Panasonic PT-VX400NTU User manual

High Brightness and Advanced
Eco Performance in a Compact Body.
Wireless Projection for Smarter
Presentations.*
* Wireless projection: PT-VX400NT only.
PT-VW330 Series
PT-VW330
PT-VX400NT
PT-VX400
LCD Projectors

* Weight by model: PT-VX400NT: approx. 3.6 kg (7.9 lb), PT-VW330/VX400: approx. 3.5 kg (7.7 lb).
** This is the maximum value when the lamp power is set to Eco1 or Eco2, with the lamp turned on for 2 hours and off for 0.25 hour. Increases in the lamp on cycle or extended use with the lamp continuously
turned on will shorten the lamp replacement cycle. When the lamp power is set to Normal, the lamp replacement cycle is 3,000 hours. The usage environment affects the lamp replacement cycle.
*** With the lamp power set to Eco1 or Eco2. The usage environment affects the duration of the filter.
* Featured image: PT-VX400NT
The PT-VW330 Series portable projectors offer high
brightness in a compact body, weighing 3.6 kg (7.9 lb) or
less.* These models feature a wide range of functions that
greatly reduce the hassle and cost of maintenance, such as a
lamp replacement cycle of up to 5,000 hours** and an air
filter replacement cycle of up to 6,000 hours.***
A newly developed intelligent lamp control system effectively
reduces power consumption. Plus, the Easy Setting function
and wireless LAN featured in the PT-VX400NT model simplify
setup and optimize presentations. These advanced models
provide powerful visual support with superb performance
while minimizing environmental impact.
Superb
Performance
High brightness and contrast are achieved
in a lightweight, compact body. The
projectors are easy to carry around, and
provide bright, clear images in a wide
variety of situations.
Ecological
Performance
Starting with an intelligent lamp control
system that effectively reduces power
consumption, a highly advanced ecological
performance lowers running costs and
reduces the impact on the environment.
Convenient
Functions
A host of versatile functions support flexible
installation and setup. And the PT-VX400NT
also allows wireless projection from a
personal computer or iOS device to further
expand presentation possibilities.
Enhanced Performance in a Compact, Lightweight Body.
Advanced Eco Performance, Easy Setting and Wireless Projection
Set a New Standard for Portable Projectors.

Large Medium Small
Metal mesh Urethane Hole punched (metal)
Dust
Input signal level DarkBright
Input signal level
Lamp outputLamp output
DarkBright
Up to
70%
Normal mode
Eco mode
NEW
A Full 4,000 lm/3,000 lm*2of Brightness and
2,000:1 Contrast
A remarkable 4,000 lm/3,000 lm*2of brightness and 2,000:1 contrast have
been achieved in a compact, easy-to-carry body, weighing only 3.6 kg (7.9 lb)
or less.*1Bright, clear images enhance a variety of viewing situations and
applications.
Intelligent Lamp Control System Reduces
Power Consumption
When the lamp power is set
to Auto, the intelligent lamp
control system automatically
adjusts the lamp output in
accordance with the brightness
of the projected image and
reduces it by up to 70%. It
also combines with color shift
correction, which corrects the
shift in the color balance that
occurs when the lamp output
drops. As a result, power
consumption is effectively
reduced while excellent color
reproduction is maintained.
Environmentally Friendly Standby Power
Consumption of Only 0.48 W*6
When the Standby mode is set to Eco, the standby power consumption is
low at 0.48 W.*6This lowers running costs, and helps to reduce environment
impact.
Displaying the Total Amount of Reduced
Power Consumption and CO2Emission
When the lamp power is set to
Eco1, Eco2 or Auto, you can display
the total amount of reduced power
consumption and decreased CO2
emission compared to when the
lamp power is set to Normal.
It can be shown by day, month
or year. Quantitatively checking
these reduction amounts helps to
increase the awareness of energy
saving and the environment.
