Omnitech 15223 User manual

Omnitech GPS
User Manual
GPS Model No. 15223
OmnitechGPS_UM_S19510V3_English

i
Warranty Conditions
Manufacturer is not responsible for any product defects due to misuse, abuse, or usage of product in way that is
not in compliance with the written product instructions. To use this product other than expressed in the
instructions will void customer's product warranty.
Precautions and Notices
Do not attempt to operate the GPS Personal Navigation Device (PND) in a vehicle while the vehicle is in
motion or in anyway that interferes with safe driving
Secure your device to the vehicle in such a way so as to not endanger the driver or passengers while driving
or during operation.
Be attentive to roadway signage, all posted roadway information, and the condition of the road itself.
Calculated routes are for reference only; users must obey all traffic signs and local regulations.
GPS positioning is intended for use as reference, not precise measurement of direction, distance or
topography.
Do not place the device where it will block the driver’s vision
Do not place the device where the airbags are located or where the airbags could deploy.
Do not place the device anywhere in the vehicle without securing it in the holder.
Do not place your device in any area of the vehicle where the use of electronic displays is prohibited in motor
vehicles.
Do not use the device in a wet location.
Do not use the device close to hot areas such as radiators, stoves, or other products that produce heat.
Do not leave the product in direct sunlight or heat for extended periods of time. Overheating the battery can
be dangerous and/or cause malfunctions.
Do not push objects of any kind into cabinet slots or other openings in product. Slots provided for ventilation
must not be blocked or covered.
Do not use product on unstable table, cart, stand, tripod or bracket. Any mounting of the product should
follow manufacturer’s instructions, and should use a manufacturer-recommended mounting accessory.
Use the correct external power source indicated on the electrical ratings label.
Handle battery packs carefully. Battery pack could burn or explode if handled improperly. Do not open,
crush, or puncture battery pack. Do not dispose of battery pack in fire or water, or expose battery pack to
direct sunlight.
GPS signals cannot pass through opaque solid materials. Obstacles, such as tall buildings, tunnels, dense
trees and bad weather can affect signal reception. Window tint that contains metallic material can affect GPS
signal as well. Cordless phones, radar detectors, satellite radio receivers, and other wireless devices may
also interfere with GPS reception.
It may take a few minutes to successfully acquire GPS signals when turning on the GPS device for the first
time. Complete this procedure in an outdoor open space.
Map database may not cover one hundred percent of all areas and/or addresses listed.
This GPS PND may not be used for any purpose in which failure could lead to personal injury, physical, or
environmental damage.
Software version and user manual contents are subject to change without notices.
FCC Statement
Omnitech GPS Model Number 15223: It is herewith confirmed and found to comply with the requirements set up
by ANSI C63.4 & FCC Part 15 regulations for the evaluation of electromagnetic compatibility. This device
complies with Part 15 of the FCC rules; operation is subject to the following two conditions: (1) This device may
not cause harmful interference and, (2) This device must accept any interference received, including interference
that may cause undesired operation.
NavSupport Website: www.NavSupport.net/gps/15223/
NavSupport Customer Care Center: 1.888.554.6628

ii
Contents
1 – Getting Started 2
Configuration Wizard ................................................................................................................................2
Map Screen ...............................................................................................................................................3
Map Views .................................................................................................................................................4
Route Overview.........................................................................................................................................4
Cancel Route.............................................................................................................................................4
2 – Select Location and Generate Route 5
Go to an Address ......................................................................................................................................5
Points of Interest (POI) .............................................................................................................................8
QuickNav .................................................................................................................................................10
Recent Place ...........................................................................................................................................11
Address Book ..........................................................................................................................................12
3 – Route Management 15
Turn-By-Turn Directions .........................................................................................................................15
Avoid Roads ............................................................................................................................................16
Detour ......................................................................................................................................................18
Map Browsing..........................................................................................................................................19
Walking Mode..........................................................................................................................................19
Map Selection..........................................................................................................................................20
4 – Settings 21
Settings Menus .......................................................................................................................................21
Map Display.............................................................................................................................................21
Prompts ...................................................................................................................................................22
Language Settings ..................................................................................................................................22
Look & Feel Settings...............................................................................................................................23
GPS Settings ...........................................................................................................................................23
Units of Measure .....................................................................................................................................24
Time Settings ..........................................................................................................................................24
Brightness................................................................................................................................................24
About........................................................................................................................................................24
Help..........................................................................................................................................................24
Index 25

