National Instruments NI 9901 User manual

USER MANUAL
NI 9901
Desktop Mounting Kit
Use the NI 9901 desktop mounting kit to mount a CompactRIO or CompactDAQ chassis on a
desktop.
What You Need to Get Started
You will need the following tools to install the NI 9901.
• #1 Phillips screwdriver
• #2 Phillips screwdriver
• T-10 Torx screwdriver (for use with cRIO-905x controllers)
Kit Contents
Verify that the following items are included in the NI 9901 kit.
3
145
2
1. NI 9901 end bracket (x2)
2. NI 9901 adapter bracket (x2)
3. M3 x 14 screw (x2)
4. M3 x 20 screw (x2)
5. M3 x 35 screw (x2)
Note The kit contains two sizes of adapter brackets. Determine which adapter
bracket length is appropriate for your chassis before installation.

Installing the NI 9901 on a Chassis
Installing the Adapter Bracket
If you are installing the NI 9901 on a chassis that does not provide mounting holes at both
ends of the chassis, you must install the adapter bracket on the back of the chassis.
What to Use
• Adapter bracket appropriate for your chassis
• M3 screws appropriate for your chassis
• Screwdriver, #1 Phillips or T-10 Torx, depending on your chassis, user-provided
What to Do
Follow these steps to mount the adapter bracket on the chassis.
Note You must use the screws provided with the NI desktop mounting kit because
they are the correct depth and thread for the panel mounting plate. Refer to the
chassis documentation to determine the correct screw size.
2| ni.com | NI 9901 User Manual

Figure 1. Installing the Adapter Bracket
12
3
1. R Series expansion chassis
2. cDAQ and cRIO chassis
3. cRIO-905x chassis
1. Use the #1 Phillips or the T-10 Torx screwdriver to remove the two screws from the back
of the chassis on the controller side.
2. Use the #1 Phillips screwdriver and the two M3 screws to attach the adapter bracket to
the chassis.
Note Tighten the screws to a maximum torque of 0.55 N · m (4.9 lb · in.).
Installing the Mounting Bracket
What to Use
• Mounting bracket
• Screwdriver, #2 Phillips, user-provided
NI 9901 User Manual | © National Instruments | 3

What to Do
Follow these steps to attach the mounting bracket on the chassis.
Figure 2. Installing the Mounting Bracket
1. Align the mounting brackets with the mounting holes at the end of the chassis or on the
adapter bracket.
2. Use the #2 Phillips screwdriver to tighten the captive screw on the end bracket.
Environmental Management
NI is committed to designing and manufacturing products in an environmentally responsible
manner. NI recognizes that eliminating certain hazardous substances from our products is
beneficial to the environment and to NI customers.
4| ni.com | NI 9901 User Manual

For additional environmental information, refer to the Minimize Our Environmental Impact
web page at ni.com/environment. This page contains the environmental regulations and
directives with which NI complies, as well as other environmental information not included in
this document.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers At the end of the product life cycle, all NI products must be
disposed of according to local laws and regulations. For more information about
how to recycle NI products in your region, visit ni.com/environment/weee.
电子信息产品污染控制管理办法（中国 RoHS）
中国客户 National Instruments 符合中国电子信息产品中限制使用某些有害物
质指令(RoHS)。关于 National Instruments 中国 RoHS 合规性信息，请登录
ni.com/environment/rohs_china。(For information about China RoHS
compliance, go to ni.com/environment/rohs_china.)
Worldwide Support and Services
The NI website is your complete resource for technical support. At ni.com/support, you have
access to everything from troubleshooting and application development self-help resources to
email and phone assistance from NI Application Engineers.
Visit ni.com/services for information about the services NI offers.
Visit ni.com/register to register your NI product. Product registration facilitates technical
support and ensures that you receive important information updates from NI.
NI corporate headquarters is located at 11500 North Mopac Expressway, Austin, Texas,
78759-3504. NI also has offices located around the world. For support in the United States,
create your service request at ni.com/support or dial 1 866 ASK MYNI (275 6964). For
support outside the United States, visit the Worldwide Offices section of ni.com/niglobal to
access the branch office websites, which provide up-to-date contact information.
NI 9901 User Manual | © National Instruments | 5

Information is subject to change without notice. Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for
information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their
respective companies. For patents covering NI products/technology, refer to the appropriate location: Help»Patents in your
software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents. You can find
information about end-user license agreements (EULAs) and third-party legal notices in the readme file for your NI product. Refer
to the Export Compliance Information at ni.com/legal/export-compliance for the NI global trade compliance policy and how
to obtain relevant HTS codes, ECCNs, and other import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES AS
TO THE ACCURACY OF THE INFORMATION CONTAINED HEREIN AND SHALL NOT BE LIABLE FOR ANY ERRORS. U.S.
Government Customers: The data contained in this manual was developed at private expense and is subject to the applicable
limited rights and restricted data rights as set forth in FAR 52.227-14, DFAR 252.227-7014, and DFAR 252.227-7015.
© 2005—2018 National Instruments. All rights reserved.
374057G-01 October 18, 2018