A Maximum 5,000-Hour*3Lamp Replacement
Cycle and 6,000-Hour*4Air Filter Replacement
Cycle
These handy portables offer a lamp replacement cycle of up to 5,000
hours*3for extended, maintenance-free use. Three-layered air filters, in
which each layer contains a different mesh size, are installed in two parts
of the body. Increasing the filters’ surface area made it possible to achieve a
replacement cycle of up to 6,000 hours.*4This reduces maintenance hassles
for long periods of use, and helps to lower maintenance costs and reduce
environmental impact.
Superb Performance
in a Compact, 3.6-kg (7.9-lb) Body*1
Versatile Eco Performance
Helps the Environment
Quiet 29-dB*5Design Does Not Interrupt
Meetings or Classes
The quiet design keeps noise levels down to 29 dB,*5so the sound of the
cooling fan is hardly noticeable. This helps the audience to keep their
attention on the speech when someone is giving a presentation or on the
screen images during quiet scenes.
3-Layer Air Filter
Bright scene Dark scene
Intelligent Lamp Control System
Conventional Lamp System
3,000 lm 4,000 lm 4,000 lmSide-by-Side/P-in-P Wireless FunctionWXGA XGA XGA
VW330 VX400NT VX400 VW330 VX400NT VX400
VW330 VX400NT VX400
VW330 VX400NT VX400
VW330 VX400NT VX400
VW330 VX400NT VX400
PT-VW330 PT-VX400NT PT-VX400
* Product numbers vary depending on the market. The product number in North America and Taiwan is PT-VW330U, VX400NTU and PT-VX400U. The product number in Europe (except UK) and CIS is
PT-VW330E, VX400NTE and PT-VX400E. The product number in UK, Asia (except Taiwan), Oceania, Middle East, and Africa is PT-VW330EA, VX400NTEA and PT-VX400EA.
Air Filter Unit
***
*1 Weight by model: PT-VX400NT: approx. 3.6 kg (7.9 lb), PT-VW330/VX400: approx. 3.5 kg (7.7 lb). *2 The PT-VX400NT/VX400 has 4,000 lm and the PT-VW330 has 3,000 lm of brightness. *3 This is the
maximum value when the lamp power is set to Eco1 or Eco2, with the lamp turned on for 2 hours and off for 0.25 hour. Increases in the lamp on cycle or extended use with the lamp continuously turned on will
shorten the lamp replacement cycle. When the lamp power is set to Normal, the lamp replacement cycle is 3,000 hours. The usage environment affects the lamp replacement cycle. *4 With the lamp power
set to Eco1 or Eco2. The usage environment affects the duration of the filter. *5 With the lamp power set to Eco1 or Eco2. *6 Standby mode: Eco. When the Standby mode is set to Eco, network functions such
as standby on via LAN are not available. Also, only certain commands can be received for external control using the serial terminal.

Easy Wireless Projection from Multiple PCs
The Wireless Manager ME5.5 application*7provided with the projector allows
easy transfer of data*8from the screen of a personal computer through a wired
or wireless*9LAN connection. It can be used to transfer audio*10 files. When a
wireless LAN connection is used, there is no need to connect a VGA cable
between the computer and projector; therefore, it allows easy and speedy
setup, and a flexible system layout. Screen images from multiple computers
can also be projected, and Multi-Live mode allows the simultaneous projection
of up to 16 computers.
1.6x Zoom Lens Allows Flexible Installation
When projecting onto a 100-inch wide screen, the 1.6x zooms lens lets the
PT-VW330, for example, support a wide range of projection distances, from
2.5 to 4.1 meters (8.2 to 13.5 feet).
Easy Setting Function for Even Easier Setup
When the Auto Setup button is pressed, a camera inside the projector detects
the condition of the projected image. In addition to Auto Input Signal Search and
Auto Setup, the projector then makes the following adjustments. This makes
setup even easier.
