MTS Systems Electronic keyboard User manual

Congratulations!
Care of Your Keyboard
Your keyboard will give you years of playing pleasure if you follow the simple rules given below:
Location
Do not expose the unit to the following
conditions to avoid deformation, discoloration, or
more serious damage.
!Direct sunlight.
!High temperature (near a heat source, or
expose under the sun inside ).
!Excessive humidity.
!Excessive dust.
!Strong vibration
a car
Power Supply
!Turn the power switch OFF when the
instrument is not in use.
!If an AC adaptor is used, it should be
unplugged from the AC outlet if the
instrument is not to be used for an extended
period of time.
!Unplug the AC adaptor during electric
storms.
!Avoid plugging the AC adaptor into the
same AC outlet as appliance with high
power consumption, such as electric
heaters or ovens. Also avoid using multi-
plug adaptors since these can result in
reduced sound quality, operation errors, and
possibly damage.
Turn Power OFF When Making
Connections
!To avoid damage to the instrument and
other devices to which it is connected, turn
the power switches of all related device OFF
prior to connecting or disconnecting cables.
Handling and Transport
!Never apply excessive force to the controls,
connectors or other parts of the instrument.
!Always unplug cables by gripping the plug
firmly, but not pulling on the cable.
!Disconnect all cables before moving the
instrument.
!Physical shocks caused by dropping, bump-
ing, or placing heavy objects on the instru-
ment can result in scratches and more
serious damages.
Cleaning
!Clean the cabinet and panel with a dry soft
cloth.
!A slightly damp cloth may remove stubborn
grime and dirt.
!Never use cleaners such as alcohol or
thinner.
!Avoid placing vinyl object on top of the unit
(vinyl can stick to and discolor the surface).
Electrical Interference
!This instrument contains digital circuitry and
may cause interference if it is placed too
close to radio or television receivers. If this
occurs, move the instrument farther away
from the affected equipment.
Thank you for choosing this is user-friendly but professional keyboard. This keyboard is produced in
high-powered, large capacity and large-scale integrated circuit.
It includes 310 voices, 160 styles, 120 songs and 5 demo songs with hi-quality PCM voices that could
perfectly express your performance. It also includes an USB port, which allows you to connect computers
easily.
Before you use the electronic, we recommend you to carefully read through this manual. Please keep this
instruction manual for futrue reference.
1

Main Features
Keyboard:
61 keys touch keyboard, 3 touch levels.
Display:
8 characters, segment code, icon and white backlit.
Operation system:
User-Friendly interface, numeric keypads or [+/YES] / [-/NO] button for selection of styles, songs and voices.
No of Voices:
310 with 10 groups of percussive voices.
No of Styles:
160.
No of Songs:
120
No of Demo Songs:
5
Types of Chord:
Auto single/multi-fingered judgment.
Recording:
Record using REC and PLAY button.
Main Functions:
TUNING SPLIT POINT, MIDI, MODULATION/PORTAMENTO, PORTAMENTO TYPE, and DSP.
Memory:
A total of 4 banks, 6 memories in each group.
Mixer:
Adjust volume of each track (RHYTHM, BASS, ACCOMP, LOWER, UPPER)
Styles Control:
SYNC, START/STOP, FILL IN A/NORMAL, FILL IN B/VARIATION, INTRO/ENDING, FADE.
Other Functions:
DUAL, LOW VOICE, SUSTAIN, TOUCH, PIANO, DEMO, MODULATION.
2
Pitch Bend Wheel.
Direct Selective Functions:
TRANSPOSE,OCTAVE,DSP ON/OFF,TOUCH,SUSTAIN,METRONOME,MIXER
RHYTHM, BASS, ACCOMP, LOWER, UPPER .
Jacks:
1.USB: connecting PC with the USB port to perform MIDI IN/OUT function.
2. Pedal jacks (to control sustain, volume).
3. Phone jack.
4. Accessorial jacks.

