Origen ae MM100 User manual

Origen
MM100 user guide

Thank you for purchasing this Origen htpc enclosure. We recommend
that you read this user guide thoroughly before installation.
ae
Origen is not responsible for any damages due
to external causes, including but not limited to,
improper use, problems with electrical power,
accident, neglect, alteration, repair, improper
installation or improper testing.
Copyright © 2014 Technology
All rights reserved
ae
ae
Origen
Origen has rapidly grown to be one of the worlds leading HTPC enclosure
manufacturers since its inception in 2000. We were one of the first companies
with the vision to produce high end htpc enclosures that harmonise with
mainstream audio visual equipment, allowing the pc to leave the office
and fit effortlessly into the living room environment.
We are driven by the passion to produce exceptional products
that push technical and aesthetic boundaries to new levels.
For more information on all of our products,
visit www.origenae.com
ae
MM100 user guide

Mm100 overview / Accessories
Opening the case
Hard & Optical disk drive installation
Mainboard installation
Max height CPU cooler
IR100 cable reference diagram
Adapter specification
Connecting adapter
Pico power cables length
4
5
5
6
6
6
7
7
7
MM100
index

Power button
Power LED
Slot for optical disk drive (ODD)
IR acryl window
USB 3.0 ports
Top panel
60mm low dB exhaust fan
IR100 IR receiver
HDD/ODD bracket
Power button PCB
DC input
Back intake vent
LP bracket slot
1
2
3
4
5
6
7
8
9
10
11
12
13
MM100 overview
These are the main features and controls
of the MM100 htpc enclosure.
4
125
36
710
11 12 13
8
1
2
3
4
5
Accessories
ZF120A external adapter
120W Pico DC to DC module
RC153 remote control
AC plug cable
Mounting screws
4
1
3
4
9
2

Opening the case
Remove the 4 fixing screws as indicated1. Carefully raise the panel as shown 2.
12
Hard & Optical disc drive installation
Loosen(no need to remove) the 2 fixing screws and remove 2 fixing
screw. Separate drive bracket like a picture(1) and (2) by pulling out
carefully.
Two 2.5” HDDs can be installed. After fixing HDD with screws, and fix
slot load ODD.
drive
bracket
12.7mm slot
load ODD
5
Loosen
1
2

Max height CPU cooler
The maximum size of CPU cooler is
55mm. If you install hard & optical disk
drive, the standard cooler of intel or
AMD and third part CPU cooler of
below 55mm will be fitted in MM100.
Left side view
Max CPU cooler height
55mm
Mainboard installation
If a mini-itx board is to be
installed in the MM100, the
4 spacer bolts supplied must
be used. Screw the bolts
into the bottom of chassis as
indicated.
Mounting
holes
IR100 cable reference diagram
This is a general overview illustrating how the internal PCBs interconnect. Please refer to your
motherboard manual for the location of the correct ports and header pins.
Once your windows OS has been installed, IR100 module can be detected automatically and
be controlled by MCE remote.
‘
6
To USB Header
From Chassis Power Switch
6
*As long as mainboard supports USB wake-up function, you can turn ON from System OFF
state with your remote control.

7
Adapter specification (ZF120A)
input
rated input voltage
input voltage range
input frequency range
input current
output
output rated voltage
output current
external dimensions
- 100vac / 240 vac
- 90 vac to 264vac
- 47Hz to 63Hz
- ≤2.0A
-12v
-0A ~ 9.8A
- 70(w) x 170(h) x 36(d) w
h
d
Adapter specification (ZF120A)
Connecting adapter
Connect external adapter(FSP150-AHAN1) to DC jack and AC cord to external adapter as shown.
AC cord in
Adapter specification (ZF120A)
Pico power cables length
ac jack cable 300mm
150mm 100mm100mm
150m m

Global HQ
Website
#209 Baeksan B/D
763-2 Hengsin-Dong
Dukyang-Gu
Goyang City
Gyounggi-Do
412-220 South Korea
www.origen .comae
Origen