2
1 –Getting Started
Welcome to the world of mobile navigation! Simple operation, clear maps in 2D or 3D mode as well as
numerous innovative features and functions have made Omnitech GPS the essential guide for every
traveler – whether in the car, on foot or by bike.
Configuration Wizard
This wizard, which automatically starts the first time you use the device, lets you easily configure the system
settings by providing a step-by-step setup process. You can also configure these system settings by going to
the system options from the Settings menu.
•Language Settings – Set text and voice language preferences.
•End User License Agreement (EULA) – Please review the license information and check the I
Agree checkbox. The EULA screen appears each time you use a new map.
•Time Zone –You can set your time zone and check the Daylight Savings checkbox to adjust for
daylight savings.
•Units of Measure – Specify the system measurement units.
•Prompts – Configure the general navigation prompts and notifications.
•Driver Warning – When you start the device, the Driver Warning screen appears. Please take a
moment to review the information provided before tapping the OK button. Select the "Do not display
this warning again" checkbox to skip this message in the future.
Figure 1 – Map Warning Screen

3
Map Screen
You can use the icons displayed on this screen to view and receive information about your route.
Figure 2 – Map Screen
Map Screen Icons
1, 6
Zoom in or out of the map to view a larger and less detailed area, or a smaller area in
greater details.
2
Tap the compass to change the map view display as follows:
2D map view with the forward direction at the top.
2D map view with North at the top.
3D map view with the forward direction at the top.
3
Tap this icon to adjust or mute the volume.
4
When you have calculated a route, the Directions Bar displays
information about your next turn. Tap this bar for a complete list
of turn-by-turn directions.
5
The Information Bar is a toggle button that displays the
remaining travel distance and travel time, estimated time of
arrival, street name and address number, speed and altitude.
7
The red GPS receiver means that a reliable GPS signal is not yet located.
The green GPS receiver means that a reliable GPS signal is located and that you are ready
to navigate.
8
These icons display your power source and the battery state of the device.
9
Tap this icon to set your QuickNav location. When set, you can tap this button to
automatically calculate a route to this location.
10
Tap this icon to display the Main Menu.
3
1
2
4
5
7
6
8
9
10

4
Location Icons
Current location in Vehicle Mode or Walking Mode.
Last known location when GPS signal is unreliable.
Generated route
Tapping a Location on the Map Screen
You can tap a desired location directly on the Map Screen in both the 2D and 3D map views. This feature is
useful when you want to navigate to a specific point on the map, rather than by the street address. When
you tap on the map, the Popup menu appears with the following options:
Figure 3 – Point on the Map Options
Go There – Navigate to the selected point on the
map.
Add to my Favorites – Save a point on the map to
the Address Book as a favorite destination for future
use.
Set as Starting Point – Designate the selected point
as the starting point instead of your current location.
This works only when you have an invalid GPS signal
(such as indoors).
You can close the Popup menu by tapping the Map
Display button.
Map Views
You can choose to see a two-dimensional or three-dimensional map adjusted specifically for day time or
night time conditions. 2D and 3D can be set by tapping the Compass button on the Map Screen.
From the Settings menu, tap the Day View/Night View toggle button to view the map for day or
nighttime driving and tap the 2D View/3D View toggle button to display the map view in 2-dimensional or
3-dimensional views.
Route Overview
From the Manage Route menu (inside the GO menu) tap the Route Overview button.
An overview of your complete route, the total driving distance to your destination, the
estimated travel time, and the complete destination address, are displayed on the screen.
Cancel Route
From the Manage Route menu tap the Cancel Route button.
The current navigation stops and the GPS clears the route. You can only cancel a route
after a destination has been set.

