Philips 29PT9113 - annexe 1 User manual

1
Contents
Installation
Your remote control ________________________________________2
Preparation ________________________________________________3
Installation_________________________________________________4
Store TV channels
Select the menu language and country ______________________4
Automatic installation ___________________________________5
Manual installation ______________________________________5
Give name ________________________________________________6
Reshuffle the programme list _________________________________6
Select favourite TV channels __________________________________6
Install TV setup ____________________________________________7
The keys on top of the TV____________________________________8
Operation
Use of the remote control _________________________________9-10
Use of the menus
Picture menu __________________________________________11
Sound menu___________________________________________11
Features menu_________________________________________13
NEXTVIEW ________________________________________________15
PiP - Picture in Picture ______________________________________19
Teletext _______________________________________________20-21
Connect peripheral equipment_________________________22-27
Tips ____________________________________________________28
Index ___________________________________________________28
Lexicon _________________________________________________29
EasyLink features are based on the “one touch operation” approach. This means that
a sequence of actions are executed at the same time in both the television and the
video cassette recorder, provided both are fitted with the EasyLink function and
connected with the eurocable supplied.
English
English
3104 305 4724.5.gb 28-05-1999 10:09 Pagina 1

2
Your remote control
p. 9 Vvolume key
¬temporarily sound
switch off
p. 19 bPiP
p. 9 qpicture format
Smart Controls
p. 10 picture and
sound settings
p. 10 Xbilingual choice and sound info
jcontinuous subtitles p. 10
p. 20 bteletext on/off
Picture in Picture p. 19
- P+ channel selection of pip screen
cswitching screens
dstill picture
Bswitch to standby p. 9
ion screeninfo p. 9
0previous programme p. 9
Video recorder p. 25
‡stop
Òrewind
πplay
†wind
Cprogramme timer
®record
p. 10 Sfreeze the picture
Preduce image noise
fistrobe
spersonal preferences
Installation p. 4
sS
yÚ
Aselect your choice p. 11
OK activate your choice
Pprogramme selection p. 13
æNEXTVIEW on/off p. 15
yÚ
VCR 1
VCR 2
SAT
AMP
TUNER
TAPE
DCC
CD
TV
123
456
789
0
B
TV
M
u
P
¬
a
ZOOM
b
SMART
q
PICTURE
SOUND i0
TXT
cfh U
®
‡C
π†
Ò
Xj
+
-Pcd
SPfis
bæ
OK
p. 25 uselection of EXT1,EXT2,
EXT3 or FRONT
Mperipheral selection
TV TV selection
for future use
p. 11 PICTURE,SOUND, FEATURES menus,
programme list, surround mode selection
p. 15 NEXTVIEW selection
p. 20 direct txt page or subject selection
p. 20 Teletext
direct txt page or subject selection
dmix tv/txt picture - hold
henlarge
fsolution to riddles
Utime display/subpage selection
3104 305 4724.5.gb 28-05-1999 10:09 Pagina 2

3
Preparation
&Place the TV on a solid surface.
For ventilation, leave at least 5 cm free all around the TV.
To prevent any unsafe situations, do not place any objects on top of the TV.
éInsert the aerial plug tightly into the aerial socket xat the back of the TV.
You can improve the picture quality by using the suppressor aerial cable
supplied.
“Ensure the loudspeaker switch at the back of the TV is in the l position.
‘Connect the two Surround Sound rear loudspeakers supplied to the connector
clips at the back of the TV. Always connect both Surround Sound
loudspeakers: the left rear loudspeaker at REAR L; the right rear loudspeaker at
REAR R.
Push the connector clip down and insert the end of the wire into the opening: the
positive wire (the one with the black line) to the red loudspeaker connection; the
negative wire to the black loudspeaker connection. Do not insert the wires too far.
The Surround Sound loudspeakers should always be located behind or to either side of
the listener. If preferred you can also hang the loudspeakers on the wall.
(Insert the mains plug in the wall socket with a mains voltage of 220V-240V.
§Remote control: Remove the cover of the battery compartment.
Insert the 2 batteries supplied (Type R03G-1,5V).
Press the TV key next to the display to be sure your remote control is in the
TV mode.
The batteries supplied do not contain the heavy metals mercury and cadmium.
Nevertheless in many countries exhausted batteries may not be disposed of with your
household waste. Please ensure you dispose of exhausted batteries according to local
regulations.
èSwitch TV on: Press the power switch Aon the front of your TV.
A green indicator and the screen light up.
If the indicator is red, press the - P + key on the remote control.
The green lamp blinks every time you press a key on the remote control.
When you switch on your set for the first time, the menu LANGUAGE automatically
appears on the screen. Alternatively the explanation appears in the different
languages. Choose your own language and press the OK key on the remote control.
Go on to page 4.
FRONT
REAR
RL
,,
,,
,
,
,,,
,,,
,
,
CABLE
c
d
VCR 1
VCR 2
SAT
AMP
TUNER
TAPE
DCC
CD
TV
ZOOM
π
π
π
π
OK
M
u
TV B
+
VP
+
RO3 / AAA
3104 305 4724.5.gb 28-05-1999 10:09 Pagina 3

