MstrWood Multi Triangle Installation instructions

Multi Triangle User Instruction
What’s included:
RECOMMENDATIONS:
● The climbing triangle
should be assembled
by a competent adult.
● Regular checks should
be carried out before and
during use to ensure safe
use the triangle.
● Watch your children
during games! Always be
vigilant during games!
Leg pair
4х
Assembled side part
with tension rope
1х
Rungs
13х
For triangle fixing plates
Screws
(7 х 70)
12х
For rungs and leg pairs
Screws
(7 х 50)
12х
Allen key
1х
MstrWood
Triangle
fixing plates
6х
NOTE:
Ensure dowels are poshed home in their recesses before tightening
screws ‒ a gentle tap with a small rubber mallet
or the heel of your hand should help.
All our products can be used outdoors only in dry weather!
For assembly, it is recommended to use a screwdriver
or an electric screwdriver.
CAUTION
CONTAINS SMALL PARTS
Adult supervision required
The quality of the triangle depends on the assembly sequence.
We recommend using the triangle complete with a ramp or an arch.
It will provide maximum stability of the triangle.
Do contact us if you are unsure of the assambly instructions.

STEP 1: Unscrew the screw STEP 3: Install a rung. Fix on both sides
STEP 4: Assemble from both sides, install the rungs
STEP 2: Install the triangle fixing
plates, screw the screw back.
Side plank beveled inward
Don’t twist parts completely!
The design should not be tightly fixed. When all the screws are in, place the triangle
on a flat base and press on it from above. The triangle will take the correct position.
All details will fall into place. Tighten the screws fully.