5
2 –Select Location and Generate Route
Go to an Address
From the Go menu, tap the New Address button. The Enter address screen
appears, allowing you to choose how you want to enter address information. For
example, if you select City first, the first address screen lets you select from a list
of cities, the second screen a list of streets, and the third screen lets you enter an
address number.
Select from the following address entry options:
•City first – City > Street > Address Number
•Street first – Street > City > Address Number. Here you can enter a
street name without having to first select a city. This is useful when
searching for an address in a metropolitan area where there are many
cities and towns.
•Intersection –City> Street > Intersecting Street
Note: When a United States map is selected, the first address screen is always
Select State.
Tap from one of the Enter address options to display the first address screen.
Figure 4 – Selecting an Address
When entering an address using the keyboard, the characters appear in the Address field. The device
automatically searches the Address list for the first occurrence of the entered characters. After you have
selected a city, the device requests the next part of the address, such as street and address number.
You have the option of selecting the City Center instead of entering a street. City Center is the default that
shows above the keyboard before you start entering street letters.
If you don't know the address number, you can select the Street Midpoint.
Tap the OK button to move through the sequence of address screens.

6
Go to Another Country
From the Enter address screen, you can tap In Other Countries to select another country that you can
travel to by vehicle. First you will select the country, and then you will enter the address.
The followings maps are available on your GPS device:
•Map of USA.
•Map of Canada.
Toolbar Buttons
The following toolbar buttons appear at the bottom of many of the navigation screens.
When you tap this button for a selected address, group, or place, the device accepts
the choice and moves to the next screen in the sequence.
When you tap this button, the device returns you to the previous screen.
This button provides a list of command options available for the selected address or
place.
Keyboard Command Keys
The following buttons are available to enhance your search process.
Figure 5 – Search and Keyboard Buttons
1
Lets you remove a character that you have entered.
2
Lets you scroll up or down the list.
3
Lets you display different keyboard states. On the ABCD keyboard (shown), this toggles you between
the Alpha and Number keyboards. On the QWERTY keyboard this feature is unavailable.
Note: This device lets you search for city and street names without having special characters, such
as umlauts or accent marks, which are used in many European languages. For example, you
can enter Munchen for München
4
Tap the Keyboard button to display the keyboard when it is hidden. Tap the See List button to hide
the keyboard and see/scroll longer lists of address results.

7
Actions
Tap the Actions button to use an address:
Figure 6 – Actions for Addresses
•As Starting Point, which designates the selected address as the route origin (This works only when
you have an invalid GPS signal).
•To Show on Map, which displays the selected address on the map.
•As saved address – Tap to add an address to your list of favorite locations. For more information
about favorites, see Address Book on page 12.
•To see information – Tap to display additional address information and phone number (where
available).
Navigate to an Address
Figure 7 – Show on Map
The final step in the address entry is the GO
screen. Here you can validate your address and
you can select from the following route types:
Quickest – This option selects the route that
takes the least amount of time. Quickest is the
default setting.
Shortest – This option selects the route that is
shorter in distance. Note: The shorter route may
not always be the quickest.
Go – When you tap the Go button, the device
calculates the route to your selected destination.
Demo – Tap the icon to start navigating a
simulated route.

8
Points of Interest (POI)
The Points of Interest (POI) list is a collection of thousands of interesting or
useful places organized by easy-to-find categories. For example, you can use
this device to guide you to a shopping center, hotel, restaurant, or gas station.
Many categories have subcategories to provide for an even greater list of
choices. For example, gas station may have many subcategories each
representing a particular brand name. The same is also true for hotels.
Restaurants have subcategories that represent different types of food, such as
Indian, Italian, and French.
Search for a Location Near You
You can determine the area where you want to search for a specific place, such as a gas station, hotel, or
restaurant. Where I am is automatically selected.
Tap to search near your current location. This is the default.
Tap to search near your specified destination. If a destination has not been selected
and a route generated (by tapping the Go button), this button is disabled.
Tap to search for a POI in another location. This button opens the Address Search
Mode screen, which is described on page 5.
Search for a POI Name
Tap this button to display the Search POI keyboard screen, where you can search by
entering text in the POI Name field. The Smart Search System automatically displays
the POI names that match the characters entered. This device automatically displays
the POI entries and the distance each entry is from your current location.
For example, if you enter “Avis” and tap the Search button. This device displays all
Avis entries as shown in the figure below.
Figure 8 – Search by POI Name

