Plenio VXA-3000 User manual

ƕEnsure to read theũSafety PrecautionsŪcarefully before using this product. ƕProduct warranty is included in this UserŪs Manual.
ҶNavigation function ҶAudio player function ҶGame function ҶAux function
UserŪs Manual VXA-3000
Please write the manufacturing date down here, which is needed for registration at our web site. (You can find the manufacturing date at the rear side of the product.)

Thank you for purchasing our product.
VXA-3000 Userœs Manual is designed to support convenient usage of the navigation system and
safe driving. Please read the manual carefully before using the product for safe usage.
The content of this manual can vary according to the navigation system version, and function or
performance of the navigation system and this manual are subject to change without the prior
notice for userœs convenience.
Make sure to read this manual for safe driving.
Please comply with the following instruction to prevent the property loss of the driver and user.
1
Warning Do not set or search the position while youœre driving. Make sure to park a
car at a safe place before operating this device.
Warning
Warning
Voice guide and map route can be different from the actual road condition.
Ensure to comply with the actual road signal system and traffic regulation for
safe driving.
Caution
This product contains the safe driving information for driverœs safe driving.
However, this information can be different from the actual traffic condition.
Drive safely according to the actual road condition.
VXA-3000
It is very dangerous to operate the navigation system or look at the screen
while youœre driving. Be careful of surrounding traffic condition or pedestrian
if you have to operate the system while youœre driving.

Basic Operation
About VXA-3000
1. Directions before using this product
2. Components
3. Description on product appearance
4. Installing product
Using VXA-3000
1. Basic functions of VXA-3000
2. Learning basic remote controller functions
3. Main menu
4. Quick Start
5. Detailed Description
6. Setup Assistantn
7. Frequently asked questions
8. Audio player
9. Video Player
10. Image Viewer
11. Game
12. Aux
13. Setup
2VXA-3000
3
3
3
6
7
9
11
11
12
14
14
19
43
45
46
49
52
54
55
58
Table of Contents
Upgrading VXA-3000
How to register the member
Downloading Navi or OS
What is V-Up Pro 3000
Specification
A/S and Product Enquiry
A/S and Product Enquiry
Customer Service Center
62
62
62
62
63
64
64
64

1. Directions before using this product
Read thisŔUserœs Manualŕwithout fail before using this product to use this product safely.
1-1. Usage directions
3
About VXA-3000
VXA-3000
Warning Refrain from operating the product. Please park a car at a safe place when operating
the product, because there is danger of a traffic accident.
Voice guide and map route can be different from the actual road condition. Ensure to
comply with the actual road signal system and traffic regulation for safe driving.
Warning If you modify the car to install this system, safe driving can be endangered.
Caution Do not use this product for a long time after stopping the engine. The car battery can be
discharged completely.
Caution
Do not use other cables than provided. Turn off the power when connecting the
external cable like A/V input, stereo output, and indoor TV antenna. If you connect
the cable while the power is on, the product can be damaged.
Caution Do not disassemble or apply shock to this product.
Warning
Caution Touch the touch panel with a round edge object or fingertip softly. If you press the touch
screen strongly with a sharp and hard object, it can damage the product.
Caution Turn off the power and use the clean and dry cloth when cleaning the screen. Keep
the screen away from water or chemical substance like detergent or solvent.
Basic Operation
Warning
PLENIO will not be liable for any damages arising out of any use of the software. The user
will bear the sole responsibility.
Warning
You have to take care, because applied windshield suction cup mount(suction cup) is able to
remove from the front windshield by vibration, sudden temperature changes, unexpected
sock and etc. If suction cup is removed suddenly by unexpected reason, navigator is able to
break and your car is damaged by navigator.
Caution
While Audio player, Video player or Navigation is operating, if you remove the
SD Card memory, system will be get into unstable situation. Please donŪt remove
SD Card memory during playback. If system is unstable because SD Card memory
is removed, turn off the system and rebooting.

1-2. Installation directions
4
About VXA-3000
VXA-3000
Warning Connect the wires properly by referring toŔInstalling productŕsection. Otherwise,
malfunction or accident may occur.
Caution Use the connection cable for vehicle only that was provided at the time of product
purchase to ensure stable system operation.
Warning Do not install the product in a position where driving can be interfered or driverœs
field of vision can be blocked.
Caution This product must be used with 12V car power only. Do not use 24V power.
Caution
Some functions of this system are disabled for driverœs safety when the car is in motion.
Remove the test jack installed in the safety terminal and ensure to connect the hand brake
cable to the car hand brake. If this cable is not connected, onlyŔaudioŕof the TV and Aux
will be supported.
Caution Connect the Aux cable such as line out or A/V in after turning the power off. If the power
is on while connecting the cable, the product can be damaged.
Caution Do not install the product in a place with much water, humidity, vapor, dust, oil, or smoke.
Warning Install the product in a position that does not interfere driving or safety devices like an air bag
at the time of product installation and wiring.
Caution
If you donœt use the product for a long time after purchasing this product, car position
sensing time can be prolonged, since the GPS antenna backup battery can be discharged.
In this case, charge the batter for 2 ~3 hours while using the navigation system.
Caution
Do not put the object that interferes with GPS signal reception around the GPS receiver.
Radio interference may occur.
Caution
Do not install the electronic product that generates heavy electromagnetic waves like a radio
transmitter around the GPS antenna as much as possible.
Caution
GPS reception can be blocked if the car front side glass is specially coated.