A Wide Variety of Functions for Easy Setup
• Auto Input Signal Search
The Auto Input Signal Search function automatically detects the input signal
and selects the input channel based on the signal. This function lets you start a
presentation without any complicated setup required.
• Input Guidance Function
If the input signal cannot be detected, the Input Guidance function will display
connection instructions on the projector screen, for easy setup.
• Real-Time Keystone Correction*13
With Real-Time Keystone Correction, the projector automatically senses if you
adjust its angle (in the vertical direction) during operation and instantly makes
whatever keystone correction is necessary for optimal viewing.
• Color-board and Blackboard modes
Color-board and Blackboard modes adjust the colors to make high-quality
projection possible in rooms that don’t have a screen.
Wireless Projection from iPad/iPhone
The “Panasonic Wireless Projector for iOS” application, which is free and
available on the App Store, allows wireless projection from an iPad, iPhone or
iPod touch. You can send PDF files transferred from a PC via iTunes to the
Documents*11 folder of this application, and JPEG images saved to the
Photos*11 folder of your iPad, iPhone or iPod touch. You can also project
websites with the built-in web browser, and photos taken with the built-in
camera iOS devices. Presentations can
be done using only the wireless
projector and an iPad, iPhone or iPod
touch. Various touch screen operations,
such as rotating the direction of the
screen, flicking to turn pages, and
pinching to zoom in or out, are possible.
For more information, please visit
http://panasonic.net/avc/projector/ios/
For more information about the Wireless Manager ME5.5 application, please visit
http://panasonic.net/avc/projector/products/vw330/
USB Display Function for Easy Projection
Using a USB Cable
By installing the Wireless Manager ME5.5 application in a personal computer in
advance and connecting*12 the USB ports on the projector and the computer
with a USB cable, Wireless Manager ME5.5 will automatically start up and
output computer images and sound from the projector. Multi-Live mode and
other functions can also be used in the same manner as when using a wireless
connection.
USB Memory Viewer for Projection
without a Personal Computer
JPG/BMP image files and text files stored
on a USB memory device can be projected
by simply inserting the USB memory device
into the USB port of the PT-VX400NT. This
makes it easy to give presentations without
having to use a computer.
VX400NT VW330 VX400NT VX400
VX400NT
VW330 VX400NT VX400
VX400NT
VX400NT
VX400NT
*7 This application is supported by Windows®XP/ Windows Vista®/ Windows®7 and Macintosh OS (OS X Ver. 10.4/10.5/10.6/10.7). *8 DVD video, Blu-ray video and content set with DRM (Digital Rights
Management) cannot be transferred. *9 If the computer is not equipped with a wireless LAN function, a wireless LAN card is required. In the case of Macintosh computers, only the built-in wireless LAN
function is supported. Network functions such as Live mode and Multi-Live mode can also be used with a wired LAN. *10 Windows®7/Vista®computers must be logged on to using the Administrator’s
account. The first time that a Windows®7 computer is used, the sound driver may require setting. *11 Files that are saved anywhere other than these locations cannot be projected. Also, PDF files that
contain animation, links, have open passwords, or have been scanned at high resolution cannot be sent. *12 The first time a USB cable is connected, a USB driver must be installed. *13 Keystone correction
is performed in the PT-VX400NT when using the Easy Setting function. *14 If the screen border cannot be detected, the projection screen size adjustment is not made. In this case, only the horizontal/vertical
Keystone correction is done.
Convenient Functions for Portable and Ceiling-Mounted Applications
Four-Window Multi Style
displays up to four
computer screens at a time.
Four-Window Index Style
displays thumbnails of four
computer screens.
16-Window Index Style
displays thumbnails of
16 computer screens.
• Screen Fitting
The projection screen size and horizontal/vertical Keystone correction
(trapezoidal correction) are automatically adjusted to fit the screen.*14
• Focus Assist
A focusing guide is displayed to help the focus adjustment.
