PASGAO WAM-400 User manual

WAM-400
POWER
Receiver 4 Receiver 3 Receiver 2 Receiver 1
CHANN EL
1 2 3 4
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-20 -10 -5 -3 0 +3 +6 dB
OUTPUT LEVEL
DIPON
-10 10
5-5
0
-10 10
5-5
0
-10 10
5-5
0
WAM-400
Wireless Automatic Mixer
16 16 16 16
Wireless Automatic Mixer
User Guide

1
WAW-400 is specifically designed for large and medium-sized conference
room.The system integrates automatic sound mixer and four channels wireless
receiver in an IU case , and 3 frequency bands can work 6 systems without
disturbing each other . It is easy and fast to install for professional integration
projects
Specific model number:
Wireless microphone receiver: WAM-400
Conference transmitter: PDE-30W/PDE-40E(optional)
System Overview
9
Maintain a line of sight between transmitter and antenna.
Avoid placing the receiver near metal surfaces or any digital equipment (CD players, computers, etc.)
Keep the receiver from wall and over 1 m to the ground.
Transmitting devices such as cellular phones and two-way radio may interfere with wireless audio
transmission. Keep the transmitter and receiver away from this and other potential sources of interference.
Do not block any ventilation openings.
Place the system in dry and shady.
Do not repair by self-disassembly.
Keep the working place under -5°C-+50°C.
Please throw the used battery into recycling bins.
Important safty instructions
Troubleshooting
Issue Indicator Status Solution
Transmitter power light off
Turn transmitter on.
Make sure the +/- indicators on battery match the
transmitter terminals or change new batteries.
No sound or faint sound
Receiver power indicator off
Make sure AC adapter is securely plugged into
electrical outlet and into DC input connector on
rear panel of receiver.
Make sure AC electrical outlet works and is
supplying proper voltage.
Receiver RF indicator glows
Turn Receiver up.
Turn up Gain adjustment switch in transmitter.
Check the power connection of receiver and
Receiver RF indicator off
Transmitter indicator glows
Mover Receiver away from metal objects.
Check whether there is hamper between receiver
and transmitter.
Check the frequency of receiver and transmitter.
Change the batteries in transmitter
Distortion or unwanted Receiver display indicators
Remove nearby sources of RF interference (CD
players, computers, digital effects, etc.
Adjust transmitter Gain switch.
Change the batteries in transmitter.
Set maximum channel spacing when using
multiply systems.
Distortion increases Change the batteries in transmitter
amplifier or mixer.
noise bursts antenna activity
Transmitter LCD screen
displays battery level.When
in low battery,the icon will
flash or the low battery
indication turns red.
Transmitter LCD screen
displays battery level.When
in low battery,the icon will
flash or the low battery
indication turns red.
Applicability
WAM-400 is suitable for variety of occasions such as conference
rooms,studios,multi-media classrooms,broadcasts,courts and so on.

Catalogue
2
System components..................................................3
Receiver main functions............................................4
Wireless conference microphone...............................5
The installation of multiple receivers.........................7
Technical data...........................................................8
Tips for improving system performance......................9
Troubleshooting.........................................................10