Contents
3
General Guide
Power supply
1.Using the AC adaptor
2.Using batteries
Connectors
1.The headphones jack
2.The Aux.Out jack
3.The sustain pedal
4.The volume pedal
5.The USB jack
Selecting & Playing voices
1.Voice numeber
2.Voice setting
Voice and Effects
1.Dual voice
2.Split/lower voice
4.Sustain
5.Touch response
6.Transpose
7.Octave
8.Modulation
9.Pitch bend
Selecting & Playing a Style
1.Style number
2.Style setting
Style Control
1.Start the style
2.Fill IN A/B
3.A.B.C
4.Tempo
5.Fade
Function Menu
1.Master tune
2.Beat
3.Split point
4.MIDI channel
5.Portamento and Modulation
6.Portamento type
7.DSP effect
Mixer
DSP
Metronome
Piano
Memory
1.Memory bank
2.Store/load parameter
3.Memory data
O.T.S function
Recording
1.Record waiting
2.Record start
3.Record stop
4.Record playback
Demo
Song
Chord Dictionary
MIDI function
1.How to use the USB
Specifications
Appendix 1-Voice list
Appendix 2-style list
Appendix 3-Demo list
Appendix 4-Song list
Appendix 5-Chord list
Appendix 6-MIDI list
4
5
5
5
6
6
6
6
6
6
7
7
7
7-8
7
8
8
8
9
9
9
9
10
10
10
10-12
10-11
11
11
12
12
13-14
13
13
13
14
14
14
15
15-16
16
16
17
17-18
17
17
18
18
19
19
19
19
19
20
20-21
22
23
23
24
25
26
27
27
28
29

FADE
FUNCTION
/ BACK
ONE TOUCH
SETTING
O.T.S.
TEMPO
DEMO
FUNCTION
/ NEXT
VOICE
SONG
VOLUME
POWER
ON
OFF
RHYTHM BASS LOWER UPPER
DUAL LOWER TOUCH SUSTAIN DSP
OCTAVETRANSPOSE
METRO
PIANO
STORE
MEMORY
BANK
ACCOMP
MIXER
MIN MAX
5
4
2
1
3
6
8
7
0
9
YESNO
M5
M6
M1
M2 M3 M4
START/STOP SYNC INTRO/ENDING FILL-IN A FILL-IN B
STYLE
120 SONGS
001-031 CLASSICAL
032-041 FOLK & COUNTRY
042-071 GOLDEN & POP
072-087 JAZZ & FUSION
088-090 ORIENTAL
091-120 PIANO
160 STYLES
001-010 8 BEAT
011-020 16 BEAT
021-030 POP
031-040 BALLAD
041-050 ROCK
051-060 BALLROOM
061-075 DANCE
076-090 SOUL & FUNK
091-100 JAZZ
101-110 COUNTRY
111-130 LATIN/LATIN DANCE
131-140 WORLD
141-150
151-160
TRADITIONAL
INDONESIA
5 DEMOS
001 FUNK
002
003
004 I CAN......
005
AMERICAN PATROL
GUITAR & SAXPHONE
ALISE
310 VOICES
001-008 PIANO
009-016 MALLET
017-024 ORGAN
025-032 GUITAR
033-040 BASS
041-048 STRINGS
049-056 STRING ENSEMBLE
057-064 BRASS
065-072 REED
073-080 PIPE
081-088 LEAD
089-096 PAD
097-104 EFFECTS
105-112 ETHNIC
113-120 PERCUSSIVE
121-128 SOUND EFFECTS
129-300 OTHER VOICES
301-310 DRUM SET
TUTOR
SYSTEM
A.B.C.
RECORD
RECORD PLAY/STOP
TOUCH
SUSTAIN
A.B.C.
LOWER
DUAL
FADE
CHORD DICTIONARY
LESSON LEFT RIGHT
BEAT FOLLOWPERFORM LEFT RIGHT
CHORD
DICTIONARY
2
15 6
3
4
7
8
9
11
12 13 14 15 16
17
18
19
22 23
20
21
24
31
32
26 27 28 29 30
25
10
General Guide
1
2
3
4
5
678910 11
12
13
14
15 16
17 18 19
20 21 22
RECORD
TOUCH
SUSTAIN
A.B.C.
LOWER
DUAL
FADE
CHORD DICTIONARY
BEAT FOLLOWPERFORM LEFT RIGHT
2. Rear Panel Jack
USB
SUSTAIN PEDAL
VOLUME PEDAL
3. LCD Display
SUSTAIN
CHORD DICTIONARY
BASS CLEF
TREBLE CLEF
BEAT
FOLLOW
PERFORM
RIGHT
RECORD
13
14
15
16
17
18
19
LEFT
20
21
22
AUX OUT
PHONES
DC 12V
POWER ON/OFF
MASTER VOLUME
MIXER
-RHYTHM
-BASS
-ACCOMP
-LOWER
-UPPER
TEMPO
FADE
A.B.C.
FUNCTION
DEMO
O.T.S.
ACCOMPANIMENT CONTROL
-START/STOP
-SYNC
-INTRO/ENDING
-FILL-IN A
-FILL-I B
PANEL MEMORY
-M1-M6
LESSON
LEFT
RIGHT/CHORD DICTIONARY
RECORD
PLAY/STOP
VOICE
STYLE
SONG
METRONOME
PIANO
STORE
MEMORY BANK
TRANSPOSE
OC TAVE
DUAL
LOWER
TOUCH
SUSTAIN
DSP
NUMERIC KEYPAD
LCD DISPLAY
1. Front Panel
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1717
18
19
20
21
22
23
24
25
30
26
31
28
27
32
29
A.B.C
LOWER
DUAL
FADE
VOICE/STYLE/
SONG/ALBUM
CHORD
TEMPO
MEASURE
BEAT
MEMORY
DSP
TOUCH
1
2
3
4
5
6
7
8
9
10
11
12
4