• Wall Color Compensation
When projecting onto a colored wall, blackboard, or other similar surface, the
white balance is automatically adjusted.

10-Watt Speakers and a Microphone Input
Enables Audio Playback Directly from the
Projector
These portable projectors feature
high-output 10-watt speakers that
produce a high sound volume
without requiring external
speakers. They also feature a
microphone input terminal that
allows microphone sounds to
be output from the projector.
These features make
presentations even more
effective.
Top-Panel Lamp Replacement
Simplifies Maintenance
The lamp can be reached through the
top panel for easy replacement. This
eliminates the need to detach the
projector from its ceiling bracket and
greatly simplifies maintenance.
Direct Power Off Function - Unplug the Power
Cord Immediately After Use
The Direct Power Off function keeps the
cooling fan turned on even when you
unplug the power cord right after use.
This lets you put everything away and
carry the projector quickly to your next
presentation or lecture.
Convenient Carrying Bag
A carrying bag with a handy shoulder strap comes
with the projector. This bag helps protect the
projector from impacts.
HDMI Input Terminal and Abundant Interfaces
Extensive interfaces include an HDMI input terminal, 2 sets of computer (RGB)
input terminals, a wired LAN terminal, and a serial (RS-232C) terminal for
external control. These features support a wide range of system architectures
for portable or ceiling-mounted use.
Easy Remote Monitoring and Control over a LAN
A web browser on a computer connected through a wired LAN*15 system lets
you remotely operate projectors and check their status. An e-mail messaging
function can also notify you when a lamp needs replacement, and indicate the
overall projector status. In addition, Multi Projector Monitoring and Control
Software is available for monitoring and controlling multiple Panasonic
projectors from a single PC. The wired LAN terminal is compatible with PJLink™
(class1), an open protocol that is used by many manufacturers, to enable
integrated control of systems that contain different brands of projectors.
Side-by-Side and P-in-P Function*16 (PT-VW330)
for Effective Presentations and Lectures
Two different image sources can be simultaneously displayed onto a single
screen. You can also switch to P-in-P (Picture-in-Picture) mode and display a
sub-window onto the main screen. The sub-window can be positioned at any of
the four corners (upper left, upper right, lower left, lower right) to expand the
usable area as only a wide-screen projector can do.
Side-by-Side Mode P-in-P Mode
Basic concept of
the Multi Projector
Monitoring and
Control Software Effective theft prevention with the startup logo*• 17
Projector identification system for remote control allocation of up to six•
projectors
The Wireless Mouse function (PT-VX400NT only) enables you to operate a•
computer’s mouse pointer by the projector’s wireless remote control
Built-in closed caption decoder•
Other Features
Auditorium
Lecture room
Seminar room
Classroom
VW330 VX400NT VX400
VW330
VW330 VX400NT VX400
VW330 VX400NT VX400
VW330 VX400NT VX400
VW330 VX400NT VX400
VW330 VX400NT VX400
*15 The PT-VX400NT also supports a wireless LAN system. *16 This function is not effective for some source combinations. *17 The included Logo Transfer Software is required to upload a new logo.
*18 Standby mode: Eco. When Standby mode is set to Eco, network functions such as standby on via LAN are not available. Also, only certain commands can be received for external control using the serial terminal.
* Featured image: PT-VX400NT.
* The PT-VW300/VX400 are not equipped with USB A/USB B terminals.
No halogenated flame retardants are used in the cabinet.•
Lead-free glass is used for the lens.•
Lamp power switching further reduces power consumption.•
Standby power consumption of only 0.48 W*• 18 has been achieved.
RoHS compliant•
Ecology-Conscious Design

350 (13-3/4) 277 (10-7/8)
97 (3-7/8)
Lower edge of projected image
Upper edge of projected image
L
Projected image
L
H
H
Replacement lamp unit
ET-LAV100
Replacement filter unit
ET-RFV100
Ceiling mount
bracket for
high ceilings*¹⁰
ET-PKV100H
Ceiling mount bracket
for low ceilings*¹⁰
ET-PKV100S
Bracket assembly
ET-PKV100B
Model PT-VW330 PT-VX400NT PT-VX400
Power supply 100-240 V AC, 50/60 Hz
Power consumption
322 W (0.48 W when standby mode
set to Eco*¹, 12.5 W when standby
mode set to Network.)