3
System Module：
All system include:
PDE-30W wireless conference microphone
Wireless conference transmitter
includes(optional):
Receiver
8*AA size batteries
1*audio cable
Power module
1*antenna
2*rack mounts
User Guide
- -
+ +
- -
+ +
- -
+ +
- -
+ +
POWER
Receiver 4 Receiver 3 Receiver 2 Receiver 1
CHANNEL
1 2 3 4
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-20 -10 -5 -3 0 +3 +6dB
OUTPUT LEVEL
DIPON
WAM-400
Wireless Automatic Mixer
WAM - 400
Dimensions
44mmH*410mmW*280mmW
Weight
3400g
Power Requirement
DC 12-18V 1000mA
Technology index
Frequency range and transmitter output level
U A 600 -86 5 MHz 10-13dBm
The scope of work under typical conditions
40meter(120feet)
Note: Actual range depends on RF signal
absorption, reflection, and interference
Audio frequency response (+/-3db)
60Hz~16KHz
THD (+/- 30khz excursion, 1khz audio)
<1%
Dynamic range
>90db (A wh)
The work temperature range
Notes: Battery characteristics may affect
the scope of the limits.
-10 Cto+50 C
8
POWER
Receiver 4 Receiver 3 Receiver 2 Receiver 1
CHANNEL
1 2 3 4
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-20 -10 -5 -3 0 +3 +6dB
OUTPUT LEVEL
DIPON
-10 10
5-5
0
-10 10
5-5
0
-10 10
5-5
0
WAM-400
Wireless Automatic Mixer
16 16 16 16
Frequency range
600~900MHz
Maximum number of channels
16
Bandwidth
25MHz
Receiver sensitivity
<-90dBm for 30dB S/N Ratio
THD <0.8%
WIRELESS CONDENSER MIC
PDE-30W
WIRELESS CONDENSER MIC
PDE-30W
WIRELESS CONDENSER MIC
PDE-30W
WIRELESS CONDENSER MIC
PDE-30W
PDE-40W wireless conference microphone
Frequency range Scope Transmitter RF Frequency range
630-865MHZ
Adjustable channel number
16
Mode of oscillation
Phase-locked loop frequency synthesis (PLL)
Frequency Stability
±10PPM
Audio Input Level Maximum
0dBV
Modulation degree of distortion
≤0.8%
Dimensions
50mm H × 111mm W × 148mm D
Weight
580 grams without batteries
Power Requirement
Two “AA” size alkaline or rechargeable
batteries
Battery life
＞8 hours (Alkaline)
Frequency range
630-865MHZ
Adjustable channel number
16
Mode of oscillation
Phase-locked loop frequency synthesis (PLL)
Frequency Stability
±10PPM
Audio Input Level Maximum
0dBV
Modulation degree of distortion
≤1%
Dimensions
45mm H × 150mm W × 120mm D
Weight
800 grams without batteries
Power Requirement
Two “AA” size alkaline or rechargeable
batteries
Battery life
＞8 hours (Alkaline)
System PDE-30W Wireless Conference
Microphone
PDE-40W Wireless Conference
Microphone
WAM-400 Receiver
WIRELESS CONDENSER MIC
PDE-40W
WIRELESS CONDENSER MIC
PDE-40W
WIRELESS CONDENSER MIC
PDE-40W
WIRELESS CONDENSER MIC
PDE-40W