4
Store TV channels
Installation
Select the INSTALLATION MENU :
&Open the door of the remote control.
éPress Sand sat the same time.
To use the menus
&Use the Akeys to select a menu item.
éPress the OK key to activate.
“Use the red MENU key on the door of the remote control to return or to
switch menu off.
SOUND 0
i0
j
π†
ÒC
‡
X
P
Sfis
d
P+
-c
TXT dfh U
yÚ
If the TV is connected to a video recorder with the EasyLink function, the TV
automatically transfers the language and country selections to the video recorder.
After the new or extra TV channel(s) ha(ve)s been stored, the TV automatically
transfers that (those) TV channel(s) to the video recorder.
The message EasyLink : Downloading ...... appears on the screen.
The programme list of the video recorder is now equal to the one of the TV.
Select the menu language and country
First, you have to select your language and your country.
&Select the menu Language and press the OK key.
éSelect your language and press the OK key.
“Select Country and press the OK key.
‘Select the country where you are now located and press the OK key.
Select Other when none of the countries applies.
You can now search for and store the TV channels in two different ways: using
automatic installation or manual installation (tuning-in channel by
channel).
•Select your choice and press the OK key.
MENU TITLE
Menu language
Country
Automatic Installation
JINSTALLATION
MENU TITLE
United Kingdom
....
....
JCOUNTRY
MENU TITLE
English
....
....
JMENU LANGUAGE
MENU TITLE
Subject 1
Subject 2
Subject 3
JSubject 4
Subject 5
Subject 6
JSubject 4 L M
B
B
B
B
B
B
B
B
VCR 1
VCR 2
SAT
AMP
TUNER
TAPE
DCC
CD
TV
ZOOM
π
π
π
π
OK
M
u
TV
b
æ
q
b
B
123
456
789
PICTURE
SOUND
SMART
+
-
VP
+
-
¬
0
i0
activate
picture menu
sound menu
features menu
programme list
select adjustments
3104 305 4724.5.gb 28-05-1999 10:09 Pagina 4

Automatic installation
In the Automatic Installation menu select Start and press the OK key to
activate the searching. All TV channels are searched for and stored
automatically.
If a cable system which broadcasts ACI (Automatic Channel Installation) or a
TV channel transmitting a teletext page with the frequencies and programme
names of all the TV channels which can be received, is detected, the search is
stopped and a programme list appears.
The programme list is automatically filled with all the programme numbers and
names of the TV channels transmitted.
It is possible that the cable company or the TV channel displays a broadcast selection
menu. Layout and items are defined by the cable company or the TV channel.
Make your choice with the Akeys and press the OK key
To exit from the menu
•Press the red menu key on the door of the remote control.
Go on to page 6.
Manual installation
Searching for and storing TV channels is done channel by channel.
You must go through every step of the Manual Installation menu.
Selection Mode is only present and lights up if the country you selected also
offers the channel option (C-channels for aerial channels, S-channels for cable
channels).
You can choose either channel or frequency mode.
&Select the TV system
•Select the country or part of the world from where you want to receive the
TV channel.
If you are connected to a cable system, select your country.
éEnter the programme number with the digit keys.
“Search for a TV channel
The frequency or the channel number increases until a TV channel is found.
In case of poor reception, you can improve the reception by adjusting the
frequency with the - P + key.
Direct selection of a TV channel
If you know the frequency, or the C- or S-channel number, enter it directly
with the digit keys 0 to 9.
Ask for a list from your cable company or dealer, alternatively consult the
Table of frequencies on the inside backcover of this handbook.
‘ Store steps &till “
•Select Store and press the OK key.
Repeat every step to store another TV channel.
To exit from the menu :
•Press the red menu key on the door of the remote control.
5
Automatic Installation
Start
Stop
TV is searching
One moment please ...
JStop K
Automatic Installation
Start
Stop
1 BBC1
2 BBC2
3 CNN
....
....
JStart K
Manual Installation
(Selection Mode)
System
Programme No.
Search
Store
JSystem K
3104 305 4724.5.gb 28-05-1999 10:09 Pagina 5

