Nictemaw XQB50-2010 User manual

Consult a qualified electrician or service agent if the grounding
instructions are not completely understood, or if doubt exists as to
whether the appliance is properly grounded.
If the power supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similar qualified person in order to
avoid hazard.
Children should be supervised to ensure that they do not play with the
appliance.
Each machine is tested for water intake and drainage during
production. Therefore, there may be water residues or traces
of water inside the washing tub, which is a normal
phenom
MADE  HINA
MEM
id'.0
,
11NO:We.„t
glaima
XQB5
10
Warning:
This appliance is not intended for use by persons (including children)
whose physical, sensory or mental capabilities may be different or
reduced, or who lack experience or knowledge, unless such persons
receive supervision or training to operate the appliance by a person
responsible for their safety.
AUTOMATIC
WASHING MACHINE

Parts and Born

Read Before Use
Catalog
Read Before Use
Install guide
Parts and Born

1
Notice 
2
Installation

4
Further Adjustments

6
Usage guide
Pre-wash

8
Programming and features
Wash and Spin

Post-wash

Troubleshooting

12
.
10
11
Frame
Top cover
Inner case
Power cord
Impeller
Operation board
Body
Adjust nut
Filter
Back cover
Water input valve
Drain pipe
Flixed nut
Symbol Notice:
Accessory
this Mark must
JdUOJI
lanlighta
1111111111,111111111
All behavior witi
prohibited. or it ma
endngerusers lif
ftgg:
........
Rat guard 'I PC1,'
11111,111111111.11*
Ceti. etto CZ COI CM*
41111thigualilifoll

power plug of the machine
electrical 110V socket
t attach to adapters.
Groaning
When the machine is in normal use, please
keep the machine plugged in. During a power
outages or if the machine is not being
intended for use, it should be unplugged and
the water tap turned off. Please don't unplug
or plug the machine with wet hands.
obstrt(Whe power cord, damaged the power cord, put any items
At!wppi.y.forigpro
or
bond the cord to improper angles.
rd
0 power plug is damaged, it must be repaired by
Tampering with the cable will void all guarantees.
•
411111111111111111111i
(O
a
ri
ai
ll'i place
p place, and
d° n
 clothes
the mach
i
ne
in the bathroom
no
r i
oo t m or
not put the wet 
other
d
peratIch. board.
This may tat water

the PCB
es on th
° 
e
board which
may
cau;eah , electrical fire. ep
Please ensure that the

at the bottom of the
machine arg,!ypti4vortMated. Take care especially
when placing
machine
on the carpet.
an
Don't wash raincoats or waterproof clothing, such
as a bicycle covers etc. This will cause such items
to be damaged.
Don't share a socket with oilier appliandd
If the power plug is damaged or the sock
. do
not use and have it repaired by a profess
Do not use water at a temperature of more
than 122°F.
Notice

Read Before Use
Notice

Read Before Use
„
41 . 10,40,
When washing machine is on working,
don't put hands into the inner case. And
don't let child climb upon the washing
machine,
Do riot dismantle, repair and rebuild the
machine on your own!
hot or heavy objeets (such
'ater on the washing
Do

Leave Children without supervision
Certain disabilities, illnesses, persons on
medication that can cause dizziness or
hallucinations as a side effect, or the
intoxicated may not use this,
Don't wash clothes that with volatile
su 
_ bsta iii. 'a (thinner, gasc)line, etc.).
Do not put under direct sunlight; do not put
the
appft:',Irice,
close to
a
heating heat sourc6;'
,
• Before washing or spinning laundry, pleas
'\ \
e'-.„
check that all foreign matters are out of the
pockets or not wrapped in blankets (such
. ,, : 114"" , """
as coins, keys, headphones batteries
sand, hairpins etc).
,
'
•
Before Laundry, Please check whether the
tap open or not and water pipe connect or
•
not,
Suggest u e low foam detergent.
ti installed correctly,
-3-
-2

-4-
1111111S
d Before Use
'
1 4 '
Read Before Use
Installation
Please install and adjust the washing machine according to the requirement of the
specifications, this is very important for your safety and correctly use the washing
machine.
How to change the drain pipe direction
mar
How to use drain pipe
111111t1
5,vvhen pipe is too long please cut it fro
A or B
WRZ.
ht of drain pipe should be
0 cm, or it may cause: drain
en*, longer drain and stop
working midway.
2.Don't trample or pressure pipes.
4ff you need letthnthepipe, pleaS?
purchase another pipe( xivlik.';11 length is
not exceed 1.5m) and make salinig on
connected part of two pipes,.
can cut the drain pipe from the
middjepart if the pipe is too long and
bevet ut the front side of the pipe can
help drain fluently,
,
-5-
Install the rat guard
adjustable nut
tighten loosen
11111111
11111111
1111I
P
high
low
adjustable feet
Adjust the Installation position
Please leave ,more than 20 mm between washing machine and the wall, maximum
slope Angle is 2 ° on bearing surface. Ground tilt or uneven may cause washing
machine running unstable or stop in midway, please use the following method to
adjust:
• Determine horizontal
Use a bubble level tool or a free bubble level mobile
phone app to confirm whether the washing machine
is horizontal. If you do not have access to either place
a straw or needle on the machine and see if it rolls.
<2°
•
Adjust the adjustable nut
llift up the machine adjustable side, loosen the adjustable nut, rotate it
and make machine horizontal.
2.After stable adjustment, tighten the adjustable nut.
Before installation, remove
the bottom foam and plastic
stent.
bottom foam 
plastic stent

