Palsonic TFTV5580MW User manual

Offering Australians quality since 1958 www.palsonic.com.au
User’s Manual
TFTV5580MW
54.6cm (21.5”) FHD LED TV / DVD Combo with DVB-T
RECORD
DTV via USB
SUPER
Slim Design
COMPONENT
Input
USB 2.0
Connection
LED TV
Liquid Crystal Display
TELETEXT
HIGH-DEFINITION MULTIMEDIAINTERFACE
VIEW ALL FREE
Digital Broadcasts

7 DAY EPG
electronic program guide
WXGA
PC input
*Where available
PARENTAL
Lock
75mm
75mm
H.264
MPEG-4/AVC

I
Important safety information
Grounding information
This apparatus must be grounded. To ensure safe operation, the grounded plug must be
inserted only into a standard grounded power outlet which is effectively grounded through
normal household wiring. Extension cords used with the equipment must be hazardous
.The face that the equipment operates satisfactorily only means it is grounded, but the
installation may not necessarily be safe. For your safety, if in any doubt about the effective
grounding if the equipment or power outlet, please consult a qualified technician.
Product disposal
Do not dispose of the TV with general household waste. The LED screen contains a small
amount of liquid crystal and mercury. For disposal or recycling information, please contact
your local authorities.
Safety precautions
Please read all of these instructions before you operate your television and save these
instructions for later use. This unit has been engineered and manufactured to ensure your
personal safety, However, improper use can result in electric shock or fire hazards. In order
not to defeat the safeguards incorporated in this equipment, please observe the following
basic rules for its installation, use and servicing.
• Unplug this television equipment from the wall outlet before cleaning.
• Do not use liquid cleaners or aerosol cleaners. Use a soft cloth moistened with water for cleaning.
• Use only the attachments recommended by the television equipment manufacturer.
• Do not use this television equipment near water-for example, near a bath tub, washbowl, kitchen sink
or laundry tub, in a wet basement, or near a swimming pool.
• Do not place this equipment on an unstable surface, stand, or cart. The television equipment may fall,
causing serious injury to a child or an adult, and seriously damage the equipment.
• When carrying the TV, hold it under the maim unit. Do not carry the TV by its speakers, Both the base
and the speakers could come off, causing you to drop the TV, possibly resulting in damage to the TV
or causing injury.
• Television equipment and cart combination should be moved with care. Quick stops, excessive force,
and uneven surfaces when moving may cause the equipment and cart combination to overturn.
• Shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit approved
by the manufacturer.
• Slots and opening in the cabinet and the back or bottom are provided for ventilation. To ensure
reliable operation of the television equipment and to protect it from overheating, these opening must
not be blocked or covered. This television equipment should not be placed in an enclosed installa-
tion such as a bookcase unless proper ventilation os provided.
CAUTION
RISK OF ELECTRIC
SHOCK; DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
This symbol is intended to tell the user
that parts inside the product pose a
risk of electric shock to persons.
This symbol is intended to tell the user
that important operating and servicing
instructions are described here.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. TO AVOID ELECTRIC SHOCK, INSERT
TPLUG FULLY INTO THE POWER OUTLET.
CAUTION