6
According to your preference you can change the order of the stored TV
channels.
&Select Reshuffle in the INSTALLATION menu and press the OK key.
éSelect the programme number you want to change.
“Press the OK key.
‘Select the new number.
(Press the OK key.
Repeat the operation until all TV channels are allocated as you like.
§Press the red menu key to return to the INSTALLATION menu.
Reshuffle the programme list
Select Favourite TV channels
It is possible to change the name stored in the memory or to assign a name
to a TV channel which has not yet been entered. A name with up to 5 letters
or numbers can be given to the programme numbers 0 to 99. For example
SUPER, BBC1,... Between 99 and 0 you can also name any peripherals that are
connected.
&Select Give Name in the INSTALLATION menu and press the OK key.
éSelect the programme number.
“Press the OK key.
‘Select the character with the o or œkeys.
(Select the following position with the p or πkeys.
§Select the following character.
èPress the OK key when finished.
!Press the red menu key to return to the INSTALLATION menu.
A space, numbers or other special characters are located between Z and A.
Give name
After leaving the installation you can browse through the TV channels by
pressing the - P + key. Only those TV channels which are in the favourite list
will be displayed. The non-favourite TV channels can still be selected with the
digit keys.
&Select Favourite programmes in the INSTALLATION menu and press the
OK key.
éSelect your favourite programme number.
“Select Yes or No.
‘Repeat for every TV channel you want to change into a favourite or a non-
favourite TV channel.
(Press the red menu key to return to the INSTALLATION menu.
If the TV is connected to a video recorder with the EasyLink function, the TV
automatically transfers the reshuffled or modified TV channels to the video recorder.
The message EasyLink : Downloading Presets ... appears on the screen. The
programme list of the video recorder is equal again to the one of the TV.
In order to have the actual time displayed in the NEXTVIEW screen, the first TV
channel from the favourite list should also broadcast teletext.
INSTALLATION
Menu Language
Country
Automatic Installation
Manual Installation
Give Name
Reshuffle
Favourite Programmes
Connection diagrams
SETUP
JGive Name
Give Name
EXT1
EXT2
EXT3
FRONT
0
1 BBC1
2 BBC2
3 ....
4 ....
5 ....
J0
Reshuffle
EXT1
EXT2
EXT3
FRONT
0 BBC1
1 CNN
2 BBC2
3 ....
4 ....
5 ....
J1 CNN
Favourite Programmes
0 .... No
1 .... Yes
2 .... Yes
3 .... No
4 .... No
5 .... Yes
J2 .... Yes
3104 305 4724.5.gb 28-05-1999 10:09 Pagina 6

7
Connection diagrams
See Connect Peripheral Equipment, p. 22.
Install TV Setup
&Use the Akeys to select the menu item.
éUse the OK key to activate.
“Use the red menu key on the door of the remote control to return or switch
menu off.
CD-i / Photo CD
See Connect Peripheral Equipment, TV and a CD-i / Photo CD, p. 24.
Define Decoder/Descrambler programme numbers
If you have connected a decoder or a descrambler, see p. 22, you can define
one or more programme numbers as decoder programme numbers.
•Press the p or πkeys to select Off, EXT1 or EXT2, the euroconnector
where you connected your decoder.
•Select Off if you do not want the selected programme number being activated
as a decoder programme number.
Select EXT2 when the decoder is connected to your EasyLink video recorder.
When selecting the decoder, the message EasyLink: Downloading Presets....
appears on the screen.
Information Line
After the selection of a TV programme or after pressing the ikey on the
remote control, a TV channel which broadcasts teletext may transmit the name
of the TV channel or the programme name or another message which appears
briefly in the information line on the screen.
When selected Off, the information line will only appear after pressing the i
key, and not after the selection of a TV channel.
INSTALLATION
Menu Language
Country
Automatic Installation
Manual Installation
Give Name
Reshuffle
Favourite Programmes
Connection diagrams
SETUP
JSETUP
SETUP
CD-i/Photo CD
Decoder/Descrambler
Information Line
NEX TV IEW Provider None/0.99
INSTALLATION
JCD-i/Photo CD
Decoder/Descrambler
Programme
Decoder Status
JProgramme
3104 305 4724.5.gb 28-05-1999 10:09 Pagina 7

8
NEXTVIEW provider
NEXTVIEW enables you to see a television programme guide on the screen
instead of in a weekly magazine. See NEXTVIEW, p. 15.
NEXTVIEW functionality is based on extended teletext services offered by TV
channels, providers. Normally you will select as NEXTVIEW provider the TV
channel that transmits most information in your language. You can make the
best selection via info from TV announcements or from the newspapers.
•Select the programme number of the desired TV channel as stored in the
favourite programme list, with the por πkeys or with the digit keys. The
selected TV channel will provide a programme guide and additional info of its
own broadcasts as well as from other (non selected) TV channels.
•Select None if you only want the programme guide of the watched TV
channel.
Important:
In order to have the actual time and date displayed in the NEXTVIEW screen and
NEXTVIEW working properly, the first TV channel from the favourite list should also
broadcast teletext.
Please check at startup if the time and date are correct in the NEXTVIEW screen.
Not all TV channels support NEXTVIEW.
How to make use of NEXTVIEW, see p. 15.
Installation
Select Installation and press the OK key to return immediately to the
INSTALLATION menu.
To exit from the menu
‘Keep the red menu key on the door of the remote control pressed.
Should your remote control be lost or broken you can still change some of
the basic picture and sound settings with the keys on top of the TV.
•Press the MENU key repeatedly to select Volume, Brightness, Colour or
Contrast.
•Press the - or + key to regulate the selected adjustment.
When the menu adjustment is not displayed, the - and + keys enable you
to select the TV channels.
The selected adjustment automatically switches off when after 10 sec. no action has
been executed.
The keys on top of the TV
3104 305 4724.5.gb 28-05-1999 10:09 Pagina 8

