myappliances ART29402 User manual

Before use, please read and follow all the safety rules and operating
Instructions.
USER MANUAL
BUILT IN FREEZER
ART29402

European Safety Certificate
Compliance Declaration
The manufacturer assumes full responsibility for the compliance
of products manufactured with relevant safety, health and
environmental protection requirements set out in European
Directives. Test reports are available for verification upon
request. The manufacturer will present the quality certificate or
manufacture license to a refrigerator dealer if so required.
Furthermore, the manufacturer declares that all parts intended
to be in contact with fresh food as described in this User’s
Manual are free of toxic substances.
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it shall be handed over to the applicable
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential nagetive
consequences for the environment and
human health, which could otherwise be
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
contact your local city office, your
household waste disposal service or the
shop where you purchased the product.

Content Page
1. Environmental Protection and Proper Disposal.........2
2. Location.....................................................................2
3. Installation ....................................... ......................2-3
4. Rating Plate........................................................... ...3
5. Electric Connection ...................................................3
6. Operation Instructions... .........................................3-4
7. Freezer Compartment ...............................................4
8. Ice & Ice Cream Making ...........................................5
9. Preparing for Vacation .............................................5
10.Cleaning & Maintenance .........................................5
11.Defrosting .................................................... ..........5-6
12.Problem Diagnosis ..................................................6
13.Troubleshooting ................................ .....................6-7
14.During a Power Interruption.....................................7
15.Making A Service Call .............................................7
16.Installation In Kitchen ..............................................7
17.Warranty..................................................................7
18.Illustration of Parts...................................................7
Please read these instructions carefully before use.
Underline the important instructions. Keep the User’s
Manual in a safe place for later reference. Remember to
hand it over to the owner, if you ever sell the appliance.
What you have bought is a safe and reliable refrigerator.
With appropriate use and maintenance, it will be in service
for years. The last page of this User’s Manual sets out
specifications of this appliance and the performance data
indicated in the rating plate are test results obtained at an
ambient temperature range of 16~32°C.
Important!
It is intended strictly for household use. If using it for
industrial or commercial purpose, be sure to observe the
relevant norms and regulations.
A leakage test has been conducted in accordance with
relevant safety standard.
To avoid the risk of child entrapment, please make sure
your old refrigerator is inoperative and safe by removing
the latches and bolt locks before disposal.
Important!
It must be noticed that refrigeration system contains
refrigerants, which require specialized waste disposal.
Contact your local waste disposal center for proper
disposal of an old appliance and contact your local
authority or your dealer if you have any question. Please
ensure that the pipe work of your refrigerator does not get
damaged prior to being picked up by the relevant waste
disposal center, and contribute to environmental
awareness by insisting on an appropriate, anti-pollution
method of disposal. Please see the rating plate for the
type of refrigerant and insulation used.
The plug should be accessible after the appliance is
positioned.
If the power cord is damaged, it must be replaced with a
new power cord from the manufacturer or an authorized
service agent.
Caution:
The appliance should be installed in a well ventilated place.
The shipment package should be removed.
Caution:
Do not use a sharp or pointed item to defrost.
Caution:
Make sure the refrigeration system is not damaged.
Caution:
Do not use electrical appliances inside the food storage
compartments of the appliance, other than models
recommended by the manufacturer.
This User’s Manual is applicable to a variety of models
and there may be slight changes in certain aspects from
model to model.
1