322 W (0.48 W when standby mode
set to Eco*¹, 14.5 W when standby
mode set to Network.)
322 W(0.48 W when standby mode
set to Eco*¹, 10.0 W when standby
mode set to Network.)
LCD panel
Panel size 15 mm (0.59 inches)
diagonal (16:10 aspect ratio) 16 mm (0.63 inches) diagonal (4:3 aspect ratio)
Display method Transparent LCD panel (x 3, R/G/B)
Pixels 1,024,000 (1,280 × 800) x 3,
total of 3,072,000 pixels 786,432 (1,024 × 768) x 3, total of 2,359,296 pixels
Lens 1.6x manual zoom (throw ratio: 1.2–1.9:1), manual focus, F 1.65–2.33, f 15.47–24.53 mm
Lamp 245 W × 1, lamp replacement cycle (lamp power: Normal/Eco1, Eco2): 3,000 hours/5,000 hours*²
Screen size (diagonal) 0.76–7.62 m (30–300 inch)
Brightness*³ 3,000 lm (lamp power: Auto/Normal) 4,000 lm (lamp power: Auto/Normal)
Center-to-corner uniformity*³ 85%
Contrast*³ 2,000:1 (full on/full off, lamp power: Auto)
Resolution 1,280 × 800 pixels*⁴ 1,024 × 768 pixels*⁵
Scanning
frequency
HDMI fH: 25–80 kHz, fV: 50–85 Hz, dot clock: 162 MHz or lower
RGB (analog) fH: 15–100 kHz, fV: 50–100 Hz, dot clock: 140 MHz or lower
(Signals exceeding the dot clock rate of 140 MHz are downsampled.)
YPBPR(YCBCR)
fH: 15.75 kHz, fV: 60 Hz [480i(525i)]
fH: 31.50 kHz, fV: 60 Hz [480p(525p)]
fH: 45.00 kHz, fV: 60 Hz [720(750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1080(1125)/60i]
fH: 15.63 kHz, fV: 50 Hz [576i(625i)]
fH: 31.25 kHz, fV: 50 Hz [576p(625p)]
fH: 37.50 kHz, fV: 50 Hz [720(750)/50p]
fH: 28.13 kHz, fV: 50 Hz [1080(1125)/50i]
Video/S-Video fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift 49:1 9:1
Keystone correction range Vertical: ±30°
(±20° when Real-Time Keystone)
Vertical: ±40°, Horizontal: ±30°
(Vertical: ±30°, Horizontal: ±20° when
Auto Keystone)
Vertical: ±30°
(±20° when Real-Time Keystone)
Installation Ceiling/floor, front/rear
Terminals
HDMI IN
HDMI 19-pin x 1 (compatible with HDCP)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p, VGA (640 x 480)-WUXGA (1,920 x 1,200)*⁶,
compatible with non-interlaced signals only, dot clock: 25 -146.25 MHz
COMPUTER IN 1 D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCRx 1)
COMPUTER IN 2 /
MONITOR OUT
D-sub HD 15-pin (female) x 1 (RGB×1), (input/output selectable using on-screen menu)
(When Monitor Out is selected, the COMPUTER IN 1 signal is output.)