9
Use of the remote control
uSelect peripherals
Press this key repeatedly to select EXT1,
EXT2, EXT3 or FRONT, according to where
you connected your peripherals (see p. 22).
MMode selection
Press this key repeatedly to indicate the
peripheral equipment you want to operate
with the remote control.
TV TV operation
Press this key to use the remote control
directly in the TV mode
PProgramme selection
To browse through the TV channels activated
in the Favourite Programme menu. See p. 6.
VVolume
The volume is adjusted. If you want to store
the volume adjustment in the memory, see
the Features menu, Store PP, p. 13 to store
the same volume adjustment for all the
stored TV channels.
¬ Mute key
Temporarily interrupt the sound or restore it.
BStandby
The set is switched off and the red indicator
(green in the case of NEXTVIEW info
acquisition) lights up.
In case of NEXTVIEW acquisition the TV is
switched to full standby after about 30 min.
and the red indicator lights up.
To switch the TV on again, press - P + or the
digit keys.
0/9 Digit keys
To select a TV channel.
For a two digit programme number, enter the
second digit within 2 seconds.
0Previous programme
The previously selected TV channel is
displayed.
iScreen information
Press for 5 seconds to activate/de-activate
extended or reduced display of TV channel
and programme information on the screen.
Press briefly to display information about the
selected TV channel and programme, the
sound reception, the selected DNR setting
and picture format and the remaining time set
with the sleeptimer.
Smart Keys
To select predefined picture and sound
settings.
Smart Picture
Each time it is pressed, a different picture
setting is selected, corresponding with a
specific predefined setting of Contrast,
Colour, Sharpness and Dyn. Contrast.
Smart Sound
Each time it is pressed, a different sound
setting is selected, corresponding with a
specific predefined setting of Treble, Bass
or Loudness.
Personal refers to the personal preference
setting of picture and sound which you
have stored with Store PP in the Features
menu, p. 13.
The smart picture and sound settings are set
to Manual until the personal adjustments
are stored and you switched off the TV
and on again.
VCR 1
VCR 2
SAT
AMP
TUNER
TAPE
DCC
CD
TV
ZOOM
π
π
π
π
OK
M
u
TV
b
æ
q
b
B
123
456
789
PICTURE
SOUND
SMART
+
-
VP
+
-
¬
0
i0
bPicture in Picture
Press the bkey to switch PiP on or off.
How to operate PiP, see p. 19.
qPicture format
Press this key repeatedly to switch to a
Wide Screen format.
A black bar appears at the top and the
bottom of the screen.
The TV has an automatic switching function via
eurocable. Video recorders or programmes
carrying special signals will automatically switch
the TV to the correct screen format if connected
with a eurocable..
3104 305 4724.5.gb 28-05-1999 10:09 Pagina 9

10
123
456
789
0
d
TXT dfh
P+
-c
π†
ÒC
‡
U
yÚ
X
P
Sfis
j
UTime display
The time, downloaded from the TV channel
(with teletext) stored on programme number
1 or under the lowest favourite programme
number, is displayed on the screen.
This function is not available when continuous
subtitles have been switched on.
jContinuous subtitles
TV channels with teletext often transmit
certain programmes with subtitling.
Switch on teletext and select the proper
subtitle page from the index.
Press jto store the subtitle page.
Switch off teletext.
Every time a programme of the selected TV
channel is subtitled, the subtitling will be
available for that TV channel.
Press jto switch subtitles On or Off.
When switched on and the subtitle symbol
appears, there are no subtitles available for
that programme.
fi Strobe
Press this key to reproduce the picture image
by image.
Press the fikey to have a faster speed.
Press fiagain to switch off the strobe
function.
sPersonal Preferences
Restore picture and sound settings, stored in
the features menu (see p. 13).
SFreeze
To activate/de-activate the frozen picture.
PDyn. Noise Reduction
To reduce the image noise and improve
picture quality when receiving weak signals.
Press this key to select Off or Automatic.
When Automatic is selected, the image
noise reduction is set automatically.
XBilingual choice and sound
mode selection
Press this key
• to switch from Digital Sound to Digital
Sound available, in case of digital
transmission;
• to choose between language Y(Dual Y)or
language Z(Dual Z), in case of bilingual
transmission.
The setting is stored for each TV channel
separately.
SOUND
SMART
0
i0
æb
Programmes
Select the desired TV channel and press the
OK key.
Surround-mode selection
Press this key repeatedly to select another
surround mode: Pro Logic, Dolby 3 Stereo,
Hall or Off.
æNEXTVIEW on/off see p.15
PICTURE, SOUND AND FEATURES menu
bTeletext on/off see p. 20.
3104 305 4724.5.gb 28-05-1999 10:09 Pagina 10

