprecess.Recommendedsize:
750mmlongx500mmwidex30mm(Max) thick.

4MC Combo Changetable 05-13
Instruction Manual & User Guide
Components List:
Safetybeltx1
Fasteningscrewsx2
(preassembledto
topsiderail)
SideRails(Top)
x2
SideRails(Shelf)
x4
AllenheadBoltandBarrelNutx12
Castorsx4
ChangeTableShelf
Insertsx3
Footboard
Headboard
TOOLS REQUIRED:
HARDWARE:
Allenkey(supplied) Flatbladescrewdriver
forliningupbarrelbutslots
(notsupplied)
1Headboard
1Footboard
3ShelfInserts
2SideRails(Top)
4SideRails(Shelf)
1SafetyBelt
4Castors
TIMBER COMPONENTS REQUIRED FOR CHANGETABLE
Changetable Changetable

MC Combo Changetable 05-13 5
Instruction Manual & User Guide
STEP 1- TO ATTACH SIDE RAILS
• Lay one side rail(top) and two side rails(shelf) on a carpeted oor with grooves
facing up, as per Figure 1.
• With the headboard laying on it’s side, align the side rails with the headboard nong
the side rail(top) goes to the top, followed by two side rail(shelf), as per Figure 2.
• With one allen head bolt and one barrel nut for each joint,
assemble as per Figure 2A.
Assembling: Combo Changetable
Figure 2
Figure 1
Figure 2A
Tools/Hardware
required:
It is recommended that two people are needed to safely assemble
this product.

6MC Combo Changetable 05-13
Instruction Manual & User Guide
Assembling: Combo Changetable
Tools/Hardware
required:
STEP 2 - TO ATTACH SHELF INSERTS
Figure 3
AA
BC
A
BB
CC
Ifitisdifculttottheshelfinsertsbetweenthechangerends,
loosenthexingboltsslighty.
• Place one shelf insert A into the grooves in the side rails B and back panel C located
at the top of the head board, and repeat the same acon with other two shelf inserts,
as per Figure 3.
Ensure that the changetable shelf insert with the printed warning is installed
at the top facing upwards.

MC Combo Changetable 05-13 7
Instruction Manual & User Guide
Assembling: Combo Changetable
STEP 3 - TO FIT THE REMAINING SIDE RAILS Tools/Hardware
required:
Figure 4A
• Lay one side rail(top) and two side rails(shelf) on a carpeted oor
with grooves facing down, as per Figure 4A.
• Align the side rails with the headboard nong the side rail(top) goes to the top,
followed by two side rail(shelf), as per Figure 4.
• With one allen head bolt and one barrel nut for each joint ,
assemble as per Figure 4.
Figure 6
Figure 4

8MC Combo Changetable 05-13
Instruction Manual & User Guide
Assembling: Combo Changetable
STEP 4 - TO FIT THE FOOTBOARD
•  Laytheassemblysothattheheadboardislyingfacedown,andtheshelf
 insertsandSiderailsarepointingupwards.
•  Placethefootboardontopoftheassemblysothatthegroovesarefacingtheshelfinserts.
•  Arrangethecomponentssothatthefootboardtsontothesideraildowelsandthe
 shelfinsertstintothegrooves.
•  Slidethebarrelnutsintotheirholessothattheirgroovesarefacingoutandalignedwiththe
Ssiderail.SeeStep1 for further instructions.
•  Slidetheallenheadboltsintotheirholes,andscrewin.
•  Standtheassemblyupright.
•  Ensurethattheshelfinsertsarelocatedintheircorrespondinggrooves,asperFigure 5.
• Tightenallboltsbeforeusing.
Tools/Hardware
required:
Figure 5

MC Combo Changetable 05-13 9
Instruction Manual & User Guide
TO SECURE YOUR CHILD
• Theharnessstrapscanbeadjustedbymovingeachstrap’sslider.
• Thebuckleisreleasedbysqueezingthebuckletonguestogether.
Assembling: Combo Changetable
Figure 6
STEP 6 - TO CHECK THAT THE
CHANGETABLE IS SAFE TO USE
• Standtheunitupright.
• TightenallscrewswiththeAllenKey.Donotovertightenthescrews.
• Ensureunitisstable.
• FitaChangingPadsnuglyintothetabletoprecess.Recommendedsize:750mmlongx500mm
 widex30mm (Max)thick.
TO APPLY THE BRAKES
• PressDown on the small tab on the castor and Uptorelease,
asperFigure 7.
Figure 7
Use this harness at all times.
STEP 5 - TO FIT THE SWIVEL WHEELS
• Insertthecastorspindleintotheholeineachleg’send,
asperFigure 6andpushinalltheway.
•Checkthatthecastorsareproperlyinsertedbyattempting
togentlyremovethem.

10 MC Combo Changetable 05-13
Instruction Manual & User Guide
Notes:

MC Combo Changetable 05-13 11
Instruction Manual & User Guide
Notes:

12 MC Combo Changetable 05-13
Instruction Manual & User Guide
Product care and maintenance
• Alwaysstoretheunitinacleananddryplace.
• Donotuseabrasivesordetergentsontheunit’ssurfaces.
• Scuffmarkscanberemovedwithmildsoapandwarmwater.Drywithasofttowel.
• Occasionalapplicationoffurniturepolishwillmaintainthenishofyourunit.
• Regularlycheckallboltstoensuretheyaretight.
• Damagedcomponentsshouldbereplacedasrequired.
• ReplacementpartsareavailablefromtheIGCDorelCustomerServiceDepartment.
Customer service
PleasecontactourCustomerServiceDepartmentifyouexperienceaproblemwiththisproductor
requireassistance:
Specicationsaresubjecttochangewithoutnotice.
Copyorreproductionwithoutpermissionisprohibited.
©2011IGCDorelPtyLtd.AllRightsReserved.www.igcdorel.com.au
Email
Web
Phone 1
Address
Phone 2
Hours
Postal
NEW ZEALAND
CUSTOMERS
[email protected]
www.igcdorel.com.au
(09)2741040
14SirWilliamAvenue,EastTamaki,
Auckland,2013.
0800628000(TollFree)
8:00am–4:00pm,MondaytoFriday.
IGC Dorel New Zealand Ltd
P.O.Box82377HighlandPark
MtWellington
New Zealand
AUSTRALIAN
CUSTOMERS
[e-mail]
www.igcdorel.com.au
(03)83115300 
655-685SomervilleRoad
SunshineWest,Vic,3020 
1300809526(localcallcost)
8:30am–4:30pm,MondaytoFriday
IGCDorelPtyLtd
P.O.Box1260
SunshineWest,Victoria,3020
Australia