VIDEO IN RCA pin × 1 (Composite VIDEO)
S-VIDEO IN Mini DIN 4-pin × 1 (S-VIDEO)
AUDIO IN RCA pin x 2 (L-R x 1) for VIDEO/S-VIDEO input
COMPUTER AUDIO IN 1 M3 x 1 (L-R x 1)
COMPUTER AUDIO IN 2
(MIC IN) M3 x 1 (L-R x 1) for audio input or for microphone connection (variable)
AUDIO OUT M3 x 1 (L-R x 1) for output (variable)
SERIAL IN D-sub 9-pin (male) × 1 for external control (RS-232C compliant)
LAN RJ-45 × 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™ (class 1))
USB A —USB type-A (for the USB Memory
Viewer) x 1 —
USB B —USB type-B (for the USB Display/
Wireless Mouse) x 1 —
Built-in speaker 3.7 cm round shape × 1, output power: 10.0 W (monaural)
Noise level 35 dB (lamp power: Normal), 29 dB (lamp power: Eco1, Eco2)
Cabinet materials Molded plastic
Dimensions (W × H × D) 350 x 97 x 277 mm (13.8” x 3.8” x 10.9”) (with legs at shortest position, not including protruding parts)
Weight Approximately 3.5 kg (7.7 lbs) Approximately 3.6 kg (7.9 lbs) Approximately 3.5 kg (7.7 lbs)
Operating environment Operating temperature: 5°C–35°C (41°F–95°F), operating humidity: 20%-80% (no condensation)
Wireless
Standard — IEEE802.11b/g/n —
Infrastructure mode —
WPA-PSK (TKIP/AES), WPA2-PSK
(TKIP/AES), 128 bit/64 bit WEP,
WPA-EAP/WPA2-EAP
(PEAP[MS-CHAPv2/GTC],
EAP-FAST [MS-CHAPv2/GTC],
EAP-TTLS[MD5/MS-CHAPv2])
—
Ad-hoc mode*⁷ — 128 bit/64 bit WEP —
Supplied accessories
Power cord x 1*⁸, wireless remote control unit, batteries (AAA/R03/LR03 type × 2),
carrying bag x 1, RGB cable x 1, filter cover
Software CD-ROM (Logo Transfer Software,
Multi Projector Monitoring &
Control Software)
Software CD-ROM (Logo Transfer Software,
Multi Projector Monitoring & Control
Software, Wireless Manager ME 5.5)
Software CD-ROM (Logo Transfer Software,
Multi Projector Monitoring &
Control Software)
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Product availability differs depending on region and country. This product may be subject to export control regulations.
The projection distances and throw ratios given in this brochure are for use only as guidelines. For more detailed information, please
consult the dealer from whom you are purchasing the product. The PJLink trademark is an application trademark in Japan, the
United States, and other countries and regions or registered trademarks. All other trademarks are the property of their respective
trademark owners. Projection images simulated.
© 2011 Panasonic Corporation. All rights reserved. PT-VW330G2 Printed in Japan.
All information included here is valid as of December 2011.
Diagonal
image size
Projection distance (L) Height from the
edge of screen to
center of lens (H)
min.(wide) max.(tele)
0.76 [30"] 0.7 (2.3) 1.2 (3.9) 0.01 (0.03)
1.02 [40"] 1.0 (3.3) 1.6 (5.2) 0.01 (0.03)
1.27 [50"] 1.3 (4.3) 2.0 (6.6) 0.01 (0.03)
1.52 [60"] 1.5 (4.9) 2.5 (8.2) 0.02 (0.07)
1.78 [70"] 1.8 (5.9) 2.9 (9.5) 0.02 (0.07)
2.03 [80"] 2.0 (6.6) 3.3 (10.8) 0.02 (0.07)
2.29 [90"] 2.3 (7.5) 3.7 (12.1) 0.02 (0.07)
2.54 [100"] 2.5 (8.2) 4.1 (13.5) 0.03 (0.1)
3.05 [120"] 3.1 (10.2) 4.9 (16.1) 0.03 (0.1)
3.81 [150"] 3.8 (12.5) 6.2 (20.3) 0.04 (0.13)
5.08 [200”] 5.1 (16.7) 8.0 (26.2)*⁹ 0.05 (0.16)
6.35 [250"] 6.4 (21.0) 8.0 (26.2)*⁹ 0.07 (0.23)
7.62 [300"] 7.7 (25.3) 8.0 (26.2)*⁹ 0.08 (0.26)
PT-VW330
(16:10 aspect ratio; throw ratio: 1.2–1.9:1)
