Noctua Nf-a12x15 flx User manual

Dear customer,

Congratulations on choosing the Noctua NF-A12x15 FLX.

Our fans are renowned for their impeccable quality and outstanding longevity and

like all Noctua fans, the NF-A12x15 FLX features an MTTF rating of more than

150.000 hours that’s backed up with our 6 years manufacturer’s warranty.

Each Noctua fan is double checked for flawless operation by our quality control team

before it leaves the factory and I’m confident that you will be able to sense some of

the research, attention and care we’ve put into making this product.

Enjoy your NF-A12x15 FLX!

Yours sincerely,

Roland Mossig, Noctua CEO

Scan this code to display

multi-lingual manuals on

your mobile phone.

This document includes some instructions for

installing, running and cleaning your NF-A12x15 FLX.

Should you have any further questions, our support

team ([email protected]) will be glad to assist you

at any time.

Please also have a look at the regularly updated

FAQs on our website: http://www.noctua.at/faqs

This document is also available in other languages at

the following URL: http://www.noctua.at/manuals

Designed in Austria, Noctua’s premium cooling

components are internationally renowned for

their superb quietness, exceptional performance

and thoroughgoing quality.

Having received more than 6000 awards and

recommendations from leading hardware

websites and magazines, Noctua’s fans and

heatsinks are chosen by more than a hundred

thousand satisfied customers around the globe.

sales@noctua.at |www.noctua.at

For installing the NF-A12x15 FLX on a CPU cooler or water cooling radiator, please use the fan mounting mechanism supplied with said product (fan clips,

screws, etc.). Please be careful when installing the fan on water cooling radiators as the supplied screws are usually designed for 25mm thick fans and

may damage the radiator when being used to install slimmer fans.

If you replace an existing 120mm fan with the NF-A12x15 FLX in other devices, it is usually best to use the screws (or other mounting mechanism) used

for the original fan.

When installing the NF-A12x15 FLX as a case fan, you can either use the supplied mounting screws or NA-AV3 silicone anti-vibration mounts.

Installation

Connection

The NF-A12x15 FLX features a standard 3-pin fan connector. Please note that the fan can also be connected to 4-pin motherboard fan headers though. If

you would like to connect the fan directly to your power supply, please use the supplied 3:4-pin adaptor (NA-AC1).

The NF-A12x15 FLX features a short 20cm primary cable in order to help you minimise cable clutter in typical applications. If you need a longer cable,

please add the supplied 30cm extension (NA-EC2).

The NF-A12x15 FLX comes with Low-Noise (NA-RC10) and Ultra-Noise Adaptors (NA-RC12) that allow you to reduce the fan speed from 1850 to 1400rpm

(NA-RC10) and 950rpm (NA-RC12) in order to achieve even quieter operation.

Cleaning and Maintenance

Fans inside computer cases tend to accumulate dust over longer periods of usage. In order to maintain maximum performance, please clean your fans

regularly using a duster, slightly moist tissue or canned air. Please be careful not to use too much force in order to prevent any damage to the fan. Please

don’t use a vacuum cleaner as this may apply excessive force to the fan.

In order to ensure flawless operation over many years of usage, the NF-A12x15 FLX’s premium grade SSO2 bearing is fully sealed to prevent the entering

of fine dust particles. Please note that the fan is not designed to be taken apart by the user. Removing the impeller from the frame will break the sealing

of the bearing and results in a loss of warranty.

Warranty and Support

Even with high-grade products and strict quality control, the possibility of defects cannot be eliminated entirely. Therefore, we aim at providing the highest