Product features
Power on :Press on/off button for about 2
seconds, the light will turn from red to blue and
flashing about 5 times ,then the camcorder
start to work .
Charging: Please remove the battery, before insert the USB cable to the USB
port, then connect the cable to the power supply or computer ,the red light
will be on when charging ,the blue light will be on after fully charged .
Reset: If it can not work or be crashed, please use a slim stick inserted to
the reset hole and press lightly one time to reset.
Time setting: After turn on the camcorder , it will automatically generate a
time file named as “userconfig.txt” in the root directory of the memory
storage. If disconnected the battery part anytime , it requires to modify the
time and save , it will record with correct current time after restart.
Turn off:When the camcorder is working press
on/off button about 3 seconds, it will be turned off.
If press only once ( one second), it will get into
standby mode while the red light will be on; Before
connect the USB cable to computer to read the
recorded files, please get the camcorder turned off
and remove the battery.