Power Supply
This electronic keyboard can be powered by current
from a standard household wall outlet (using the
specified AC adaptor) or by batteries.
Using The AC Adaptor
Make sure that only the AC adaptor specified for
this electronic keyboard is used. The adaptor shall
be 12V DC output, and center positive type. Be sure
to turn off the electronic keyboard before you
connect the adaptor into the AC wall outlet and the
cord into the unit.
Use only the specified AC adaptor. Using other types
of adaptor creates the risk of fire and electrical shock.
For safety sake, be sure to unplug the AC adaptor
from the wall outlet whenever leaving the electronic
keyboard unattended for a long time.
Using Batteries
Always make sure to turn the keyboard off before
inserting new batteries or replacing old ones.
To insert the batteries
Open the battery compartment on the bottom of the
keyboard.
Insert 6 D size (SUM-1, R-20) batteries into the
battery compartment and follow the correct polarity.
Replace the compartment cover and make sure it
locks firmly in place.
1.
2.
3.
Low battery indications
Any of the following symptoms indicate low battery
power. Replace the batteries as soon as possible
whenever any of the following occurs.
A dim and difficult-to-read LCD display.
Abnormally low speaker/headphone volume.
Distortion of the sound output.
Sudden power failure when playing at high volume.
Abnormal playing of the rhythms or demo songs.
Dimming of the display when playing at high volume.
When inserting batteries, make sure to follow the
polarity marking.
Never use batteries of different types.
Never mix old batteries with new ones.
Replace the batteries as soon as possible after any
sign of discharge.
Always remove the batteries from the battery
compartment when the keyboard is not expected to
be used for a long period of time.
CAUTIONS!
CAUTIONS!
5

The Headphone Jack
The Aux. Out Jack
The AUX. OUT jack delivers the output of the
keyboard for connection to an external amplifier.
Using an audio cord to plug into AUX. OUT jack
located on the rear panel; then plug the other end
of the cord into LINE IN or AUX. IN of the amplifier.
Connections
If you prefer to play with headphone for high quality
personal monitoring, plug a stereo headphone set
into the rear panel PHONES jack.
Plugging a set of headphones into the PHONES
jack will shut off the speakers automatically.
The USB Jack
WARNING:
!
To avoid damages, turn the power switches of this
keyboard and all related devices OFF if you want to
plug in or unplug between this instrument with all
related devices.
Stereo
System
The Sustain Pedal
An optional footswitch can be plugged into the
SUSTAIN jack for sustain control. The footswitch
functions like the damper pedal of a piano. Press
for sustain, release for normal sound.
An optional volume control can be plugged into
the VOLUME jack for adjusting the volume of
sound.
The Volume Pedal
6
Connect to PC or other USB host devices that support
USB Audio. Device with USB cable, after the driver is
installed and initialization is finished, you can choose
USB Audio Device in the device menu of the software
to transfer midi data.