11
Use of the menus
&Press the red, green or yellow colour key to display/cancel the PICTURE,
SOUND or FEATURES menu.
éUse the Akeys to select the menu item.
“Use the OK key to activate.
‘Press the same colour key again to return or to switch menu off.
Picture menu
When you are watching a TV channel in the NTSC-system, or if a NTSC peripheral
is connected to one of the euroconnectors, the option Hue also appears.
•Store the modified adjustments for Contrast, Brightness, Colour, Tint, Digital
Scan and Dynamic Contrast for all TV channels with Store PP in the
FEATURES menu.
Sharpness
You can adjust the Sharpness for each TV channel separately.
Tint
•Select the colour temperature: Normal, Warm or Cool.
Digital Scan (Line Flicker Reduction)
In certain circumstances while watching TV programmes it may be preferred
to switch off the digital scan line flicker reduction.
•Press the p or πkeys to select On or Off.
Dynamic Contrast
To make the contrast between darker and brighter picture parts more
noticeable, select the Med setting.
In certain circumstances it may be preferred to select Min or Off.
Sound menu
•Store the modified adjustments for Volume, Treble and Bass from the Graphic
Equalizer menu and Loudness for all TV channels with Store PP in the
FEATURES menu.
Graphic Equalizer
Here you can select the preferred sound style which does not correspond with
a specific predefined setting of the graphic equalizer under the Smart Controls
key M. The sound style is set to Manual until the personal graphic equalizer
settings are stored and you have switched your TV off and on again.
Switch Loudness on or off
When Loudness On is selected, the low and high frequencies are amplified so
that the natural balance is restored when listening at a low volume.
The selected setting for Loudness is stored for all TV channels.
Headphone
See Connect Peripheral Equipment, p. 24 for the connection of the headphone.
Select Dual to choose between the dubbed or original language when the TV
channel broadcasts in two languages.
To exit from the menus
•Press the corresponding red, green or yellow colour key.
PICTURE
Contrast
Brightness
Colour
Sharpness
Tint
Digital Scan
Dynamic Contrast
JContrast L M
SOUND
Dolby Pro Logic
Volume
Graphic Equalizer
Loudness
Headphone
JVolume L M
FEATURES
Store PP
PiP position
Sleeptimer
Message
Child Lock
Animation demo
JStore PP
VCR 1
VCR 2
SAT
AMP
TUNER
TAPE
DCC
CD
TV
ZOOM
π
π
π
π
OK
M
u
TV
b
æ
q
b
B
123
456
789
PICTURE
SOUND
SMART
+
-
VP
+
-
¬
0
i0
activate
picture menu
sound menu
features menu
programme list
select adjustments
Headphone
Volume
Dual
J(Dual)
3104 305 4724.5.gb 28-05-1999 10:09 Pagina 11

12
Dolby* Pro Logic
Adjust the volume balance level of the loudspeakers
Most programmes will sound good with the volume balance between the
centre left and right and rear loudspeakers in an equally loud position.
However, some programmes may benefit from an adjustment of the level of
the respective speakers.
Which loudspeakers are active depends on the Surround Mode selection you
make below.
&Select Pro Logic in Surround Mode of the DOLBY PRO LOGIC menu.
éSelect Start Test and press the OK key.
A steady noise tone is switched sequentially through the left, centre, right and
rear loudspeakers, for 2 seconds each. This enables you to adjust the volume
of the separate loudspeakers.
The loudspeakers activated light up in the on screen graphic.
“Select Centre Volume, Balance or Rear Volume and alter the selected
adjustments.
‘Select Stop Test in the DOLBY PRO LOGIC menu and press the OK key when
you have finished the adjustments of the level of the speakers.
Surround mode
Select the Dolby Surround Sound mode according to the sound mode being
broadcast.
Pro Logic (with Dolby Surround broadcasting)
In addition to the left and right front speakers, the centre and the rear
surround loudspeakers reproduce the Dolby Surround Pro Logic sounds.
This 4-channel sound is always recorded when the movie or programme is
marked with Dolby Surround.
This mode is especially recommended for such programmes as movies.
Dolby 3 Stereo (with Dolby Surround broadcasting)
The Dolby 3 Stereo sound signal is now distributed over the front left, the
front right and the centre loudspeakers.
The rear loudspeakers do not produce any signal.
Hall (with Dolby Surround broadcasting)
The centre sound signal is distributed over the rear loudspeakers which
creates a hall effect from the rear.
The centre loudspeaker does not produce any signal.
This mode is recommended when you wish to add surround sound to a
broadcast which is not encoded Dolby Surround.
Off
This mode reproduces only the left and right front sound signals.
You only hear a stereo sound if the broadcast which you are watching or
listening to is transmitted in stereo or digital sound.
•Press the green MENU key to return to the SOUND menu.
‘Dolby’ ‘Pro Logic’ and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
Manufactured under license from Dolby Laboratories Licensing Corporation.
*
Pro Logic
Hall
Dolby 3 Stereo
Off
SOUND
Dolby Pro Logic
Volume
Graphic Equalizer
Loudness
Headphone
JDolby Pro Logic
Dolby Pro Logic
Start Test
Stop Test
Centre Volume
Balance
Rear Volume
Surround Mode
JStart Test
Centre
Right
Rear Rear
Left
3104 305 4724.5.gb 28-05-1999 10:09 Pagina 12

