OSTO LEIPZIG 34 User manual

× 15
× 12
× 270
× 15
5×70
4×506×140
M8×70
Ø 3 mm
Ø 4 mm
Ø 5 mm
Ø 8 mm
× 90
4×40
1/17
OSTO LEIPZIG 34
PREPARE THE GROUND, UNWRAP THE PACKAGE,
LAY OUT THE COMPONENTS, FIND THE TOOLS.

2/17
OSTO LEIPZIG 34
MAKE SURE THAT THE BOTTOM LOGS
ARE INSTALLED ON A LEVEL SURFACE.
CHECKING ALL DIRECTIONS,
INCLUDING CORNER TO CORNER. 2%
LAY OUT THE BOTTOM LOGS
AND SQUARE IT BY MEASURING
FROM CORNER TO CORNER.
A LG-1 B LG-1
A C
DB
AB=CD
0°
1 BL-1
2 BL-1
2 BL-1

× 4
5×70Ø 4 mm
3/17
OSTO LEIPZIG 34
ATTACH THE LOGS
WITH SCREWS.
3%

× 4
5×70Ø 4 mm
× 4
6×140Ø 5 mm
4/17
OSTO LEIPZIG 34
5%
ATTACH THE FIRST ROW OF
WALL LOGS INTO THE BOTTOM
LOGS WITH SCREWS.
1 LG-5
2 LG-2
2 LG-2
6×140
5×70

5/17
OSTO LEIPZIG 34
12%
AFTER PLACING 3-4 ROWS OF WALL LOGS, TAP EACH
WALL LOG IN PLACE USING A HAMMER AND THE
HITBLOCK PROVIDED, TO TIGHTEN THE LOGS.
HITBLOCK

6/17
OSTO LEIPZIG 34
13%
SLIDE THE DOOR IN,
ATTACH THE HANDLE.
B34DD1
3 LOGS IN PLACE

7/17
OSTO LEIPZIG 34
26%
DON`T FORGET TO
TIGHTEN THE LOGS AFTER
EVERY 3-4 ROWS.
HITBLOCK

× 4
6×140Ø 5 mm
8/17
OSTO LEIPZIG 34
42%
INSTALL THE GABLES WITH LONG SCREWS
TO THE WALL LOGS ON THE FRONT AND
REAR WALLS.
15 LOGS IN PLACE
GABLE
B TL-1
A TL-1
A LG-2
B LG-2

× 6
6×140Ø 5 mm
9/17
OSTO LEIPZIG 34
43%
INSTALL THE ROOF PURLINS AND
ROOF ELEMENTS 1, ATTACH THEM
WITH SCREWS.
RFR
RFB

× 246
4×50
10/17
OSTO LEIPZIG 34
45%
PLACE THE FIRST ROOFBOARD FLUSH WITH
THE END OF THE PURLINS AND ATTACH
WITH 6 SCREWS, 3 INTO EACH NEXT.
RB

× 40
4×40
89%
RR2
RR1
FOR THE FASCIA TRIMS
INSERT SCREWS AFTER
EVERY 0,5 METERS.
11/17
OSTO LEIPZIG 34

91%
EAVES EDGES GO ON TOP
OF THE ROOFING*.
*(NOT INCLUDED)
× 32
4×40Ø 3 mm
12/17
OSTO LEIPZIG 34
RF
EE

ATTACH ROMBS WITH SCREWS.
95%
× 4
4×40Ø 3 mm
13/17
OSTO LEIPZIG 34
ROMB

× 12
M8×70
Ø 8 mm
4CM
20CM
WINDBOARD
14/17
OSTO LEIPZIG 34
97%
DRILL THROUGH THE WALL, HOLE MUST
BE AT THE BOTTOM OF THE OVAL,
ATTACH WITH BOLT.

15/17
OSTO LEIPZIG 34
98%
IF DOOR IS TILTED,
PUSH THE DOOR FRAME SO
THAT ALL CORNERS ARE 90º.
90º
90º

16/17
OSTO LEIPZIG 34
99%
IF DOORS ARE IN DIFFERENT HEIGHTS
OR THERE IS A GAP BETWEEN THEM,
ADJUST 3 SCREWS ON DOOR HINGES.

17/17
OSTO LEIPZIG 34
WHEN THE HOUSE IS ASSEMBLED, YOU SHOULD
COVER THE TIMBER WITH WOOD PROTECTIVE SEAL,
PAINT OR STAIN AS SOON AS POSSIBLE TO AVOID
DETERIORATION TO THE WOOD.
100%