VOICE
Voice number
Dual Voice
Voice setting
Selecting & Playing a Voice
Voices & Effects
310 voices (see Appendix).
When the power is on, the default (VOICE R1) is
001, VOICE R1 flag and the voice name appear on
the LCD.
You can select the voice number by pressing the
[+/YES / -/NO] button or with the numeric keypads.
1.
2.
When you change voice function from other functions,
press the [VOICE] button first, the VOICE R1 flag
appears on the screen and the name of the first voice
appears on the LCD.
When the VOICE button is pressed each time, it will
judge whether the dual voice and the voice on the left
section of the keyboard are opened currently, and will
switch amongst the buttons. The sequence will be
VOICE R1--VOICE R2--VOICE L--VOICE R1.
Press [+/YES / -/NO] buttons or the numeric keypads
to select a voice.
This keyboard has dual voice function.
This function is capable to enhance the delicacy of
your music by playing two voices of musical
instruments simultaneously; new combinations of
voices and music could be created then. When the
dual function is off, the voice indicated is VOICE 1,
when the dual function is on, the voice indicated is
VOICE 2.
During the VOICE 1 status, press [DUAL] button to
enter the dual voice function. VOICE R2 and
DUAL signal would be lightened simultaneously.
The name and code of the dual voice will be
displayed on the LCD. Two selected voices will be
overlapped at the same time.
Press [DUAL] button again to turn off the dual voice
function.
""
In DUAL VOICE status, only the right area of
keyboard has the dual voice.
7
NOTE:
NOTE:
5
4
2
1
3
6
8
7
0
9
DUAL
DUAL

8
Voice L Voice R1/R2
Split Point (#F3) Split/Lower Voice
This function will split the keyboard into left (lower)
and right sections.
When the function is on, the left (low) section of the
keyboard will be used to accompany the melodies
played at the right (high) section of the keyboard.
The separation note for the 2 sections is the #F3
note.
Press [LOWER] button to turn on the lower voice;
the LOWER flag appears as well as VOICE L and
the name of the lower voice.
Press [LOWER] button again to turn off the lower
voice. The LOWER flag will be shut off.
""
2.
1.
LOWER LOWER
Sustain
2.
1. Press the [SUSTAIN] button to turn on the sustain
effect. (Sustain flag will appear) It allows the notes
played on the keyboard to have a longer sustain
effect.
Press the [SUSTAIN] button to turn the sustain
effect off.
When setting the pedal as the sustain pedal (see
function), the sustain effect by pedal is stronger than
the effect by pressing [SUSTAIN] button.
NOTE:
SUSTAIN SUSTAIN
Touch Response
The touch function enriches the touch and sensitivity
level of the music that you play.
Levels (0-3) could be adjusted by the parameter of
the TOUCH button.
The higher the level of parameter, the stronger the
touch effect will be expressed.
TOUCH
TOUCH

Modulation
Press and hold [MODULATION] button. You can
hear modulation effect when playing the keyboard.
Release the button to stop the modulation effect.
higher
(+2)cent
lower
(-2)cent
Pitch Bend
The pitch bend wheel can be used to bend the note
lower or higher, range between +/- 2 cent. When
you release the wheel, the note will be back to the
normal status.
Transpose
2.
1.
3.
Transpose switches the pitch of the notes that you
play; for instance, you will be able to switch the key
of a C note to G note by adding up the transpose
level. Press [TRANSPOSE +] / [TRANSPOSE- ] to
adjust the pitch level.
To cancel this function, press both [TRANSPOSE +]
and [TRANSPOSE-] simultaneously until the value
of transpose becomes 0 .
This function is also valid when there is an accom-
paniment of chord / lower voice function is on.
""
TRANSPOSE
Octave
2.
1. Press [OCTAVE +] / [OCTAVE-] buttons to adjust
the octave and the value of octave will appear on
the display. Only one octave up and one octave
down are available.
To cancel this function, press both [OCTAVE +] and
[OCTAVE-] simultaneously until the value of octave
becomes 0 .""
OCTAVE
9

