ORBLON OCS04 User manual

Please read all safety rules and instructions carefully before operating this tool.
Dear Customer：
USER MANUAL
4-INCH MINI CHAINSAW
MODELS:OCS04
Product Questions or Concerns？Contact US：[email protected]

Product Information
Understanding the composition of your chainsaw
How to properly use the security lock
How to lubricate the chain
How to adjust the chain tightness
How to remove the chain
How to replace the replacement chain
How to charge the battery with the charger
How to troubleshoot
The use and care of chainsaws and precautions
The use and maintenance of battery tools
Safety Warnings for Charger
Maintenance & Cleaning
Warranty Terms
Extend Your Warranty by 1 Year
EN.1
EN.2
EN.3
EN.4
EN.5
EN.6
EN.7
EN.8
EN.9
EN.10
EN.11
EN.11
EN.12
EN.12
EN.12
CATALOG

Product Information
Intended Use
This machine is suitable for garden
pruning, shrub pruning, small
branch pruning, wood cutting,
widely used in gardens, parks,
farms, roads, pastures, orchards,
greenhouses.
NOTICE: Any other uses or modifi-
cations to the machine are deemed
to be improper usage and may
result in serious physical injury. The
manufacturer accepts no responsi-
bility for damages attributable to
misuse.
EN.1
Always check the voltage of the power supply corresponds to the voltage
on rating plate.
4 INCH MINI CHAINSAW
Model No.
Guide Plate Length
Technical Specifications
OCS04
100 mm
4 Inch
Max. Cutting Diameter
Electrical Safety
BATTERY PACK
Battery Pack Type
Voltage
Capacity
LI-Ion
20 V
2.0 AH
50 Min
1.5 H
ORBLON 2.0AH Battery
Working time
ORBLON Charger
Charging time

Understanding the composition of
your chainsaw
EN.2
Protective Baffle Safety Button
Guide Bar
Cover Fixing Nut
L-Shaped Chain Screwdriver
Battery Pack
Start Switch
Chain
To reduce the risk of serious personal injury, turn the unit off and remove
the battery pack before making any adjustments or removing/installing
attachments or accessories. An accidental start-up can cause injury.
NOTICE：
Lubrication Button Oil Can
Brushless Motor

How to properly use the security lock
EN.3
LOCKUNLOCK UNLOCK
NOTICE：
When not using the chainsaw, please move the safety lock to
the "Lock" position to prevent accidental injuries.
1. It can be easily operated by users, whether they prefer using
their left hand or right hand.
2. Our chainsaw only requires the safety lock to be released,
allowing the device to be operated by simply pressing the
"Start" button. This reduces hand fatigue and improves work
efficiency compared to traditional safety locks.
Our Safety Switch Advantages：

How to lubricate the chain
Oiling System-Oiling the Chain
EN.4
Press
Oil Box
1. Add ordinary chain oil & lubricating oil to the oil box.
2. During the chain rotation, press the oil pump to deliver
lubricating oil to lubricate the chain.
We recommend lubricating every 10 cuts.
NOTICE：

How to adjust the chain tightness
EN.5
NOTICE：If the chain is slightly loose during the constant
cutting process, please don't worry, we can follow the steps
below to adjust the chain tightness.
1. Counterclockwise loosen the cover
fixing nut can be, without removing
the cover its.
3. Tighten the cover fixing nut clock-
wise to finish the adjustment.
2. Turn the cover screw by L-type chain
screwdriver to adjust the chain tightness,
make sure there is only about 0.3cm gap
when pulling the chain, otherwise the chain
will fall off or cause the machine to jam.
Slowly turn the screw to adjust the chain. If you want to fix the
gap between the chain and the guide plate to ensure that it will not
loosen during use, then forcefully tighten the cover plate nut.
Please adjust the tightness of the chain before using the device.lf the chain
is too loose or too tight, it is easy to cause the chain to fall off or the device
to jam.
Please adjust according to the following tips：
Do not continue to loosen the
tightening screws!
Do not use an electric drill to
loosen the screws!
NOTICE：

How to remove the chain
1. Loosen the cover retaining nut counterclockwise.
2. Lift up the protective baffle and remove the side cover.
3. Remove the guide plate and chain.
Remove the chain：
EN.6

How to replace the replacement chain
Install the chain：
EN.7
1. Clean the motor and make sure
there is no debris. (With Cleaning
Brush)
2. Install the guide plate and chain,
make sure the chain plate is oriented
correctly.
3. Adjust the position of the fasteners
on the baffle and tighten the chain in
advance to facilitate the installation
of the cover.(With L-Chaped Chain
Screwdriver)
4. Lift up the protective baffle, put
the cover on and tighten the cover
fixing nut clockwise.
Direction of the chain blade
Confirm the chain tightness is proper. The appropriate tension is when the
chain is tightly attached to the guide plate and can be pulled by hand with
0.1 inch. Please pull the guide plate by hand to ensure that it is fully fixed.
If not, continue to tighten the bar tightening knob.
NOTICE：

How to charge the battery with the charger
EN.8
Before using for the first time,the battery needs to be fully charged.
Do not expose the battery to extreme conditions such as high temperature
or shock, otherwise there is a risk of personal injury due to electrolyte leakage.
Before charging, please check the surface of the battery to make sure it is
clean and dry.
Use our included adapter to charge the battery, and it takes about
1.5 hours for a single full charge (note: the charging interface is at
the position shown in the above figure).
Indicator Light
Red
Green Charging completed
Charging
Status
LED Light Switch
Release Button