9
Search for a POI Category
Tap the Browse button to display the most common POI groups. Many of these groups
will include several POI categories, which in turn my contain subcategories. Tap the
More button to go straight to the full list of POI categories.
Figure 9 – Most Common POI Categories
Show or Hide Symbol on Map
You can show or hide the POI symbol on the Map Screen by checking or clearing the checkboxes next to a
POI category or subcategory. For example, you can choose to show only French restaurants on the Map
Screen.
Figure 10 – Showing a POI Symbol on the Map

10
Actions
Tap the Actions button to use a POI:
Figure 11 – Actions for POIs
•As Starting Point, which designates the selected address as the route origin (This works only when
you have an invalid GPS signal).
•To Show on Map, which displays the selected address on the map.
•As saved address – Tap to add an address to your list of favorite locations. For more information
about favorites, see Address Book on page 12.
•To Sort by ABC, which displays the category entries in alphabetical order.
•To see information, which shows additional address information and phone number (where
available).
QuickNav
You can set a QuickNav destination so that every time you tap the QuickNav
icon on the Map Screen, the device automatically calculates the route to this
destination for you. When you tap the QuickNav button for the first time, you can
select a predefined address or a POI category.
Figure 12 – Setting the QuickNav Location
You can change the QuickNav settings by tapping the QuickNav button located on
the Setup 1 menu.

11
Recent Place
From the Go menu, tap this button to select an existing location from a list of
locations that you have previously traveled to.
Figure 13 – Traveling to a Recent Location
This device automatically stores the last 64 locations in memory. After 64 locations
have been saved, the older location entries are erased.
Actions
Tap the Actions button to use a recent location:
Figure 14 – Actions for Recent Places
•As Starting Point, which designates the selected address as the route origin (This works only when
you have an invalid GPS signal).
•As saved address – Tap to add an address to your list of favorite locations. For more information
about favorites, see Address Book on page 12.
•To Delete Item, which deletes an entry from the Recent Locations screen.
•To Clear List, which clears all locations in the Recent Locations screen.
•To see information – Tap to display additional address information and phone number (where
available).

12
Address Book
A Favorite is an address or POI that you have stored for easy retrieval. Save favorite addresses to your
Address Book and later you can easily travel to these destinations. Favorites can be saved by using the
Actions button within the New Address, Recent Places, and POI entry screens. By default your favorite
will be placed into the Favorites group. You can also create your own custom groups; e.g. for a city or
activity.
Creating an Address Book Group
From the Address Book screen, tap the Actions button to add, edit, or delete groups.
Enter a group name and select a group icon (Icon Selection MAY NOT BE AVAILABLE in
some regions).
Figure 15 – Adding a Favorites Group
Saving a Favorite Address
Within the New Address, Recent Places, or POI screens, tap the Actions
button and then tap the As saved address button. Select the group to which
you want to add your favorite address.
Figure 16 – Adding a Destination to your favorites
The My Favorites group is the default group where all favorites are stored if
not assigned to a custom group. This group cannot be deleted.

13
Going to an Address Book Location
From the Go menu, tap this button to display the screen containing your
favorite addresses. Select a group, for example Restaurants. The device
displays a list of stored locations within the group. Select a favorite address
and tap OK.
Figure 17 – Going to a Favorite Destination
You can check or clear the checkmarks next to any group to show or hide the
group symbol on the Map Screen.
Setting an Alert for an Address Book Group
Alerts let you know that you are within a certain distance of an item in an Address Book
group.
Figure 18 – Setting Your Favorite Alerts
Use the right and left scroll arrows to set the distances for the 1st and 2nd Alerts.
In the Set Alert Distances screen, you can disable an alert by setting the 1st Alert to Off
or by clearing the checkbox next to the selected group.
Notes:
•Favorite Alert settings affect all Favorites groups.
•The 2nd Alert must be set to sound at a closer distance than the 1st Alert.
•Alerts can be set for a group but not for individual locations. Of course, you can
always create a group that has just one location.