Connect water pipe with the washing machine
4
4

41111511111

Ii
Dismantle the water pipe
1 
;
.turn off the
2.Press on the lock lever and slider then
pull down the pipe. ,„,,
Tips: ,
if use machine more than once a 'vve
it is better to keep the pipe connector on
,
1
-6-
co
be use
complete
ly
Ink
or of
our
nited States
uitable acce
of the prod
water pipe nu
d please
is off or
,g
N ye
Connect pipe connector and water pipe
451
)40.,
Check the connection between water pipe and tap
1,Pull water pipe slightly to check whether it is tight.
2.Turn on the tap to check whether it is leaking,
3.Don't bend the water pipe
4.Please check the connection between
water pipe and tap, to check whether the
installation is tight or not before use.
54
Amisins '4teristsH,
40 111171 1)7 0 „......., ji
5.
1011111111111m
Suitable tap
unsuitable tap
Ado:
S S
-10111
1
Check the tap
Further adjustments

Read Before Use
Further adjustments

Read Before Use
Connect to the machine
Connect way-A
I t
Connect way-B
0 ring
 part X 
part Y
-7-

/
/ ' a. Ensure no item in the 'do ePocket(gti611
-..
6'§oreW,' ..
edih
b.
Turn clothes over to wash, so that chip or line does not adherit6Ifie
-
Surf6de of clothes
during washing.
c.
When do fine cleaning, like Women's underwear, thin
. pylon a
-
':olyester materials, please
put it into washing bag. ';00'm****
, :***
0 4o
,
0.**
,
***
, .
d.
Tight loose belt in clothing and pull on the zipper.
e.
To get rid of the mud and sand on clothing before washing.
f.
clothes that easy to float on, please put it in the bottom, in addition, when floating, please
slicip and press it into the washing liquid.
g.
Please,Reparate thick clothes and thin clothes in washing.
h.
Inappr6Oriate to wash down jacket and not bibulous clothing if needed please select the
low water level and do single washing.
e. It is Forbidden to wash fur blankets and electric blanket.
Spin drying can lead to shrinkage and
deformation ot the wool fabric.
1.
Please don't us the spin function on wool.
2.
Its forbidden to spin dry down jacket and other
light weight but bulky clothing to avoid danger.
Please check the washing label of your clothes
item before you wash.
Notice
It is forbidden to wash fur blankets
and electric blanket.
Preparation before washing
2.Plug into the socketT
i '
ll  :1;7 , the '
..Connect
water pipe 
turn
down the drain pipe and pu
, t , It on the
1P fl( L )
li cL
r or in the bathtub.
Pre-wash

Usage guide
Please pay attention to the
following matters before washing
—8—
•
p,a,

9t i§
00
•
taawbelo
in
, -

about
8009
11r
i
eriet
a jpaomua
'
s
, 
„
• wo ,
rk clothes up, down
sen
t 500g
4
, jeans(a
about
t3
1 0
1 0
%)
g
•
jacket
about 150 g
• Shirt
about 150 g
•
T
-
shirt
about 200 g
„iliderPan
g!
'
,,about„.5m6140"
• socks
-,„1.11111111110116,,,
gill
s ilt I
114
0 Blended fabric coat
40
single bed sheet
about 110 g
The reference weight of washing
Programming and features

Usage guide
*The washing capacity means the maximum
weight of washing or spinning for a wash.
*The thickness of the fabric, size or kinds, will
affect the actual washing capacity.
*Do not select high water level when fabric
weight is below 1,0kg
* Please select the high water level when you
believe it is suitable. It will not clean clothes
better if you use a high water level for a small
amount of clothes so please try and save
water.
-9-