II
• The openings should never be covered with a cloth or other material, and the bottom openings
should not be blocked by placing near or over a radiator or heat source.
• This Television equipment should be operated only from type of power source indicated on the
marking label. If you are not sure of the type of power supplied to your home, consult your
television dealer or local power company.
• As a safety feature ,this television equipment is equipped with a grounded power plug, If the plug
does not fit in your power outlet, contact your electrician. Do not modify the plug and defeat this
safety feature.
• Do not allow anything to rest on the power cord. Do not locate this television equipment where the
cord may be damaged due to lightning and power-line surges.
• Follow all warnings and instructions marked on the television equipment.
• If an outdoor antenna is connected to the television equipment, be sure the antenna system is
grounded so as to provide some protection against voltage surges and static charges.
• For added protection or this television equipment during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the
antenna. This will prevent damage to the equipment due to lightning and power-line surges.
• An outdoor antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such power lines or circuits. When installing
an outdoor antenna system, extreme care should be taken to keep from touching such power lines
or circuits as contact with them might be fatal.
• The mains plug or the appliance coupler is used as the disconnect device, the disconnect device
shall remain readily operable. The mains plug is connected with the electrical outlet with safety
ground wire.
• Do not over load wall outlets and extension cords as this can result in fire or electric shock.
• Never push objects of any kind into this television equipment through cabinet slots as they may
touch dangerous voltage points or short-circuit internal parts. This could result in a fire or electric
shock. Never spill liquid of any kind in the television equipment.
• Do not attempt to service this television equipment yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
• Unplug this television equipment from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
— When the power cord or plug is damaged or frayed.
— If liquid has been spilled into the television equipment.
— If the television equipment does not operate normally by following the operating instructions.
Adjust only those control that are covered by the operating instruction as improper adjustment
of other controls may result in damage and will often require extensive work by a qualified
technician to restore the television equipment to normal operation.
— If the television equipment has been dropped or the cabinet has been damaged.
— When the television equipment exhibits a distinct change in performance
—this indicates a need for service.
• UP on completion of any service or repairs to this television equipment ,ask the service technician
to perform routine safety checks to determine that the television is in safe operating condition.
• When replacement parts are required, make sure that the service technician has used
replacement parts specified by the manufacturer that have the same characteristics as the
original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
• Note to CATV system installer: This note is to remind the CATV system installers that the cable
ground shall be connected to the grounding system of the building, as close to the point of cable
entry practical.

III
Handling the LED screen
• Do not leave the LED screen facing the sun as it can damage it. Take care when you
place the TV by a window.
• Do not push or scratch the LED screen .Do not place a heavy object on the LED
screen. This may cause the screen to lose conformity or cause LED panel
malfunctions.
• If the TV is used in a cold place, a smear may appear on the screen. This is not a
malfunction. The screen will return to normal as its temperature rises to a normal
operating level.
• If a still picture is displayed for a long time on the TV screen, ghosting may occur for a
while. The ghosting will eventually disappear.
• If the LED panel becomes warm during operation, this is normal and not a malfunction.
Handing of broken glass and liquid crystal leakage
If the LED panel is damaged, crystalline liquid leakage may occur, or scattered broken
glass may result. Do not touch broken glass or crystalline liquid (which is toxic). With bare
hands that have cuts, skin irritation or poisoning may result. If any crystalline liquid gets
into mouth or eyes, rinse thoroughly with and consult your doctor.
CAUTION: IF the set is not going to be used for a long period, such as during a
vacation, unplug the set from the wall outlet to economise power.
(If the TV set is plugged in, a slight current still flows, even with the
power button in OFF position)
Handing of broken glass and liquid crystal leakage
IMPORTANT NOTICE
This product composes up to 6.0 million cells and a few cell defects may
occur In the manufacture of the panel. Several dead pixels (allow up to 2
bright or 2 dark pixels) on the panel are deemed acceptable by the industry
standards. In line with manufacturers and would not mean that the
panel is faulty. Dead pixels panels with 6 pixels or more within 12 month
period, Palsonic Corporation Pty Ltd. complies with industry standard
and reserves the right to repair the unit and non-refundable. We hope you
will understand that the product that corresponds to this standard is
regarded as acceptable.

IV
Overview of the LED TV..................1
Features..............................................1
Opening the packing.............................1
Product components.............................2
Back View............................................. 2
Rear View..............................................3
Remote control......................................4
Using the OSD menus.....................
DVD Function...................................
..6
15
15
Channel Adjustment...............................6
Picture Adjustment.................................
Information Functions............................
15
16
17
18
DVD Player Functions..........................
General Setup Adjustment....................
Audio Setup Adjustment.......................
Preference Setup Adjustment...............
.8
Sound Adjustment..................................9
Time Adjustment....................................10
Lock Adjustment....................................11
Setup Adjustment..................................12
Media Operation.................................. 13
Record...................................................14
Specifications....................................19
Troubleshooting.................................20
Table of Content