14
Actions
While highlighting a favorite address within a group, tap the Actions button to use the address:
Figure 19 - Actions for Address Book
•As Starting Point, which designates the selected address as the route origin (This works only when
you have an invalid GPS signal).
•To preview on map, which displays the selected address on the map.
•To Edit a Fav. Location, which changes the name, comment, or group location for the selected
address.
•To Delete Fav. Location, which removes the selected address.
•To see information, which displays additional address information.

15
3 –Route Management
Turn-by-Turn Directions
From the Manage Route menu (inside the GO menu), tap this button to display a
complete Turn-by-Turn list of directions from your current location to the selected
destination. The device continuously updates the Turn-by-Turn screen to display the
most current instructions as you navigate the route.
You can also reach this screen by tapping the Directions Bar on the Map Screen
(second bar from the bottom).
Figure 20 – Turn-by-Turn Display
Note: The first turn is at the top of the list and the final turn is at the bottom,
identified by a checkered flag.
The following options are available:
Route
Tap to display your entire route on the Map Screen, plus the travel distance and the estimated
travel time remaining.
Turn
Tap to display the next turn on the Map Screen, including the street name, the distance to the
turn, and the turn direction.
Avoid
Tap to avoid the selected turn in the Turn-by-Turn list. The device recalculates the route
automatically. Note that when you exclude a turn, the recalculated route may take longer.

16
Avoid Roads
You can specify that certain types of roads be permanently excluded from your route
calculations, and you can create your own list of specific roads to avoid. Use this feature
when you want to avoid congested roads, toll roads, or unsafe streets.
From the Manage Route menu, tap the Avoid Roads button. The Avoid Roads screen
appears, displaying predefined road groups.
Figure 21 – Predefined Road Groups
The GPS provides the following predefined road
groups:
•Ferries – The default value is to avoid
•Gated Communities – The default value is
to allow
•Highways – Roads that allow for high
volume, maximum speed traffic movement
between and through major metropolitan
areas. The default value is to allow
•My Roads to Avoid – This is a default
folder that lets you store roads to avoid. You
can display the items in this folder and allow
or avoid specific roads. The default value is
to avoid
•Toll Roads - The default value is to avoid
To allow or avoid a predefined road group:
•Select a predefined group and tap the
Allow/Avoid toggle button, then tap the
Back button. The next time you calculate a
route, the device calculates a route based on
your avoid or allow selections.
Note: predefined road groups (Highways, etc.) are
allowed or avoided as an entire group. You
cannot allow or avoid individual toll roads,
highways, or ferries.

17
Creating a Group
Tap this button and select Add Group. From the Add Group screen, enter the group name
and tap OK.
Figure 22 – Add a Road Group
The Actions screen also lets you edit or delete a selected group.
Adding a Road to a Group
When you tap My Roads to Avoid or a road group that you have created, the device displays the group
screen, which lets you designate roads to avoid. From this screen, you can use the Allow or Avoid buttons
to include or exclude individual roads when calculating a route.
Figure 23 – Storing Road Locations
Tap Actions and then the Add Road button. Select the city and street. The road is displayed on the Show
on Map screen. Tap the Avoid button.
Figure 24 – Adding a Road to Avoid

18
Actions
Tap the Actions button:
•To Add Road – Tap to add a new road to avoid to a group.
•To Edit Road – Tap to rename the road and/or select a different group. When you have made your
changes, tap Save.
•To Delete Road – Select a road and tap this button to remove the road from your group. The GPS no
longer avoids the removed road.
•To Show on Map – Tap to show the map with the displayed destination for you to review before
creating a route.
•To see information – Tap to display the location’s address information.
Detour
From the Manage Route menu (inside the GO menu), tap the Detour button. The
Detour screen lets you instruct the GPS to create a detour to avoid a road event, such as
an accident.
Figure 25 – Avoiding a Road Event by Performing a Detour
Select the Detour distance for which you want to generate a detour. For example, if you are traveling on a
major highway and you are alerted by the news that there is traffic for the next 3 miles, you can have the
device calculate a detour that takes you off the highway and then returns you back to the highway after a
distance of 3 miles.