1.Environmental Protection and
Proper Disposal
Package materials
The appliance is packaged in a way to prevent damages
during transportation. Recyclable materials are used.
The packing box is made of corrugated board / cardboard
(mainly from recycled paper).
·Polystyrene parts (CFC-free foamed polystyrene)
·Linings and polyethylene bags
·Polypropylene straps
All these valuable materials may be taken to a waste
collecting center and used again after adequate recycling.
All waste materials should be disposed properly.
2.Location
Make sure the refrigerator is kept upright during handling.
If an inclination is required, it should not exceed 45
degrees. Otherwise the appliance may get damaged
resulting not only in compromised refrigeration
performance.
To avoid product damage or personal injury, the
refrigerator should be unpacked by two persons after it is
located in a previously selected position.
Before installation, make sure the refrigerator has no
visible exterior damage.
When handling the refrigerator, do not lift it by holding the
worktop, to prevent any damage to the refrigerator.
Do not start up a refrigerator that is damaged.
Check the refrigerator carefully for:
·Damaged package due to inappropriate handling
during transportation
Damageintheexterior
·Damage in power cord / plug
Any doubt, please contact Customer Service for a
thorough checkup of the appliance.
Take necessary measures to prevent leakage of
refrigerant at the start-up of refrigerator that may result in
environmental pollution.
3.Installation
a) Remove all package materials.
b) Remove items in the refrigerator.
c) Make sure to remove film and tape on the cabinet and
the door.
d) Remove polystyrene chips (if any) around the
refrigerator.
e) Take out accessories and literature in the refrigerator.
f) Clean the inside of the refrigerator with lukewarm
water and vinegar and then dry it with a soft cloth.
g) Use the spanners supplied to adjust the leveling leg to
ensure the refrigerator is stable.
Do not use detergents, sharp or pointed instruments
or soda-based cleansers to clean the refrigerator.
· Before installation, make sure the refrigeration system
is free of any damage.
· The refrigerator should be used for its intended purpose
only.
· The refrigerator should be positioned on the solid and
even floor to ensure refrigerant circulation and
refrigerating performance.
· If possible, position the refrigerator in a cool and dry
well ventilated room.
· Do not expose the refrigerator to direct sunshine and
make sure the ambient temperature is not extremely
high.
· Keep the refrigerator from a heat source, such as
heating system, oven or cookers. Otherwise the
compressor will operate more frequently resulting in
extra power consumption.
If the refrigerator will be placed near a heat source, it is
recommended to install a thermal barrier between the
refrigerator and the heat source (asbestos is prohibited) or
maintain adequate space between the refrigerator and
the heat source as follows:
Do not place any radiating apparatus, such as microwave
oven or roaster, on top of the refrigerator.
Make sure the air vent is not obstructed.
Never unplug the refrigerator by pulling on the power cord.
Always grip the plug firmly and pull it straight out from the
outlet.
2
the heat source as follows:
Cooker or electric stove 3 cm
Radiator or oven 30 cm
Another refrigerator 2 cm

Warning!
After the refrigerator is positioned, allow it to stand still for
at least 2 hours before starting it up to ensure stable
refrigerant circulation and faultless operation.
Beforestartinguptherefrigerator,makesuretheinner
compartment is dry (especially corners).
Danger!
Depending on the chemical composition, the refrigerant
may be flammable. The leak-proofness of refrigerant
circulation system is test proven. Unauthorized
intervention of the refrigerant circulation system may
cause fire.
Make sure the refrigerant circulation system and the
peripheral parts of compressor are not affected.
Any intervention of the refrigerating system should be
conducted only by professional personnel.
Warning!
Refrigerant getting into eyes can cause serious injury. In
this case, rinse the eyes under running water and consult
an ophthalmologist without delay.
The refrigerator should be used within an appropriate
range of room temperature by its climate type.
The range of room temperature for a specific climate type
should be observed. See the rating plate for the climate
type of your appliance.
Climate type Room temperature
SN +10°C~+32°C
N +16°C~+32°C
ST +18°C~+38°C
T +18°C~+43°C
4. Rating Plate
A rating plate is found on the side panel or back panel of
the refrigerator, indicating important technical data.
Write down these technical data.
Write down these technical data.
Write down the technical data for later reference to avoid
the need for moving the refrigerator when such data are
needed.
Model / Type
Storage............................................................... Liter
Working voltage Volt Max
input power (W) Watt
Current ... Amp
Energy consumption .. kWH/24hr
Freezing capacity .. kg/24hr
5.Electric Connection
The refrigerator should use a properly grounded outlet
which should be checked by a qualified electrician. The
refrigerator should always be plugged into its own
individual electrical outlet which has a voltage rating and a
fuse rating in conformity with the rating plate.
In case of nonconformity, consult the local service center
or the dealer immediately.
The refrigerator should not be connected with a converter
(such as solar cell)
Do not use an extension cord.
6.Operation instructions
a)Power on the refrigerator (or power off), and select
temperature settings
· Temperature regulator (thermostat)
· Temperature regulator is used to power on/off the
refrigerator, and select temperature settings.
b).Startup
Turn the temperature regulator clockwise to startup the
refrigerator. (Turn to restricted position at most, or you
may break the temperature regulator).
Compressor starts operation, till interior temperature
satisfies the settings.
c). Setting temperature
In order to adjust the setting of temperature regulator of
freezer compartment, use the key supplied by the
manufacturer and turn the temperature regulator clockwise
or anticlockwise to a desired setting.
3