Receiver function:
Front panel
Back pannel
1
2
3
4
5
6
7
1
2
3
4
6
7
5
Lin k Inp ut Lin k Out put
UNB AL OU TPUT
AUX IN
ANT EN NA
GATE T HRE SHO LD
BAL O UTP UT
D.C 13.5 -18 V
100 0m A
1
23
4 5 6 7
1234567
47
8 9 10 11 12 13 14
15
8
9
10
11
12
13
14
15
POWER
Receiver 4 Receiver 3 Receiver 2 Receiver 1
CHAN NEL
1 2 3 4
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-20 -10 -5 -3 0 + 3 +6dB
OUTPUT LEVEL
DIPON
-10 10
5-5
0
-10 10
5-5
0
-10 10
5-5
0
WAM-40 0
Wireless Automatic Mixer
16 16 16 16
MID control knob
Treble control knob
AUX input volume knob
Master volume knob
Four receivers indication light
Priority switch
Output level indication light
POWER
Receiver 4 Receiver 3 Receiver 2 Receiver 1
CHANNEL
1 2 3 4
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-20 -10 -5 -3 0 +3 +6dB
OUTPUT LEVEL
DIPON
-10 10
5-5
0
-10 10
5-5
0
-10 10
5-5
0
WAM-400
Wireless Automatic Mixer
16 16 16 16
POWER
Receiver 4 Receiver 3 Receiver 2 Receiver 1
CHANNEL
1 2 3 4
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-20 -10 -5 -3 0 +3 +6dB
OUTPUT LEVEL
DIPON
-10 10
5-5
0
-10 10
5-5
0
-10 10
5-5
0
WAM-400
Wireless Automatic Mixer
16 16 16 16
POWER
Receiver 4 Receiver 3 Receiver 2 Receiver 1
CHANNEL
1 2 3 4
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-20 -10 -5 -3 0 +3 +6dB
OUTPUT LEVEL
DIPON
-10 10
5-5
0
-10 10
5-5
0
-10 10
5-5
0
WAM-400
Wireless Automatic Mixer
16 16 16 16
POWER
Receiver 4 Receiver 3 Receiver 2 Receiver 1
CHANNEL
1 2 3 4
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-20 -10 -5 -3 0 +3 +6dB
OUTPUT LEVEL
DIPON
-10 10
5-5
0
-10 10
5-5
0
-10 10
5-5
0
WAM-400
Wireless Automatic Mixer
16 16 16 16
POWER
Receiver 4 Receiver 3 Receiver 2 Receiver 1
CHANNEL
1 2 3 4
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-30 -20
10 20 30 40
-10 0 3
dBu
50
-20 -10 -5 -3 0 +3 +6dB
OUTPUT LEVEL
DIPON
-10 10
5-5
0
-10 10
5-5
0
-10 10
5-5
0
WAM-400
Wireless Automatic Mixer
16 16 16 16
The installation of multiple receivers
1* BNC cable (optional)
1* BNC connector (optional)
Antenna distributor(optional)
Rack
Four receivers
One Receiver (with Rack)
POWER
UHF ANTENNA DISTRIBUTE IMPLEMENT
PA-828U
ANTENNA-B
ANT-1 ANT-1 ANT-2 ANT-2 ANT-3 ANT-3 ANT-4 ANT-4 ANTENNA-A
D.C.12-18V IN
200mA
+
-
Link In put Link Out put
UNBAL OU TPU T
AUX IN
ANTEN NA
GATE THR ESHO LD
BAL OUTP UT
D.C 13. 5-18 V
1000mA
Link In put Link Out put
UNBAL OU TPU T
AUX IN
ANTEN NA
GATE THR ESHO LD
BAL OUTP UT
D.C 13. 5-18 V
1000mA
Link In put Link Out put
UNBAL OU TPU T
AUX IN
ANTEN NA
GATE THR ESHO LD
BAL OUTP UT
D.C 13. 5-18 V
1000mA
Link In put Link Out put
UNBAL OU TPU T
AUX IN
ANTEN NA
GATE THR ESHO LD
BAL OUTP UT
D.C 13. 5-18 V
1000mA
One receiver
(With rack mounts)
6* BNC cable (optional)
2* BNC connector (optional)
Power switch
RF indication light
AF control knob
AF indication light
Channel up
Channel down
LCD screen:
shows current using frequency
BASS control knob
Extra IN and Extra OUT
Balanced output socket
AUX output socket
(To link with unbalanced input device)
Unbalanced input socket
(To link with AUX, such as background music)
Speech ON value
AC adapter socket
Antenna socket

PDE-30W Conference transmitter:
Features：
1
2
3
4
5
6
Changing Batteries:
The microphone discreteness
Power indicator light
Gooseneck
Channel selection switch
Power switch
Low battery indication light
PDE-40W Conference transmitter:
5 6
+
-
+
-
3
4
5
2
1
6
WIRELESS CONDENSER MIC
PDE-40W
1
2
3
5
4
6
7
+
-
+
-
Changing Batteries:
1
2
3
4
5
6
Features：
7
PDE-40W Brief introduction
As the power indication light glows dark,
the battery should be changed immediately.
Expected life for two alkaline batteries is about 8 hours.
As the power indication light glows dark,
the battery should be changed immediately.
Expected life for two alkaline batteries is about 8 hours.
To improve the application of the system, the LCD of PDE-40 can
display the current using frequency with simple installation and setup.
Microphone cartridge
Power indication light
Gooseneck
LCD screen
(Shows the current using frequency)
Flash red light in low battery
Power switch
Channel down
Channel up
(16 frequencies selectable in a
frequency band)