Olhausen Games OG Pro Air Hockey User manual

Congratulations on your purchase of the Olhausen
Games home entertainment table. We want to ensure
thatyouarecompletelysatisedwithyourpurchase.
So,pleasefeelfreetocontacteitheryourdealeror
Olhausen Games for any assistance in the assembly
ofyournewproductorforanyotherinformationyou
maywantorneed.
Air Hockey
Assembly Instructions
OG Pro
Tools Needed for Assembly:
• Wrenches
• PhilipsHeadScrewDriver
• Level
Assembly Procedure
DUE TO THE WEIGHT AND SIZE OF THE TABLE, IT IS RECOMMENDED THAT
(2) PEOPLE ASSEMBLE THE TABLE TOGETHER.
Step 1: Content Removal
• CarefullylifttheOGProSeriescabinetoutoftheboxandlayitonitstop,placingitonaclean 
andsmoothsurfacetoavoidscratchingthenish.
• Removethelegsfromtheboxandlocatetheaccessorypackage.
Step 2: Leg Assembly
• Attachthelegstothecabinetusing(4)boltsperleg.
• Tightenthelegboltsuntilboltheadsareushwiththetablesideapron.
 *Note:Over-tightningcandamagethesideaprons
• Repeat this process on each leg.
Step 3: Attach the Blower Motor
• Locatetheblowermotor,gasketand(3)mountingbolts.
• Placethegasketbetweentheblowermotorandtheairchambersurfacelocatedinthecenterof
 thebottomoftheplayeld
• Lineuptheholesinthebaseoftheblowerwiththepre-drilledholesintheairchamberand
 tightenall(3)bolts.
• Plug the blower motor into the wall.
Content Quantity
Cabinet 1
Legs 4
AccessoryPackage 1
Be sure to verify that all of the items listed above are included in the box before starting assembly
OG 110114 P1
R
(continued on page 2)
Assembly Instructions

OG 110114 P2
R
Step 4: Flip the Table Over
• Checkthatllthelegleversarescrewedallthewayintothelegs.
• Carefullyliftupandroatethetableontoitslegs.
 *DONOTALLOWWEIGHTOFTABLETOROCKONANYONEORTWOLEGSALONE.
 *Werecommendthat(2)ormorepeopleliftthetabletogether.
Step 5: Manual Scoring Unit
• Locatethetoprailwithpre-drilledholestotheleftandrightoftheelectronicscoringunitarea.
• Usingthe(2)scoreposts,(1)scorerodandbeads,attacheachassemblytotherail.
• Theblackscoringassemblycontains(4)blackbeadsand(1)redbeadandshouldbeplacedatone
 endoftherail
• Theredscoringassemblycontains(4)redbeadsand(1)blackbeadandshouldbeplacedattheother
 endoftherail.Theoddcoloredbeadsigniesthenalpointinagameandshouldbeplacedsothatit
 isthelastbeadpulledtowardyou.
Step 6: Power the Game
• Theblowermotorshouldbepluggedintothewall.
Step 7: Level the Game
• Adjusttheleglevelersuntilthepuckoatstrueontheplayingsurface.
• Formorepreciseleveling,usealevel.
• Placethelevelhorizontallyontheplayingsurfacepointingtowardsthegoalopenings.
• Checkthatallthelevelersarescrewedallthewayinasastartingpoint.
• Evenlyadjusttheleglevelersononeenduntilyouarehorizontallylevel.
• Turnthelevel90degreessoitispointingtowardsthescoringunit.
• Evenlyadjustthelevelersononesideofthetableuntilitisverticallylevel.
Specications subject to change without notice.
Assembly Instructions
continued for
OG PRO