Selecting & Playing a Style
Style Control
Style Number
Style Setting
Start the Style
The keyboard has 160 styles in total, from 001 to
160. The default style is 001. Press [STYLE] button
to enter to the style mode. LCD lights the STYLE
flag and displays the style number.
When the power is on, the style number will be
001 ; the STYLE flag is not showing on the display
yet, press [STYLE] button to enter the style status,
the STYLE flag will show up and the name of the
style will appear on the screen.
You can select the style number by pressing the
[+/YES] / [-/NO] button or with the numeric keypads.
""
2.
1. Start button:
Use [START/STOP] button to start the style.
Sync function:
Press the [SYNC] button, the beat indicators flash
and a "waiting model " has been entered. The style
starts to play immediately after you press the keys.
To stop, simply press the [SYNC] button again; if
you hit the keys again, the style will be playing
again as well.
The function synchronizes the start of an automatic
accompaniment with the 'recognized' notes pressed
without pressing [START/STOP].
10
STYLE
5
4
2
1
3
6
8
7
0
9
START/STOP
START/STOP
SYNC
SYNC
INTRO/ENDING
INTRO/ENDING
FILL-IN A
FILL-IN A
FILL-IN B
FILL-IN B
Flashing simultaneously
The chord area If A.B.C mode is off, play any key on keyboard to start
the style.
If A.B.C mode is on, only play the chord area key to
start the style with the Auto Bass Chord
accompaniment.
NOTE:

INTRO/ENDING
This function is applicable to add in the beginning /
ending of a style. Its length varies in different styles.
When the INTRO/ENDING mode is processing,
the indicator above FILL A or FILL B will be
flashing until the mode finishes.
If you press the [INTRO/ENDING] button before
starting a style, this key will be used as INTRO
function.
Press [START/STOP] or [SYNC] and the style will
begin with a fill in intro. When a style is playing, hit
this key as an ENDING function.
""
""""
START/STOP
START/STOP
START/STOP
START/STOP
SYNC
SYNC
SYNC
SYNC
INTRO/ENDING
INTRO/ENDING
INTRO/ENDING
INTRO/ENDING
FILL-IN A
FILL-IN A
FILL-IN A
FILL-IN A
FILL-IN B
FILL-IN B
FILL-IN B
FILL-IN B
3.
Flashing
FILL IN A/B
A.B.C.
2.
3.
1. While you are playing with accompaniment, you
can add fill in to the rhythm/accompaniment by
pressing the [FILL-IN A] or the [FILL-IN B] button;
this will automatically insert a fill in to a style.
The indicator above [FILL-IN A] / [FILL-IN B] will be
flashing when the fill in function is processing.
When a fill in finishes, the indicator will become still
and will stop flashing.
Press the [A.B.C.] button, (the A.B.C icon will
appear on the screen).
As soon as you play any fingering on the left-hand
section of the keyboard, the system will
automatically recognize the chord and begin to
play the appropriate bass line and the parts of the
chord along with the selected style.
The chord name recognized will be displayed.
""
2.
3.
1.
STYLE
A.B.C.
The chord area
11