13
Features menu
&Press the yellow colour key to display/cancel the FEATURES menu.
éUse the Akeys to select the menu item.
“Use the OK key to activate.
Store PP
The adjustments of Contrast, Brightness, Colour, Tint, Digital Scan and
Dynamic Contrast made in the picture menu and the adjustments of Volume,
Graphic Equalizer and Loudness made in the sound menu can be stored in
memory for all the TV channels.
PiP position
•Press the por πkeys to move the pip picture to another corner of the
screen.
Sleeptimer
With the sleeptimer you can set a time period after which the TV should
switch itself off to standby.
The counter runs from Off up to 180 min. or from 180 min. down to Off.
One minute before the TV is set to go to standby, the remaining minute
appears on screen. You can always switch off your set earlier or change the set
time.
Child Lock
If the child lock is on, the TV can only be switched on with the remote control.
The - and + keys on top of the TV cannot be used to select a TV channel. In
this way you can prevent unauthorised use of your TV.
If the message Child Lock On appears, the child lock must be switched off
before you can use the - and + keys on the TV to select a TV channel.
Animation demo
Selecting this menu item starts a continuous loop of an animation introducing
your TV. This animation has no operational function.
Press the OK key to stop the animation.
Store PP
PiP-position
Sleeptimer
Message
Child Lock
Animation demo
JFEATURES
VCR 1
VCR 2
SAT
AMP
TUNER
TAPE
DCC
CD
TV
ZOOM
π
π
π
π
OK
M
u
TV
b
æ
q
b
B
123
456
789
PICTURE
SOUND
SMART
+
-
VP
+
-
¬
0
i0
activate
features menu
select
adjustments
3104 305 4724.5.gb 28-05-1999 10:09 Pagina 13

14
Message
With this function you can enter a personal message on 2 lines which will be
displayed automatically when the set is switched on from standby.
For example: I'll be late this evening. Don't wait for dinner.
Change
•Select with the oor œkeys the letter or number you want to enter.
•Select with the πkey the next position.
•Press the OK key when you have entered the complete message.
Clear
•Press the OK key to remove a previous message.
Type
•Press the por πkeys to select the way the message will be displayed :
Wipe, Slide, Fall or Fade.
The Fade display is a randomly selection of the three other display types.
Run
•Press the por πkeys to select the display frequency : Continuous, Once
or No.
Display message
•Switch the TV to standby.
The message appears on the screen when the TV is switched on again.
If you selected Once, the message will disappear from the screen after
30 seconds.
If you selected Continuous, the message will appear on the screen until the
display frequency is switched off in the Message menu.
The message does NOT appear when Continuous Subtitles have been switched
On. See p. 10.
FEATURES
Store PP
PIP-position
Sleeptimer
Message
Child Lock
Animation demo
JMessage
Message
Message ...........................
...................................
Change
Clear
Type
Run
JChange
3104 305 4724.5.gb 28-05-1999 10:09 Pagina 14

15
NEXTVIEW
NEXTVIEW is the TV guide out of a weekly magazine integrated in the TV.
Some broadcasters provide information about their own programmes and
sometimes other TV channels for one or more days. Select the desired
broadcast provider in the Setup menu, p. 8.
You can search for the programmes you want to watch 24 hours per day. It is
also possible to search for a programme by theme, e.g. sport, movie, etc. or by
time, e.g. what’s on tonight on BBC1 between eight and nine o’ clock. Once a
programme has been selected it can be tagged, to remind you, or to record on
the video recorder automatically (provided the video recorder is equipped
with NEXTVIEWLink), once, daily or weekly. NEXTVIEW also allows direct access
to stored information on programmes provided by the broadcaster.
The broadcaster is responsible for the contents of the information. The TV is
responsible for the capture of that information and for the presentation to the user. A
menu-structure, selection and navigation possibilities are provided by the TV software.
Use of the NEXTVIEW menus
&Press the ækey on the remote control to display/cancel the NEXTVIEW
menu.
éPress one of the colour keys:
•to select the way the programmes are sorted:
DAY for the daily guide, CHANNEL for the channel guide, THEME for the
theme guide, OVERVIEW for an overview of all the programmes which
are marked as reminders or for recording;
•to select one of the basic functions, record, remind, watch, info, after you
have selected a programme with the œkey ;
•to select one of the record/remind intervals: once, daily, weekly, clear or
Series in case of a serial;
•press the white colour key to quit NEXTVIEW , to return to a previous
screen or to close the Info screen.
“Use the Akeys to select the date, the time block, the TV channel, the theme
or to enter in the programme list.
When the use of the Akeys is possible arrows are presented to indicate the
possible selections.
Date time
-15min pTime block π+15min
BBC1 18.00 News
18.30 Sport Panorama
TF1 18.00 Journal
18.40 Sport
ARD 18.00 Nachrichten
18.30 Heimat
RAI1 18.00 Giornale
18.20 Kwis
NED1 18.00 Nieuws
18.30 Sesamstraat
MODE
OVERVIEW
CHANNEL
THEME
DAY
<<<<<
Additional information
p ITime block π
VCR 1
VCR 2
SAT
AMP
TUNER
TAPE
DCC
CD
TV
ZOOM
π
π
π
π
OK
M
u
TV
b
æ
q
b
B
123
456
789
PICTURE
SOUND
SMART
+
-
VP
+
-
¬
0
i0
æ
3104 305 4724.5.gb 28-05-1999 10:09 Pagina 15

