Percussion Play Surface Fixed Marimba User manual

Surface Fixed
1.1
1.2
1.3
1. Assemble frame and notes
as shown in images 1.2, 1.3
and 1.4(see Assembly Guide).
Ground Surface
750mm
Installation Instructions
Surface Fix
Components: 42 Kg
Pair Large Red
Beaters X2
Install Instrument
with 1.5m free space
(from widest point)
around it.
1.5m
1.5m
1.5m
1.5m
Marimba
Page 1 of 2
Weight of heaviest part 15kg (Notes)
BS EN 1176
Metric
Conversion:
250mm/ 10”
300mm/ 12”
400mm/ 16”
750mm/ 30”
1.5m/ 59”
Instrument
Components:
x2
M8 Barrel Nut
x4
M6x20 Security Screw
x4
M6 Saddle Strap
x4
M8x60 Security Screw
2 Part Cover Cap
x8
x4
M8x60 Security Screw
Ground Anchors
not supplied
2. Attach Surface Fixing Plates
to base of each leg using
fixings provided (See Surface
Fix Post Installation Sheet).
4. Fix to Surface using
recommended ground
anchors not supplied.
3.Locate Instrument in
desired location and mark
holes to fix to desired surface.
5. Make sure all fixings are
covered and secure using
cover caps provided.
6. Beaters can be fixed to
frame with fixings provided
1.5.
1.4
1.5
Spares available from
percussionplay.com or from your
local distributor
M8 Square Nut
x4

COMPONENTS LIST:
M8x60 Pin torx X8
M8 Barrel Nut Pin torx X4
PPMARI FRONT
PPMARI SIDE
M8 Square nut X4
Saddle Strap X2
M6x20 Pin torx X4
2 Part black cap X8
Surface Fixed
Instrument
Components:
M8x60 Security Screw
x2
M8 Barrel Nut
x4
Assembly Guide PPMARI
42 Kg
Pair Large Red
Beaters X2
Marimba
Page 2 of 2
TX 40 Driver Bit
x1
TX 30 Driver Bit
x1
Tools:
BS EN 1176
Thread Lock Solution
Required (Not Supplied)
Thread Lock Solution
Required (No Supplied)
M6x20 Security Screw
x4
M6 Saddle Strap
x4
Surface Fix
Components:
2 Part Cover Cap
x8
x4
M8x60 Security Screw
Ground Anchors
not supplied
Spares available from
percussionplay.com or from your
local distributor
M8 Square Nut
Thread Lock Solution
Required (Not Supplied)
x4