Tempo
Fade
Press the [TEMPO+] or [TEMPO-] button, the
tempo can be adjusted up or down within the range
of 30-280.
Hold either [TEMPO+] or [TEMPO-] button allows
you to speed up the selection.
Press [TEMPO+] and [TEMPO-] simultaneously to
set the tempo back to the default value.
1.
2.
3.
1.
2.
TEMPO
FADE After flashing 10 seconds,
the indicator be off
After flashing 10 seconds,
the indicator be lit up
First step
Second step
FADE
FADE
TEMPO
Tempo must be adjusted before the style starts,
otherwise the tempo will remain as its default level
when a style is playing.
NOTE:
12
The FADE function creates a softer sound for playing
style, the volume will be altered as well.
Fade IN:
Before starting a style, the FADE IN function will be
enabled by pressing [FADE] button with the FADE
indicator lits up.
When a style started, the fade indicator will flash and
the volume of style will increase up to the maximum
level within 10 seconds; then the style plays normally
and the FADE indicator will shut off.
Press [FADE] button after FADE OUT function is
enabled, and the volume of style will increase up to the
maximum level within 10 seconds; then the style is
normally playing and FADE indicator off .
Fade OUT:
Press [FADE] button when playing a style; FADE
indicator will flash immediately and the volume of style
will be turned down to a minimum level within 10
seconds; then the FADE indicator shuts off and the style
is within the mute mode until the style stopped or has
entered the mode of FADE IN by pressing [FADE]
button.
START/STOP
First step
Second step
FADE
START/STOP

Function Menu
Master Tune
Press [FUNCTION/BACK] or [FUNCTION/NEXT]
button to enter this function menu; when power is
on, the first item of this function is Master tune ,
press [FUNCTION/BACK] or [FUNCTION/NEXT]
button repeating to select other items, then press
[+/YES] / [-/NO] to adjust parameter, please refer to
the table on the left.
""
If there is no reaction for 3 seconds after pressing the
[FUNCTION] button, it will quit the function menu
automatically.
In TUNE menu, press [+/YES] / [-/NO] button to
adjust tune parameter; parameter range: -50 to +50
cents.
Press both [+/YES] and [-/NO] to reset the default
value of the tune.
NOTE:
FUNCTION
/ BACK
FUNCTION
/ NEXT
Content
Tune
Beat Type
Split Point
MIDI IN Channel
MIDI OUT Channel
Portamento and
Modulation
Portamento Type
DSP Reverb Type
DSP Reverb Level
DSP Chorus Type
DSP Chorus Level
LCD Display
Tune
Beat
Split pt
Midi In
Midi Out
MODU
Port Type
Rvb Type
Rvb Level
Crs Type
Crs Level
Range
-50...50
0 2...9
1...61
01...16, ALL
01...16
MODULATION(MODU)
/PORTAMENTO(PORT)
1-3
1--8
0--7
1--8
0--7
Default Value
0
4
19 (F3#)
ALL
01
MODULATIO
(MODU)
2
Reverb 5
2
Chorus 1
0
5
4
2
1
3
6
8
7
0
9
Beat
There are 9 types of beats. Press [+/YES] / [-/NO]
button to adjust the parameter.
FUNCTION
/ BACK
FUNCTION
/ NEXT
Split Point
In split point menu, press [+/YES] / [-/NO] button to
adjust its parameter. Parameter range: 1 to 61 (Low
C Note to High C).
FUNCTION
/ BACK
FUNCTION
/ NEXT
13

MIDI Channel
Press [FUNCTION/BACK] or [FUNCTION/NEXT]
button to set the MIDI channel function. Press
[+/YES] / [-/NO] button to adjust its parameter; the
MIDI IN/OUT channel is from number 1 to 16.
FUNCTION
/ BACK
FUNCTION
/ BACK
FUNCTION
/ NEXT
FUNCTION
/ NEXT
Portamento and Modulation
Press [FUNCTION/BACK] or [FUNCTION/NEXT]
button to enter the portamento and modulation
function, MODU/PORT will appear on the display,
press [+/YES] / [-/NO] to select portamento or
modulation.
""
FUNCTION
/ BACK
FUNCTION
/ NEXT
Portamento Type
Press [FUNCTION/BACK] or [FUNCTION/NEXT]
button to enter the portamento setting function, the
number of PORT Type will appear on the screen,
press [+/YES] / [-/NO] to select a type, range from
1 to 3 and the default value is 2.
FUNCTION
/ BACK
FUNCTION
/ NEXT
14

