Nexo IDT-QRA-V2 Operational manual

www.nexo-sa.com
ZA du pre de la Dame Jeanne
60128 PLAILLY-France
- Read this document before using.
- Keep this document.
- Observe all warnings and cautions.
PAGE 1 OF 4
IDT-QRA-V2
DP2356/Rev01a - DI
Quick Release Clamp
Contents:
Safety: Use the sling and the quick link to
secure with the free hole.
X1
X1
X1
Weight: 0.4 kg / 0.88 lb

www.nexo-sa.com
ZA du pre de la Dame Jeanne
60128 PLAILLY-France
- Read this document before using.
- Keep this document.
- Observe all warnings and cautions.
PAGE 2 OF 4
Dimensions:
3,0
75
4,3
110
3,6
92
0,4
10
Implementation:
QRA can be moved in 2 different positions on 5 locations.
You can find 5 locations, 2 to use horizontally and 3
vertically.
Insert QRA and push until the locking device locks
automatically.
Pull up the locking device and push QRA to remove it.

www.nexo-sa.com
ZA du pre de la Dame Jeanne
60128 PLAILLY-France
- Read this document before using.
- Keep this document.
- Observe all warnings and cautions.
PAGE 3 OF 4
Use:
Use the levers to lock QRA on ID24
Tilt: Loosen the wing nut to adjust the angle (-45° to +45°).

www.nexo-sa.com
ZA du pre de la Dame Jeanne
60128 PLAILLY-France
- Read this document before using.
- Keep this document.
- Observe all warnings and cautions.
PAGE 4 OF 4
Warning :
Negative tilt: locking device towards the front of the cabinet.
Positive tilt: locking device towards the back of the cabinet.
NEXO cannot accept responsibility for accidents caused by any factor other than defects in this product itself.
Please check the web site www.nexo-sa.com for the latest update.