Overview of the LED TV
Congratulation on purchasing the LED Television. This product has been designed
to provide you with a rich audio and video experience. This monitor enables you
to watch broadcast, cable television or channels, connect VCR, VCD or DVD play-
er to watch your favorite movies, or connect a computer to use the display as a
monitor. The TV is equipped with convenient control buttons and a handy remote
control to let you adjust the TV setting and customize the TV preferences through
an easy-to-use on screen menu system.
Features
Enjoy the versatility of your LED TV with its wide variety of features:
•Color active matrix TFT LED TV with remote control
•Safe, sturdy construction
•Audio / Video support:
—HDMI input
—PC input
—PC AUDIO input
—YPbPr input
—AV input
—RF input
—USB input
•On-Screen Display (OSD) menu system
•Built-in 2 speakers
When you unpack this LED TV, make sure the box contains the following items:
LED Color Television
Remote Control (with batteries)
User Manual
Warranty Registration Card
Quick Start Guide
AV Cale
If any of these items appears to be missing or damaged, please contact your vendor or authorised
service personnel for assistance.
Opening the packing
The following section describes the various components of the LED TV. Please
take a few moments to familiarize yourself with the product and control panel
before using it.
1
•Maximal resolution: 22” 1920x 1080

Product components
Back view
VOL
INPUT
Increase or decrease the volume.
CH
Increase or decrease channel numbers.
Switch the input sources .
MENU
Press the button to enter on screen Display (OSD).
POWER
Turn the TV on or off.
Remote Inductor and Power Indicator
2
1
2
3
4
5
6
7
OPEN
DVD ROOM
PLAY
OPEN
To open the disc tray.
6
PLAY
Press to play disc.
7

Rear view
USB
Connect to portable USB device such as USB flash / hard device.
DC 12V
HDMI IN
Connect to 12V Poewer supply.
Connect to the VGA output of your device.
PC IN
Connect to the audio output of your PC (earphone jack)
YPbPr
Connect to the component output of your component device.
AV IN
Connect to the audio and video output of A/V device.
RF IN
SPDIF
Connect to the UHF antenna or coaxial cable from local TV.
3
Connect an optional coaxial digital cable (not included) through
a compatible amp/receiver to enjoy superior audio sound.
HDMI 2 IN
SPDIF
DC 12V
8
8
9
Connect to the HDMI output of your device.
9HEADPHONE
Connect a stereo headphone (3.5mm) for private listening.

• If direct sunlight shine directly on the remote sensor, remote control’s operation may be unstable,
and the effective range will be shorter.
• Do not hit or violently shake the remote control.
• Never expose the remote control to high temperature or humidity.
• If the remote is not used for an extended period of time, remove the batteries to prevent damage or
injury from possible battery leakage.
Remote Control
4
121
23
22
24
25
26
28
27
29
30
31
32
3
6
8
10
2
4
5
7
9
11
13
12
14
15
17
19
16
18
20

5
BUTTON FUNCTIONS
1. POWER Turn the TV on or off.
2. TEXT
11.INFO
12. OK
13. CH.LIST
5.
Exit the current menu.
Display a variety of information about current channel.
15. NICAM
16. AUDIO
17.
6.
7.
9.
8.
Press to display a list of favorite.
Only use in DVD mode.
18.
19.
20.
21.
22.
23.
25.
26.
HOLD
SIZE You can change the picture size in the teletext mode.
28.
29.
27.
Start the text mode.
3. CANCEL Videotext hidden button.
Press to scan in reverse.
30.
31.
Press to scan in forword.
32.
Direction button.
MUTE Disable the audio output.
VOL +/- Press +/- button to control the volume up or down.
Select an audio source for the current programme.
10.MENU Enter or exit the OSD menu.
SLEEP Press the button repeatly to set the time to turn off the TV.
E
D.SETUP
PG
EXIT
Press to display electronic program guide menu.
DVD set up menu.
Hold freeze the current teletext page on the screen.
TV/R
OPEN
TITLE
D.MENU
ANGLE
GOTO
REP
Angle button.
Search button.
TITLE button.
DVD menu button.
Select the TV/RADIO mode.
EJECT button
INDEX Display a list and information about the teletext pages.
FAV
10+
CH +/- Press +/- button to switch the channels.
SUBPAGE
Make sure the adjustment setted previously.
REVEAL
SUB
SOURCE
REC
Start the subtitle mode.
Display or remove the content that is hidden.
Display the submenu of the text.
Press to stop the current program.
Press to start recording.
Press the button to stop the current program.
To play the previous chapter, title or track.
To play the next chapter, title or track.
Switch to the previously viewed channel.
ASPECT
24.RECALL
Switch the screen ratio: auto, 4:3, 14:9, zoom1, zoom2.
Select the input source.
4. NUMBER
KEYS Press number keys to enter channel numbers.
Display the channel list.
Repetition button.
14. COLOUR
KEYS Different input source has different functions.
Press repeatedly to cycle through the NICAM mode.