DSP Effect
Reverb Type
Press [FUNCTION/BACK] or [FUNCTION/NEXT]
button to enter the reverb type setting function, the
number of Rvb Type will appear on the screen.
Press [+/YES] / [-/NO] to select one of the 8 types
of reverbs. The default value is 5.
Reverb Level
Press [FUNCTION/BACK] or [FUNCTION/NEXT]
button to enter the reverb level setting function; the
number of Rvb Level will appear on the screen.
Press [+/YES] / [-/NO] to select a level, ranges from
0 to 7 and the default value is 2.
Chorus Type
Press [FUNCTION/BACK] or [FUNCTION/NEXT]
button to enter the chorus type setting function; the
number of Crs Type will appear on the screen.
Press [+/YES] / [-/NO] to select one of the 8 types;
the default value is 1.
Chorus Level
Press [FUNCTION/BACK] or [FUNCTION/NEXT]
button to enter the chorus level setting; the number
of Crs Type will appear on the screen.
Press [+/YES] / [-/NO] to select one of the 7 types;
the default value is 0.
1.
1.
2.
2.
3.
4.
FUNCTION
/ BACK
FUNCTION
/ BACK
FUNCTION
/ BACK
FUNCTION
/ BACK
FUNCTION
/ NEXT
FUNCTION
/ NEXT
FUNCTION
/ NEXT
FUNCTION
/ NEXT
Mixer
Through mixed control (works like a small mixer)
you can adjust the keyboard ambidextrously, by
controlling the accompaniment, bass and track
volume of drum etc.
Press [BASS +] / [BASS -] button, you can adjust
the track volume of bass.
Press [RHYTHM +] / [RHYTHM -] button, you can
adjust the track volume of drums.
You can turn off the volume of a channel. For
instance, press [RHYTHM +] and [RHYTHM -]
simultaneously, the volume off the RHYTHM
channel will be turned off. You will see ''oFF
Rhythm" in the LCD.
RHYTHM
RHYTHM
BASS
BASS
LOWER
LOWER
UPPER
UPPER
ACCOMP
ACCOMP
MIXER
MIXER
15

Press [ACCOMP +] / [ACCOMP -] button, you can
adjust the track volume of accompany chord.
Press [LOWER +] / [LOWER -] button, you can
adjust the volume of the left keyboard section.
Press [UPPER +] / [UPPER -] button, you can
adjust the volume of the right keyboard section.
You can adjust the parameter by these keys and
the parameter selection will appear on the screen.
Please refer to the range of the parameter on the
left.
This function measures and imitates the output
signal of a musical instrument played at a realistic
environment.
You can adjust the value of DSP from the
FUNCTION menu, press [DSP] button to turn it on
or off.
Press [METRO] to turn on the metronome, press
[METRO] again to turn it off.
RHYTHM BASS LOWER UPPERACCOMP
MIXER
RHYTHM BASS LOWER UPPERACCOMP
MIXER
RHYTHM BASS LOWER UPPERACCOMP
MIXER
3.
4.
5.
6.
Track On Display Range Default Setting
RHYTHM Volume
BASS Volume
ACCOMP Volume
LOWER Volume
UPPER1 Volume
UPPER2 Volume
RHYTHM
BASS
ACCOMP
LOWER
UPPER
UPPER
0...31
0...31
0...31
0...31
0...31
0...31
23
23
23
12
23
20
DSP (Digital Signal Processing)
Metronome
METRO
The metronome can be turned on at anytime and
within any function.
NOTE:
DSP
16

Piano
Memory
Press [PIANO] button to enter the piano mode. The
character PIANO will appear on the display and
the keyboard voice will be piano.
Press [PIANO] again to exit the piano mode. If you
enter the piano mode, the A.B.C. function will be
turned off.
If you press [DEMO], [SONG] or [MEMORY] button,
it will exit the piano mode.
In this mode, you can play styles without
accompaniment.
In piano mode, you will not be able to enter the
record function.
""
It has 4 banks. Press [MEMORY BANK] sequence
to select bank (1-4).
It can store 6 statuses of memories. (M1-M6)
Press [M1]~[M6], MEMORY (Bank 1-4) and
(Memory 1-6) will appear on the screen.
Press and hold [STORE] button, then press [M1] (or
[M2]-[M6]) and you can store data to M1 (or M2-M6)
memory.
Press and hold any of the 'M' buttons for loading
the data from memory. The number of the memory
will appear on the screen.
Press both [+/YES] and [-/NO] simultaneously and
to turn on the power again, the memories will be
erased and return back to the default setting.
1.
1.
1.
2.
2.
2.
3.
3.
3.
PIANO
Memory Bank
Store/Load Parameter
ONE TOUCH
SETTING
ONE
TOUCH
SETTING
STORE
M5
M6
M1
M2 M3 M4
M5
M6
M1
M2 M3 M4
11
11
MEMORY
BANK
5
4
2
1
3
6
8
7
0
9
17

