Nexxia CDR500 User manual

How Do I …… install iO_Connect into CDR500 Radio.
The following guide shows step by step guide to installing an iO_Connect into a 2005 Zafira with CDR500
radio.
se small Allen key to remove grub screws PC5-83 extractor keys to remove radio
Ensure you know the radio code, pull the radio out. Remove side panel to left of centre console.
Top screws along glove box in 3 places. Remove lower panel, then screws in 3 places.

How Do I …… install iO_Connect into CDR500 Radio.
The following guide shows step by step guide to installing an iO_Connect into a 2005 Zafira with CDR500
radio.
nplug glove box light. Glove box can then be removed.
You can now see radio connector clipped into cage. Push on the right hand side to release clips.
Remove connector from back of radio cage. Out the connector comes.

How Do I …… install iO_Connect into CDR500 Radio.
The following guide shows step by step guide to installing an iO_Connect into a 2005 Zafira with CDR500
radio.
This is the main radio connector CDR500 only. se SOT-053, has main connections and standard
ISO connections as well for iO_Connect.
Install the SOT-053 connector into Radio cage. Check from the front it is fully installed.
Then Plug original car connector into SOT-053. Ensure it is fully clipped shut.

How Do I …… install iO_Connect into CDR500 Radio.
The following guide shows step by step guide to installing an iO_Connect into a 2005 Zafira with CDR500
radio.
ISO connectors can then be connected to
iO_Connect loom. Plug in each one and ….
….ensure they are clipped shut. Install two connector into iO_Connect box, large..
.. and small one. Select appropriate audio cable supplied and
connect two phono connectors.

How Do I …… install iO_Connect into CDR500 Radio.
The following guide shows step by step guide to installing an iO_Connect into a 2005 Zafira with CDR500
radio.
Plug in 3.5mm jack into MP3 or phone Plug into jack socket, set switch and test.
Drill holes into Glove box, see “Notes” Install Switch and Socket into Glovebox.
Fininshed result shows Socket and Switch. Install Glove box, plug in cable and test.

How Do I …… install iO_Connect into CDR500 Radio.
The following guide shows step by step guide to installing an iO_Connect into a 2005 Zafira with CDR500
radio.
Notes
Ensure you know the radio code for your radio when re-installing the unit.
The procedure for entering the code in detailed in the Vauxhall Owners manual.
When removing the radio, pull apart the keys to ensure they lock in whilst pulling towards you.
Check the vehicle has the CDR500 radio, if fitted with CD30, CD70 you will require SOT-122, if
fitted with CCR2002, CCR 2005, or CCR 2006 you will need SOT-078.
When fully installed, check the connections behind the supplied switch are not fouling on the
glovebox as this will impair the operation of the iO_Connect.
The information contained in this document is provided for guidance only, we do not accept any
responsibility for loss or damage as a result of attempting to install the product.