16
The NEXTVIEW offers 4 modes to sort
and represent information
Day
The day guide provides an overview of all programme titles active in the
selected time block. Time blocks are 15 minute intervals starting from the
current time of the current day until 03.00 hours of tomorrow.
The default order is based on the programme list of the favourite TV channels
as stored in the installation of the TV. TV channels not marked as favourite TV
channels will not appear. The currently watched programme is selected and
displayed at the top of the list.
Default NEXTVIEW opens with the DAY screen.
If None has been selected as NEXTVIEW provider in the Setup menu, the day
screen will be absent.
Channel
The channel guide provides an overview of all programmes per selected TV
channel on the selected date.
The list will start with the earliest broadcasted programme.
Theme
The theme guide displays a list of all programmes at the selected date, that
matches with the selected category (news, sport, culture, movies...).
The default starting item will be the current or next programme on the current
TV channel.
When more than one programme starts at the same time, they are displayed
according to the programme number.
When another date is selected the list of programmes displayed will start with
the earliest programme.
The THEME selection possibility is only present if programmes in the TV guide,
have defined themes.
Overview
The Overview list provides a list of all reminders and recordings per day. The
first item displayed will be the one closest in time.
When more than one of the same items start at the same time or have an
overlap in time these will be marked by a flashing highlight and a message.
After the programme has been broadcast, all items set for once will be deleted
from the list.
DAY
OVERVIEW
CHANNEL
THEME
<<<<<
Date time
17.45 p I18.00-18.30 π18.45
Jchannel - start - prog.
Info block
CHANNEL
OVERVIEW
THEME
DAY
<<<<<
Date time
TF1 p J BBC1 πRAI1
Jchannel - start - prog.
Info block
THEME
OVERVIEW
CHANNEL
DAY
<<<<<
Date time
News p J Sport πMovies
Jchannel - start - prog.
Info block
OVERVIEW
CHANNEL
THEME
DAY
<<<<<
p I Date πtime
Info block
3104 305 4724.5.gb 28-05-1999 10:09 Pagina 16

17
Acquisition and updating of NEXTVIEW information
DAY
Record
Remind
Watch
Info
<<<<<
Date time
17.45 p I 18.00-18.30 π18.45
BBC1 18.00 News
NED1 18.00 Studio Sport
TF1 18.10 Hit Parade
ARD 18.15 Nachrichten
RAI1 18.20 Giornale
Info block
JNED1 18.00 Studio Sport
DAY
record
clear
once
daily
weekly
<<<<<
Date time
17.45 p I 18.00-18.30 π18.45
BBC1 18.00 News
NED1 18.00 Studio Sport
TF1 18.10 Hit Parade
ARD 18.15 Nachrichten !
RAI1 18.20 Giornale
Info block
JNED1 18.00 Studio Sport R
Basic functions
The function Watch is only available if a currently broadcasted programme is
selected. Otherwise the function is not available.
The selection causes the TV to tune to the selected channel and NEXTVIEW is
switched off.
When Info is activated, information relating to the selected programme or
advertisements are displayed.
When Record Ror Remind !are activated the screen turns to Record or
Remind mode. This is indicated by a tag-box appearing after the selected
programme. The default interval is set to Once. The colour of the tag refers
to the interval.
After setting the interval the message Storing appears to indicate the tuner of
the video recorder is programmed.
When watching a certain programme, a message will appear on the screen the
moment the tagged programme with !starts.
When the TV is in standby, the TV switches on the moment the tagged
programme with !starts.
In case where a series tag is broadcast the options daily and weekly can be
replaced by the option series. In this case the system identifies when the next
episode of the series will be broadcast.
Acquisition and updating of NEXTVIEW information for the selected provider, if
any, is done when the TV is switched to standby after watching the TV.
The TV enters a semi standby mode, the indicator remains green and switches
to full standby automatically after all needed acquisition or updating is
complete, the indicator then turns red. As long as the TV remains in standby,
acquisition will again happen during the night.
Acquisition is however only done if the start of the previous period of semi
standby is 12 or more hours in the past. So, the information acquisition for the
selected provider is done as a maximum twice a day.
Acquisition for non selected providers (selection None in the Setup menu) is
only done while watching the TV channel and when NEXTVIEW is not active.
Note: it may be necessary to put the TV into standby mode when all NEXTVIEW
information is outdated, e.g. returning from holiday. In this case a message is
displayed.
3104 305 4724.5.gb 28-05-1999 10:09 Pagina 17