-11-
0 ,
WWWW.M.MWORWW:110:
1
. MMige*W.girp.
Wash and Spin
Usage guide
llYATRatglf . „9.N.
Post-wash
Usage guide
1.Turn off the tap when finish washing
2.please don't store water in the machine, once finish washing
please drain up water directly
3.Must unplug first then do maintenance
4.Hang power cord and drain pipe on the hook
5.Wipe the wet surface and inner case by soft and clean cloth,
open the top cover for a period of time(about 1 hour) then close.
we ng
How to use bleach
.:,OneeMe,weterliat reached iheVititaibileVOCOU
right Ofetattirdt Waehitit(..
,
MeathititlYtheiddetditr
5 slo
8).qMpgorttAktpAgt 1040044.4
. ..""""
.
rohog„„Alw000kot ottotook
ea
sho uld
you 000KWiii0CWippOihiiiig
: {01 : 0.0410
.
9111(
010!0:000046i,iipt tojx:fity!porL
., wam
ites to no longerbe yoMf00.';qHmoo.Otif
ottkilVititig
ni
ensure
0.
you use
•
Bleach''SliNglOOtg0jOa0OntedmAtti
cyi bldodhAothatobtc,:4060
instruction: ,
Powder ty
pe
,
te. 4 ‘10°
' 4 >f •
math
not advisable
ue toIPOtblitiet.:4kiktii
-10-
•
Each month please clean the Impeller filter to ensure the best performance.
•
During clean up, please unplug the power plug from the socket
How to use laundry detergent
Please note:
•
There is a period of time to start spin
dry even if there is no water in the tub.
•
Clothing with colours may easily rub
off and must be washed separately
from other clothes.
•
If the water is below the minimum water
level the impeller will not turn.
(Y)
(----.'FI*1.1:er cleaning
•
Must use filter when washing
•
Please clean up filter timely
1.Take off the filter
See the pic.
2.Clean the filter
3.Hold on the handle of filter and press
on the bottom to put it in.
washing
(
Clean the water inlet filter by brush
every 2 months
Use wet soft cloth to wipe the dirt on the body
1. Don't directly flushing
2.Use neutral detergent to wipe
3. Don't use thinner, oil, alcohol to wipe
•
Once
the water has reached the water level, put the right amount of
detergent into the container; slowly pour the powder into the tub.
Allow at least 30 seconds to ensure
on even dissolve or use the soak
11.0
,
9n
for best
results, : ..
';'!"'"OMIR'jTOMft
s lI P
:'''I'Mg
4 " :
1111116
,
ashings and
select
suitable water level.
'fis with colour
or patterns are easy to rub off
'
please read
the
efere you wash Your clothes, Please ensue
r that you wash
with whites only and colours with other colours, Do not mix (if
want
your whites to rlo
longer
be whites!
However if you
do
we
s
uggest you use red
for a nice
light pink ) 
•
*
U' e
laundif
'detergent
In modãhitiori
We recommend that you do not use 0...
.••,lfigh foaming
detergent, as it
will no doubt make a muse and
 ,:gtrgipp!.y
: :0 1 194
dosages
may
even
enter the control
panel and
,
deetroythe1!'etipliertOe.
Laundry (ietorgont dosage stigbf&refer tO the :'detergent instructions.
Attp

How to fix
ror Reason
31, 
4
*Incoming water has taken over 20 minutes to
reach water level.
*The Inlet Valve is blocked or obstructed.
*The Water supply is cut off or the stopcock is
open.
()Check the reason for low water pressure, open
and close the cover 1 time to restart operation.
()Remove the blockage from the inlet valve,
once done open and close the cover 1 time to
restart operation.
()Turn on the water supply or stopcock, once
done open and close the cover 1 time to
restart operation.
El Water Inlet Fault
*Reposition the drain pipe for a more
smooth water drainage, once done open
and close the cover 1 time to restart
operation.
•
Remove the blockage from the drain
valve, once done open and close the
cover 1 time to restart operation.
E2 — Drainage Fault
*The cover is open during use.
OClose the cover.
•
Reposition the clothes in the tub so they
are balanced and level and close the
cover.
•
Place the washing machine on a level
surface, once done please open and
close the cover.
*Water level sensor fault.
*Water Leakage.
*Harness contact is loose.
*Airway tube is loose.
•
Unplug the machine, wait 10 seconds
and replug the machine. If issue
continues set water level to normal and
restart the machine.
•
Ensure that your child is a safe distance
from the machine and close the cover.
*Machine is Child locked but the cover has been
opened.
If unsolved the problem after use above methods, please contact maintenance dept and processional
maintenance personnel, customer can not assemble or disassemble.
Remarks
*Water drainage has taken over 5 minutes.
*Drain valve blocked, damaged or faulty.
*Drain pipe is damaged.
E3- Top Cover Fault
E4 — Spin Fault
•
Clothes are not level or balanced.
• The machine is standing at an incline.
E5 — Water Level Fault
E6 — Child Protection
SAFETY REQUIREMENTS
Ensure that servicing is done by factory authorized service
personnel, to minimize product damage or safety issues.
GROUNDING INSTRUCTIONS
This appliance must be grounded. Grounding reduces the risk of
electrical shock by providing an escape wire for the electrical
current.
This appliance has a cord that has a grounding wire with a 3
-prong plug. The power cord must be plugged into an outlet that
is properly grounded.
If the outlet is a 2-prong wall outlet, it must be replaced with
properly grounded 3-prong
wa
il
ou
tl
e
t
.
The s

i
erial rating
indicates the voltage and frequency the appliance s d
for.
del*exi,
,
tn

tak,„

t'tk
"
CligriNSINtle*
ass
ricity safety when using!
.W9

,; 1 $
lance, p ease
Troubleshooting
Please pay attention to
safety instructions