Ethernet configuration
Et ernet connect will automatically connect to network and w en you insert RJ45 connecter.
You can Configure Et ernet connections for static IP, or DHCP etc,
To unc eck option to Turn Off Et ernet automatic connection
T e internet connection will use Et ernet w en Wi-Fi is Turn On.
WLAN connection
Wi-Fi can only be used w en it connects wit ome Wi-Fi Access Point (AP) or a free unsecured
Wi-Fi otpot. Under “Wireless & networks”, tap “Wi-Fi” to turn it on. After a moment, your
Wi-Fi network list s ould populate. If you need to rescan for available networks, tap "scan"
•Turn on WLAN
Tap “Settings” → t en “Wireless & networks” → “Wi-Fi”to turn on Wi-Fi. Your
Peloton console lists t e networks it finds wit in range. Tap a network to connect. If
necessary, enter Network SSID, Security, and Wireless password, and tap “Connect”. W en
your Peloton console is connected to t e network, t e wireless indicator appears in t e status
bar. Waves indicate connection strengt .
BT connection
•Make device discoverable:
You must pair your Peloton console wit a device before you can connect to it. Once you pair
your Peloton console wit a device, t ey stay paired unless you unpair t em. Under “Settings”,
c oose “Bluetoot ”. Tap Bluetoot to turn on it and tap “Searc for devices”. T e Bluetoot
indicator t en appears in t e status bar.
•Scan for devices
After scanning, t ere will be a list of t e IDs of all available Bluetoot devices in range. If t e
device you want to pair wit isn’t in t e list, ensure t at t e ot er device is turned on and set to
be discoverable.
•Pair ith the Bluetooth device