Using the OSD MENU
The On-Screen Display (OSD) menu system provides a quick and
simple method to adjust LED TV base setting. OSD menu can be
viewed using both the remote control and the control buttons on the
front panel.
1. Press MENU button on the front panel or MENU button on the remote
control to display the main menu.
2. Press ◄/► buttons on the remote control
to select the Channel Setting
OK or ▼ buttons for the submenu.
3. Press ▲/▼ buttons on the remote control
to select the item you want to adjust.
4. Press OK button on the remote control and press
▲
/
▼
◄/► buttons to
change the status.
5. Press MENU button to go to the previous menu.
Channel Adjustment
After changes settings of the OSD menus, the new settings are confirmed automatically
when OSD picture vanish, even did not press the menu to exit the OSD system.
CHANNEL
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
Programme Edit
Move MENU Return OK Select EXIT Exit
6
menu, then press

Channel Adjustment
EXIT MENU
OK
Auto Tuning Press “ OK ” button to enter Auto tuning and start channel
tuning.
ATV Manual Tuning Press “ OK ” button to
enter ATV Manual Tuning.
DTV Manual Tuning Press “ OK ” button to
enter DTV Manual Tuning.
Programme Edit Press “ OK ” button to enter Programme Edit.
Sub windows info:
Current CH 1
Color System SECAM
ATV Manual Tuning
Sound System DK
Fine-Tune 44.00MHz
AFC Off
Search
AFC Of
f
Menu Back Exit
ATV Manual Tuning
Programme Edit:
Press ▲/▼ button to select the channel you want to edit.
Press the red button on the remote control to delete the channel;
Press the green button on the remote control to rename the channel;
Press the yellow button on the remote control to move the channel;
Press the blue buttonon the remote control to skip the channel;
Press the FAV button on the remote control to add or delete favourite channels.
1 C-04
2 S-43
3 S-03
4 S-06
Delete
OK
Move
Programme Edit
5 S-10
6 C-09
ATV
ATV
ATV
ATV
ATV
ATV
FAV
FAV
Skip
Rename
7
Move
Menu Back
Exit

1. Press MENU button on the front panel or MENU button on the remote control
to display the main menu.
2. Press ◄/► buttons on the remote control
to select the Picture menu, then
OK or ▼ buttons for the
submenu.
4. Press OK button on the remote control and press
▲ / ▼ ◄/► buttons to
change the status.
5. Press MENU button to go to the previous menu.
Sub windows info:
Picture Adjustment
Picture Mode Press “ OK ” button to
enter Picture Mode, then press ▲
/
▼ but-
tons to select : Dynamic, Standard, Mild, Personal.
Contrast Press “ OK ” button to
enter Contrast, then press ◄/► buttons to
adjust the contrast of the picture.
Brightness Press “ OK ” button to
enter Brightness, then press ◄/► buttons
to
adjust the brightness of the picture.
Colour Press “ OK ” button to
enter Colour, then press
◄/►
buttons to
adjust the colour of the picture.
Sharpness Press “ OK ” button to
enter Sharpness, then press ◄/► buttons
to
adjust the sharpness of the picture.
Colour Temp Press “ OK ” button to
enter Colour Temp, then press ▲
/
▼ buttons
to
select: Cold, Normal, Warm.
Noise Reduction Press “ OK ” button to
enter Noise Reduction, then press ▲ / ▼ but-
tons to
select: off, low, middle, hight, default.
ON
PICTURE
Picture Mode Personal
Contrast 50
Move MENU Return OK Select EXIT Exit
Brightness 50
Colour 50
Tint 50
Sharpness 50
Colour Temp Normal
Noise Reduction Middle
8
press
3. Press ▲/▼ buttons on the remote control
to select the item you want to adjust.

