MyKronoz ZeBracelet User manual

1

2

3
English _____________
Français ____________
Español ____________
Italiano _____________
Deutsch ___________
Nederlands ________
Page 4
Page 22
Page 40
Page 58
Page 76
Page 94

4
USER GUIDE
English

5
Characteristics of the ZeBracelet
ZeBracelet specications
Charging the ZeBracelet
Operating the bracelet for the rst
time - Synchronisation with your
phone
Answering and/or rejecting a call
Setting the time
Your phone’s audio alerts (SMS, alarm
etc.)
Music on your phone
The MyKronoz «anti-theft» function
How to wear ZeBracelet
6
8
10
12
14
16
18
18
19
20

6
GREEN button
1. Characteristics of the ZeBracelet
Connection
signal
Battery
indicator
RED button
OLED
screen

7
Function of the GREEN button
Answering a call Increasing the volume
Function of the RED button
Switching the bracelet on and off
Hanging up after a call
Reducing the volume
Already paired
Time display
Pairing
Call & number
Battery
00:00
PAIRING

8
2. ZeBracelet specications
ZeBracelet
• Bluetooth® version: V2.1
• Voltage: 3.6 V – 4.2 V
• Current: 45 mA - Frequency = 2.4 GHz
• Charging time = 2 to 3 hours
• Standby time = 72 hours (3 days)
• Battery type: Li-ion 150 mAh
• Size: 38.5 x 80 x 12.5 mm - Weight: 45 g
• Screen: 128 x 32 OLED
• Operating temperature: -20°C to +60°C
• Guarantee: 24 months
ZeBracelet charger
• Supply voltage: 110 V to 240 V
• Frequency: 50 Hz
• Input: 0.15 A
• Output voltage: 5.7 V - Output: 600 mA

9
Warning about operation
This MyKronoz product is designed for receiving calls.
We recommend using it for short phone calls to pre-
serve battery charge, as its size and weight are opti-
mised for daily use of the bracelet.
If Bluetooth® fails to work when synchronising, try re-
setting the product and/or recharging it before trying
again.
It is important to remember that the maximum distance
for Bluetooth® communication between your bracelet
and your phone is ten metres (depending on your envi-
ronment, with better results in open spaces).

10
The product can be charged with the AC power supply
(110 V – 240 V) or directly via USB (5 V).
The power supply houses the USB port, and once the
bracelet is connected to its clip it indicates the battery
charge level.
TheoriginalcableisspecicallydesignedfortheZe-
Bracelet and must be positioned correctly as shown on
the diagram below:
3. Charging the ZeBracelet

11

12
WhenusingtheZeBraceletforthersttime,itneeds
to be synchronised with your phone for Bluetooth®
communication.
4. Operating the bracelet for the rst time
Synchronisation with your phone
Bluetooth
Searching device
PAIRING Bluetooth
BRACELET
Bluetooth
BRACELET
ZTE-CN760
0000

13
Steps to take :
• Press the red button for ve seconds until the
word «PAIRING» appears on the screen
• Activate Bluetooth® on your phone
• Look for «MyKronoz» on your phone and select it
• Enter the code «0000»
• ConrmbytappingOK
• The screen on your MyKronoz displays the name
of your phone and vibrates once to indicate that
thephoneandtheZeBraceletaresynchronised
Thissynchronisationisonlynecessarythersttimeyou
usethebracelet.Aftertherstuse,thephonewillauto-
matically recognise your MyKronoz product.

14
When an incoming call is received, press the GREEN
button twice to answer the call.
With a call already in progress on your phone, press the
GREEN button twice to transfer it to the ZeBracelet.
Press the GREEN button once to increase the volume
or the RED button to reduce it.
Press and hold the RED button for two seconds to hang
up.
To reject a call, press the RED button twice.
5. Answering and/or rejecting a call

15
Bluetooth
Searching device
PAIRING Bluetooth
BRACELET
Bluetooth
BRACELET
ZTE-CN760
0000

16
Switch on the ZeBracelet, then press and hold the
GREEN button for three seconds. The screen will start
to ash.
PresstheREDbuttontochangethehour.Toconrm
the hour and set the minutes, press the GREEN button.
Finally, press the RED button to change the minutes
and conrm by pressing the GREEN button.
Make sure you keep the bracelet charged to avoid the
time being reset.
6. Setting the time

17
GREEN Button
RED Button
00:00

18
Once your phone and your MyKronoz bracelet are syn-
chronised, your phone’s audio alerts will be transferred
directly to the bracelet.
7. Your phone’s audio alerts (SMS, alarm
etc.)
Once the Bluetooth® synchronisation has been carried
out, you can listen to music using the loudspeaker built
into your MyKronoz bracelet.
Use the GREEN button to increase the volume and
RED to reduce it.
8. Music on your phone

19
The operating distance via Bluetooth® between the
MyKronoz product and your phone is about 10 metres.
IftheZeBraceletlosestheconnectionwithyourphone,
a vibration alarm will be triggered to warn you. Press
any button on your bracelet to stop the alarm.
9. The MyKronoz «anti-theft» function

20
There are two methods for placing the ZeBracelet
around your wrist.
1/ If you can slide your wrist inside the bracelet, it can
be positioned easily.
10. How to wear the ZeBracelet