Memory Date
The memory data can store main voice, dual voice,
left-hand voice, sustain on/off, styles, tempo,
function, mixer, ACCOMP parameter and octave
parameter to any of the 'M' buttons.
One Touch Setting is a powerful and convenient
function that allows you to reconfigure all settings
instantly with the touch of a single button.
Parameters:
TO RECALL A ONE-TOUCH SETTING
Select one of the styles.
Each style has four presets.
Press the [O.T.S.] button, LCD displays ''O.T.S'';
''A.B.C.'' would be turned on automatically.
Press any of the [M1]~[M4] buttons, corresponding
to the preset and LCD displays ''O.T.S 1-4''.
When a style is playing, press [O.T.S.] to turn on
the O.T.S mode, it will insert a ''Fill in'' automatically.
Insert ''FILL A'' when pressing [M1] or [M2] button.
Insert ''FILL B'' when pressing [M3] or [M4] .
O.T.S. Function
When the style is stopped, press [M1] ~ [M4] button.
No¡°FILL IN¡±will be inserted.
Press [O.T.S.] button again to exit the O.T.S. mode,
LCD displays ''MEMORY''.
NOTE:
Voice R1 number and volume
Dual function.
Voice R2 number and volume
Reverb and Chorus type and level
Octave
1.
2.
3.
4.
5.
O.T.S.
ONE
TOUCH
SETTING
M5
M6
M1
M2 M3 M4
18

Record
Record Stop
2.
1. Stop Automatically:
If the capacity is full, recording will be stopped
automatically even recording is in process; the
screen will indicate ''FULL ''. When a style is
playing, press [INTRO/ENDING] button, after
''ending, '' recording will stop automatically.
Stop Manually:
Press [RECORD] button again to stop recording
immediately.
RECORD
RECORD PLAY/STOP LESSON LEFT RIGHT
BEAT FOLLOWPERFORM LEFT RIGHT
CHORD
DICTIONARY
Record Start
After completion of all settings in the record waiting
status, play the keyboard (the chord area when
recording ACCOMP) or press [START/STOP]
button. It will start recording and the beat will follow
the current tempo.
Once the recording of one track is started, the original
data in the track will be overwritten.
If there is data stored in the ACCOMP track, then the
playback tempo will follow the tempo of the ACCOMP
track.
If there is no data stored in the ACCOMP track, the
MELODY tempo will then be one of the MELODY
tracks' tempo when record is playing.
NOTE:
START/STOP SYNC INTRO/ENDING FILL-IN A FILL-IN B
Record Waiting
Press [RECORD] button. Four counting beats on
the LCD will flash simultaneously. It indicates
''record waiting status''. Voice, style, memory and
recording tracks can be selected from this status.
The ACCOMP and MELODY tracks can be
recorded together but also separately. But notice
that 2 MELODY tracks cannot be recorded at the
same time.
2.
1.
RECORD
RECORD PLAY/STOP LESSON LEFT RIGHT
BEAT FOLLOWPERFORM LEFT RIGHT
CHORD
DICTIONARY
Flashing
Record Playback
RECORD
RECORD PLAY/STOP LESSON LEFT RIGHT
BEAT FOLLOWPERFORM LEFT RIGHT
CHORD
DICTIONARY
After selecting the track, press [PLAY/STOP] button
to start playing the track data. Press [PLAY/STOP]
again to stop playing.
If the recording memory is empty, the character ''EMPTY''
will appear temporary on the display, when you press
[PLAY/STOP].
NOTE:
19