Sound Adjustment
EXIT MENU OK
1. Press MENU button on the front panel or MENU button on the remote control
to display the main menu.
2. Press ◄/► buttons on the remote control to select the Sound menu,then
OK or ▼ buttons for the submenu.
4. Press OK button on the remote control and press
▲ / ▼ ◄/► buttons to
change the status.
5. Press MENU button to go to the previous menu.
Sub windows info:
Sound Mode Press “ OK ” button to
enter Sound Mode, then press ▲
/
▼
buttons to select : Standard, Music, Movie, Sports, Personal.
Treble Press “ OK ” button to
enter Treble, then press
◄/►
buttons to
adjust the high frequency content of audio output.
Bass Press “ OK ” button to
enter Bass, then press ◄/► buttons to
adjust the low frequency content of audio output.
Balance Press “ OK ” button to
enter Balance, then press ◄/► buttons
to
adjust the audio output between left and right speakers.
Auto Volume Press “ OK ” button to a
djust audio to the best volume auto-
matically.
SPDIF Mode Press “ OK ” button to a
djust SPDIF mode: PCM, Auto, Off.
Move MENU Return OK Select EXIT Exit
SOUND
Sound Mode Personal
Treble 50
Bass 50
Balance 0
AD Switch Off
Auto Volume Off
SPDIF Mode Auto
9
press
3. Press ▲/▼ buttons on the remote control
to select the item you want to adjust.

Time Adjustment
EXIT MENU OK
1. Press MENU button on the front panel or MENU button on the remote control
to display the main menu.
2. Press ◄/► buttons on the remote control to select the Time menu, then press
OK or ▼ buttons for the submenu.
4. Press OK button on the remote control and press
▲
/
▼
◄/► buttons to
change the status.
5. Press MENU button to go to the previous menu.
Sub windows info:
Sleep Timer
Clock
Time Zone
Display the time.
Allows you to select time zone.
Press “ OK ” button to enter Sleep Timer, then press ▲ / ▼
buttons to set sleep timer : off, 10min, 20min, 30min, 60min,
90min,120min, 180min, 240min.
Auto Standby Press “ OK ” button to
enter Auto Standby, then press ▲
/
▼ but-
tons to set auto standby : off, 3H, 4H, 5H.
OSD Timer
Press “ OK ” button to
enter OSD Timer, then press ▲
/
▼ but-
tons to set OSD timer : 5s, 10s, 15s, 20s, 25s, 30s.
TIME
Move MENU Return OK Select EXIT Exit
Sleep Timer Off
Auto Standby 4H
Time Zone GMT +10
Clock -- -- --
OSD Timer 15s
10

3. Press ▲/▼ buttons on the remote control
to select the item you want to adjust.

Lock Adjustment
EXIT MENU OK
1. Press MENU button on the front panel or MENU button on the remote control
to display the main menu.
2. Press ◄/► buttons on the remote control to select the Lock menu, then press
OK or
▼ buttons for the
submenu.
4. Press OK button on the remote control and press
▲
/
▼
◄/► buttons to
change the status.
5. Press MENU button to go to the previous menu.
Sub windows info:
Lock System Press “ OK ” button
and press default password “0000”
to
enter
Lock System.
Set Password Press “ OK ” button to
enter, then you can reset new password.
Block Program
Press “ OK ” button to enter Block Program, then press ▲
/
▼
buttons to select the channel you want to lock,then press the
green button to lock channel.
Key Lock
Press “ OK ” button to
select turn on or turn off Key Lock.
LOCK
•••••••••
Move MENU Return OK Select EXIT Exit
Lock System Off
Set Password
Block Program
Parental Guidance Off
Key Lock Off
Hotel Mode
11
3. Press ▲/▼ buttons on the remote control
to select the item you want to adjust.