18
The Record item and the automatic recording will only be present and
possible if your video recorder is equipped with NEXTVIEWLink.
The daily, weekly or series options, the number of recordings set and the way
overlapping recordings are managed, depend on the type of video recorder
type you have. The moment all video recorder timers are used, the item
Record in the menu will be removed.
Upload video recorder overview.
When the TV is switched on, the programmed record blocks are uploaded to
the TV to check whether any manual addition or deletions have been done.
This is shown in the overview.
The video recorder manages and removes timer recordings when performed.
Some NEXTVIEWLink video recorders do not allow a daily programming of
recording to start on a Saturday or Sunday. In this case the item daily will be
removed from the menu on those days.
Video recorder restrictions with NEXTVIEW
3104 305 4724.5.gb 28-05-1999 10:09 Pagina 18

19
VCR 1
VCR 2
SAT
AMP
TUNER
TAPE
DCC
CD
TV
ZOOM
π
π
π
π
OK
M
u
TV
q
B
123
456
789
PICTURE
SOUND
SMART
+
-
VP
+
-
¬
0
i0
TXT dfh
j
π†
ÒC
‡
U
yÚ
X
P
Sfis
d
P+
-c
b
b
Press to switch pip on and off
P
Press P- or P+ of the pip keys to select EXT1, 2,
3or FRONT, to select the peripheral you want
to watch in the pip screen.
In case of a video recorder with EasyLink.
As soon as you select EXT2 you can change the TV
channels in the pip screen with the P- or P+ key.
A message displaying which TV channel appears in
the pip screen, appears on the screen.
Press the P- or P+ key for about 2 seconds to leave
EXT2 where the video recorder is connected.
When the main screen displays a programme
from a peripheral, press the P- or P+ key in
order to change the TV channels in the pip
screen.
To directly select a peripheral in the pip screen,
press the P- or P+ key for 2 seconds.
d
Press to freeze the picture in the pip
screen or to make a snapshot of the
main screen. Press again to cancel the
still picture.
c
Press to exchange the picture in the main
screen and the one in the pip screen.
With PiP, Picture in Picture, you can call up a small screen within the main
screen.
This enables you to watch a programme from equipment connected via
a eurocable, at the same time as the main screen.
The picture in the small screen has no sound.
PiP - Picture in Picture
A
B
A
B
3104 305 4724.5.gb 28-05-1999 10:09 Pagina 19

20
About the Easy Text system
The Easy Text system considerably reduces the waiting time (on condition the
teletext broadcast of the particular TV channel is switched on for at least half a
minute) by :
•adirect selection of previous and following pages which are in transmission
and of the pages referred to in the options line
• a habit watcher list: frequently used pages are put in a list of preferred
pages, so that they are immediately available afterwards
• the precapturing of the page numbers referred to in the displayed page
• the precapturing of all the subpages.
Switch Teletext on and off
•Press bto switch on or off the teletext.
The main index page appears on the screen together with two information lines
at the top and one option line at the bottom of the screen.
Select a Teletext page
With the digit keys
•Enter the desired page number with the digit keys.
The page counter seeks the page or the page appears immediately when the
page number has been stored in the memory.
A message appears when you have entered a non existent or an incorrect page
number. Page numbers beginning with 0 or 9 do not exist. Choose another number.
With the option line
•Select with the colour keys, corresponding to the coloured options at the
bottom of the screen, the desired subject.
Quickly run through the teletext pages
•Press o or œor the - P + key to run through the previous or the following
pages.
Select the previously selected txt page
•Press the 0key.
Teletext
Most TV channels broadcast information via teletext. Each channel which
broadcasts teletext transmits a page with information on how to use its
teletext system. Look for the teletext page with the main index (usually p. 100).
Depending on the TV channel, teletext is transmitted in different systems.
The colours used in the options line correspond with the colour keys of your
remote control.
VCR 1
VCR 2
SAT
AMP
TUNER
TAPE
DCC
CD
TV
ZOOM
π
π
π
π
OK
M
u
TV
b
æ
q
b
B
123
456
789
PICTURE
SOUND
SMART
+
-
VP
+
-
¬
0
i0
b
3104 305 4724.5.gb 28-05-1999 10:09 Pagina 20