NSE P2 Series User manual
Shenzhen NSE Electronics Co.,Ltd
www.nseled.com
1
Instructions
Thank you for placing you trust in us. Please read the product
instructions carefully before use. While we strive for the upmost
precision for this manual, please be noted that the content of this
manual book is subject to modification without prior notice. Contact us if
you have any question or suggestion to which we would attach the
greatest importance.
Shenzhen NSE Electronics Co.,Ltd
www.nseled.com
2
Precautions
Please read the following carefully to ensure proper use. Irreparable
damage could be resulted if the safety guidelines are ignored.
1) Avoid strong shock or vibrations to the LED display during transportation and
storage.
2) Prevent the LED display from being scratched or damaged during installation.
3) Do not face the LED display to the air conditioner vent.
4) Do not place or use the LED display in an ambient environment with volatile,
corrosive gases or chemicals.
5) Ensure tight connection between the LED display power plug and socket and
proper grounding.
6) For any early detection of smoke, please immediately cut off the power, and
contact qualified professionals.
Shenzhen NSE Electronics Co.,Ltd
www.nseled.com
3
Contents
1.1 Product Specifications
1.2 Product Appearance
1.3 Illustrations for Port Connection
1.3.1 Network Cable Connection to PC
1.3.2 Synchronization of the LED poster and PC by HDMI Cable Connection
1.3.3 USB Flash Drive Connection
1.3.4 Power Interface and Power Indicator
1.3.5 Illustrations for the Cable Connection of One Poster and of Multiple Posters
2.1 Floor-standing Installation
2.1.1 Steps for Bracket and Cabinet Installation
2.2 Hanging (Optional)
2.3 Vertical Wall Mount (Optional)
2.4 Horizontal Wall Mount (Optional)
3.1 Function of Ports
3.2 Display Mode
3.2.1 Single Unit
3.2.2 Extended Multi-unit Splicing
Shenzhen NSE Electronics Co.,Ltd
www.nseled.com
4
4.1 Settings for Single Unit Display
4.2 Settings for Extended Multi-unit Splicing Display
5.1 Program Editing
5.2 Content Publishing
5.2.1 Publishing programs by connecting to the WiFi hotspot of LED Poster
5.2.2 Publishing Program by Network Cable Connection Between LED Poster and PC
5.2.3 Publishing Program via USB Flash Drive
6.1 Maintenance
Shenzhen NSE Electronics Co.,Ltd
www.nseled.com
17
3.1 Function of Ports
3.1.1 PC: For connection to PC for program transmission through the network cable.
3.1.2 Input, Output, Screen1 and Screen6: For independent display of a single screen
or extended display of multiple screens.
3.1.3 Audio: Audio output port (optional), which can be connected to external
speakers or other Audio equipment.
3.1.4 HDMI: Video signal input interface, which can be connected to PC for
synchronous display.
3.1.5 USB: Can be connected to the USB Flash Drive to play the program materials
contained.
3.1.6 Power: Power interface for AC 110V/220V.
Chapter 3 Function Introduction
Other manuals for P2 Series
1
This manual suits for next models
7