First Time
(only available in TV mode)
Setup Adjustment
EXIT MENU OK
1. Press MENU button on the front panel or MENU button on the remote control
to display the main menu.
2. Press ◄/► buttons on the remote control panel to select the Setup menu,
OK or
▼ buttons for the
submenu.
4. Press OK button on the remote control and press
▲
/
▼
◄/► buttons to
change the status.
5. Press MENU button to go to the previous menu.
Sub windows info:
SETUP
Move MENU Return OK Select EXIT Exit
OSD Language English
TT Language Farsi
Audio Languages Danske
Subtitle Languages Danske
Hearing Impaired Off
PVR File System
Aspect Ratio 16:9
Blue Screen Off
First Time Installation Off
Reset
Software Update (USB)
12
OSD Language Press “ OK ” button to
enter OSD Language, then press ▲
/
▼
◄/► buttons to select OSD Language.
TT Language Press “ OK ” button to enter TT Language, then press ▲ / ▼ but-
tons to select TT Language.
Aspect Ratio
Press “ OK ” button to enter Aspect Ratio, then press ▲
/ ▼ but-
tons to select different ratios: auto, 4:3, 16:9, zoom1, zoom2.
Blue Screen
Press “ OK ” button to select off or on.
Installation
Reset
Software Update
(USB)
Using the USB device to update software.
Press “ OK ” button to set relevant options including OSD
language, country and tuning.
Reset to default setting.
then press
3. Press ▲/▼ buttons on the remote control
to select the item you want to adjust.


Sub windows info:
13
PHOTO
MUSIC
MOVIE
TEXT
Media OPERATION
USB2.0
PHOTO MUSIC MOVIE TEXT
Note:Before operating Media menu,Plug in USB device,then press INPUT button
to set the Input Source to Mdeia.
1.Press / button to select Media in the Source menu, then press OK
button to enter.
2.Press / button to select the option you want to adjust in the main menu,then
press OK button to enter.







Press / button to select PHOTO in the main menu,
then press OK button to enter.
Select the file you want to watch.
Press menu button to return back to the previous menu
and Exit button to quit.
Press / button to select MUSIC in the main menu,
then press OK button to enter.
Select the file you want to watch.
Press menu button to return back to the previous menu
and Exit button to quit.


Press / button to select MOVIE in the main menu,
then press OK button to enter.
Select the file you want to watch.
Press menu button to return back to the previous menu
and Exit button to quit.


Press / button to select TEXT in the main menu,
then press OK button to enter.
Select the file you want to watch.
Press menu button to return back to the previous menu
and Exit button to quit.

14
RECORD
N ote:You should insert the mobile disc or USB before you start to record.
Press the REC button on your remote control .
1. Press Play button to record the current program.
Press Stop to stop recording.
2.Press Stop button to stop recording ,the it will return to normal broadcast television.
3.When the storage space of Disk is shortage. Tt will produce a warning message, then
it stops recording automatically and return to normal broadcast television.
4.Press index button to see the information of the recorded list .
Press Info button to see the detail of the program.
It will stop PVR.

DVD Functions
15
Information Funtions
Information Display
Support formats
DVD support DVD / CD-DA / JPEG formats.
An On Screen Display (OSD) indicator will be displayed at the upper
part TV screenwhen certain functions are executed, or when pressing
the OSD button on the remote control.
The OSD indicator is a user friendly interface designed to display the
status of playback type. When a different disc is loaded (DVD, CD, Music
ready); the OSD indicator bar will be different.
DVD Player Functions
Close/Open
To open and close the disc tray. Press OPEN button on the remote.
Play
Pause
Stop
Press Stop button to stop .
Next Chapter, Track or File
Press this button skip advance DVD chapter or CD track.
Press this button skip backward DVD chapter or CD track.
Rep
PressREP button repeatedly to select the repeat mode.
DVD Menu
While playing a DVD, press the D.MENU button return to the DVD disc menu.
Title
While playing a DVD, press the
TITLE button return to the DVD disc title menu.
Audio Track
While playback a DVD disc, press AUDIO button repeatedly to select the desired
Angle
While playback a DVD disc, press ANGLE button repeatedly to select the desired
Press Play button to play the disc.
Press Pause button to pause (still picture).Press Play button to continue the playback
of the content.
camera angle.
audio sound track.