Perla Barb PBCS001 User manual

In order to achieve the best performance of your product, please read this ins arefully
before using, and keep it for future reference.
DEAR CUSTOMER
INSTRUCTION MANUAL
2 STROKE CHAIN SAW
Perla Barb 62cc Pro
Chainsaw V4 - PBCS001
Use 2-stroke multi mix fuel - 25:1 25ml
unleaded petrol to 1ml 2-stroke oil

SAFETY FIRST
Instructions contained in warnings within this
manual marked with a symbol concern critical
points which must be taken into consideration to
prevent possible serious bodily injury, and for this
reason you are requested to read all such
instructions carefully and follow them without fail.
■WARNINGS IN THE MANUAL
WARNING
This mark indicates instructions which must be
followed in order to prevent accidents which could
lead to serious bodily injury or death.
IMPORTANT
This mark indicates instructions which must be
followed, or it leads to mechanical failure, breakdown,
or damage.
NOTE
This mark indicates hints or directions useful in the
use of the product.
CONTENTS
1. Specifications ………………………………………………………………………….………………………………………………………………………3
2. Warning labels on the machine …………………………………….…………………………………………………………………………………4
3. Symbols on the machine …………………………………………………………………………………………………………………………………5
4. Safety precautions……………………………………………………………………………………………………………………………………………6
5. For safe operation ……………………………………………………………………………………………………………………………………………8
6. Installing guide bar and saw chain ………………………………………………………………………………………………………….…….12
7. Fuel and Chain Oil………………………………………………………………………………………………………………………………………13
8. Operating the Engine ……………………………………………………………………………………………………………………………………14
9. Sawing……………………………………………………………………………………………………………………………………………………………16
10. Maintenance …………………………………………………………………………………………………………………………………………………18
11. Troubleshooting guide……………………………………………………………………………………………………………………………………20
12. CE Declaration of Conformity…………………………………………………………………………………………………………………………21

Model no.
PBCS001
Engine type
1E48F(air-cooled, 2-stroke)
Equipment mobility
Hand-held
Engine displacement
62cc
Maximum engine power
2.85kw
Engine speed
10000 min-1
Engine idling speed
3000±300 min-1
Maximum chain speed
19.3 m/s
Spark plug
BOSCH L7T
Carburetor
Diaphragm type
Volume of fuel tank
550ml
Petrol and oil mix ratio
Petrol 25: oil 1
Volume of oil tank
260ml
Oil feeding system
Automatic pump with adjuster
Guide Bar
16", POH16-58WH
18", POH18-58WH
20", POH20-58WH
Saw Chain
16”, 66DL004 325 058 66DL
18”, 72DL004 325 058 72DL
20”, 76DL004 325 058 76DL
Chain pitch
0.325”
Chain gauge
0.058”
Sprocket
7 Teeth x 8.255 mm
Mass(without guide bar and chain and with empty tank)
6.5kg
Guaranteed sound power level, LWA (2000/14/EC)
LwA: 117 dB(A)
Tested sound pressure level, LPA (2000/14/EC)
LpA: 102 dB(A), k=3 dB(A)
Vibration at Front Handle
A front_hv, eq: 9.41 m/s2, k=1.5 m/s2
Vibration at Rear Handle
A rear_hv, eq: 8.80 m/s2, k=1.5 m/s2
Fuel consumption at max. engine power
1.18 kg/h
Note: Specifications are subject to change without notice.

2. Warning labels on the machine
-----------------------------------------------------------------------------------------------------------------
Read, understand and follow all
warnings.
Keep away from fire
Read the instruction manual
completely and carefully before
using the power tool.
Pull to start the engine
Wear head, eye and ear
protection.
The port to refuel the "MIX FUEL"
Warning! Danger of kickback.
The port to refuel the "OIL"
Use the chain saw with two
hands.
Press the primer bulb several
times
Wear safety footwear
Choke postion
Wear protective gloves.
The guaranteed noise level
With this symbol the
manufacturer confirms that this
tool is in accordance with
applicable European directives.
With this symbol the
manufacturer confirms that this
tool is in accordance with
applicable European directives.
IMPORTANT
If warning label peel off or become soiled and impossible to read, you should contact the dealer from which you
purchased the product to order new labels and affix them in the required location(s).
WARNING
Never modify your product. We won't warrant the machine, if you use the remodeled brush cutter or you don't
observe the proper usage written in the manual.

3. Symbols on the Machine
-----------------------------------------------------------------------------------------------------------------
WARNING
◆For safe operation and maintenance, symbols are carved in relief on the machine.
According to these indications, please be careful not to make any mistake.
The port to refuel “2 Stroke 25:1 Mix”
Position: Fuel cap
The port to top up chain oil
Position: Oil cap
Setting the switch to the “|” position, the engine starts.
Setting the switch to the “O” position, the engine stops immediately.
Position: Rear-left of the unit
Choke will close when pulling the choke knob.
Position: Choke knob
The screw under the “H” stamp is The High-speed adjustment screw.
The screw under the “L” stamp is The Slow-speed adjustment screw.
The screw at the left of the “T” stamp is the idle adjustment screw.
Position: Left side of the rear handle
Shows the directions that the chain brake is released (white arrow) and activated
(black arrow).
Position: Front of the chain cover