Diagonal
image size
Projection distance (L) Height from the
edge of screen to
center of lens (H)
min.(wide) max.(tele)
0.76 [30"] 0.7 (2.3) 1.1 (3.6) 0.05 (0.16)
1.02 [40"] 1.0 (3.0) 1.5 (4.9) 0.06 (0.2)
1.27 [50"] 1.2 (3.9) 1.9 (6.2) 0.08 (0.26)
1.52 [60"] 1.4 (4.6) 2.3 (7.5) 0.09 (0.3)
1.78 [70"] 1.7 (5.6) 2.7 (8.9) 0.11 (0.36)
2.03 [80"] 1.9 (6.2) 3.1 (10.2) 0.12 (0.39)
2.29 [90"] 2.2 (7.2) 3.5 (11.5) 0.14 (0.46)
2.54 [100"] 2.4 (7.9) 3.9 (12.8) 0.15 (0.49)
3.05 [120"] 2.9 (9.5) 4.7 (15.4) 0.18 (0.59)
3.81 [150"] 3.6 (11.8) 5.8 (19.0) 0.23 (0.75)
5.08 [200"] 4.8 (15.7) 7.8 (25.6) 0.31 (1.02)
6.35 [250"] 6.0 (19.7) 8.0 (26.2)*⁹ 0.38 (1.25)
7.62 [300"] 7.2 (23.6) 8.0 (26.2)*⁹ 0.46 (1.51)
PT-VX400NT/VX400
(4:3 aspect ratio; throw ratio: 1.2–1.9:1)
Projection distance unit: meters (feet)
Dimensions unit: mm (inch) Optional accessories
*1 When the Standby mode is set to Eco, network functions such as
standby on via LAN are not available. Also, only certain commands
can be received for external control using the serial terminal.
*2 The values given for the recommended lamp replacement cycles
are maximum. *3 Measurement, measuring conditions, and method
of notation all comply with ISO 21118 international standards.
*4 Input signals that exceed this resolution will be converted to
1,280 x 800 pixels. *5 Input signals that exceed this resolution will be
converted to 1,024 x 768 pixels. *6 Compliant with VESA CVT-RB.
*7 Not supported by IEEE802.11n. *8 Power cords available (x 2) for
the PT-VW330EA/VX400NTEA/VX400EA. *9 There is no guarantee of
the lens performance when the projection distance exceeds 8.0 m
(26.2 feet).
Specifications
*10 This product is used together with an optional bracket assembly (sold separately).
http://panasonic.net/avc/projector
For more information about Panasonic projectors
Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fire, malfunction or electric shock.
Caution
1 The projector uses a high-voltage mercury lamp under high internal pressure. This lamp may break, emitting a popping
sound, or fail to illuminate, due to impact or extended use.
2 The high-wattage lamp becomes very hot during operation. Please observe the following precautions:
• Never place objects on top of the projector while it is in operation.
• Make sure there is an unobstructed space of 1,000 mm (39-3/8 in) or more around the projector’s exhaust openings.
• If stacking projector units, care must be taken to provide the recommended space between units. These space
requirements also apply to installation where only one projector unit is operating at one time and the other unit is used
as a backup.
• If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must match the
operating temperature listed in the specifications table during use. Also, make sure the projector’s intake and exhaust
openings are not blocked. Ensure there is sufficient ventilation to prevent hot air from the exhaust openings being
recirculated into the intake opening.
3 The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
• The lamp replacement cycle varies greatly depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
4 Due to natural characteristics of lamps, screen brightness may fluctuate. This is not an indication of faulty lamp performance.
NOTE ON USE