1-3. Upgrade directions
1-4. Troubleshooting
1) Touching does not work
If you cannot set touching in the Setup menu due to wrong touch setting, use
the remote controller instead.
ȘPress the [Initial Screen] button on the remote controller to open the main menu
screen.
ȘPress the [F2] ơ[F3] ơ[F2] ơ[Full Screen] button sequentially to open the Touch
Setting screen
ȘPress the 5 cross marks using the test jack or touch adjustment rod, according to the
instructions displayed on the screen.
ȘPress the screen once to close the Touch Setting screen.
2) The LED turns on or flashes in red resulting in the VXA-3000 self-diagnostic
Addition to the VXA-3000 problem, when the temperature inside the car is too high
or low, the red LED flashes. In this case, follow the steps below.
ȘTurn the product power off and ventilate the car to get normal temperature.
ȘTurn the power on after a little while and observe the LED color.
ȘIf the red LED still flashes in normal temperature, ask for the service at A/S center.
5
About VXA-3000
ȘDepending on the SD Card memory product, the SD Card memory sensing time may vary
or sensing may fail.
VXA-3000
Park the car in a safe place for touch setting.
Basic Operation
Caution

6
About VXA-3000
2. Components
VXA-3000
Remote
controller
Test jack
VXA-3000 body
Stereo output cable Hand brake
connection cable
SD Card memory
reader
Car holder Userœs manual
Red : + : Bluek
-
SD Card memory
Aux cable
(AV In terminal) Cigar jack cable
NAVI
GAME AUX VIDEO
MAIN
IMAGE
OK
F4
F1 F2 F3
F5
FILE LIST PLAYTYPEFULL SCREEN
SCREEN OFF SETUP

3. Description on product appearance
3-1. Front/Right side
ڡTOUCH SCREEN : Handles user touch input.
ڢLED : Displays the product status.
(Blue: Normal operation, Red: Malfunction)
ڣREMOTE CONTROLLER BEAM RECEIVING UNIT : Receives the remote control signal.
ڤAUDIO OUT : Output the audio signal to the external device.
ڥAUDIO/VIDEO IN : Receives the A/V input from the external device like a DVD player.
ڦCOMM : Connects to the car DVD player (optional). Controls the DVD player using the touch
screen. (Compatible model: VXM-2000 family, VXD-2100)
ڧUSB : Connector for A/S.
ڨSAFETY : Connects to the car hand brake after removing the test jack, which is installed in
advance for safety.
7
About VXA-3000
ڤ
ڥ
ڦ
ڧ
ڨ
ڡڢڣ
VXA-3000
Basic Operation

3-2. Rear/Left side
ڡDMB ANT
ڢSPEAKER : Outputs 1 watt audio.
ڣGPS ANT
ڤDC 12V : Connects to the provided cigar jack.
ڥPOWER SWITCH : Turns the power on/off.
ڽSD Card memory slot
8
About VXA-3000
ڥ
ڢ
VXA-3000
ڡڣڤ
ڦ

4. Installing product
1) Fix the holder on the car dashboard where the driver feels comfortable.
GPS sensitivity will increase if you use the GPS pedestal. Use the GPS pedestal in
any case.
2) Adjust the position to fit into the driverœs field of vision after fixing the product on the
pedestal.
9
About VXA-3000
Caution Remove the foreign object from the holder fixing place so that the holder can be attached
firmly. Then, fix it with screws to prevent falling down due to shock.
Do not install the holder at the position that hampers driverœs vision or driving. Be careful not to interfere
driving or the safety device like an air bag.
VXA-3000
Basic Operation

3) Connect the power cable to DC 12V terminal located at the left side of the product
and car cigar jack.
4) Remove the test jack from the Safety terminal and then, connect the cable to the hand brake.
5) Press the power switch ON that is located at the left side of the product.
10
About VXA-3000
Caution Use the car cigar jack that is included in the product package. If you use other cigar
jack, the product may not work properly.
Caution Make sure connect the cable to the car hand
brake to prevent operation while in motion. If the hand brake
connection cable is not connected, onlyŔaudioŕexternal input will
be supported.
VXA-3000
Red : + : Blue
-

1. Basic functions of VXA-3000
1) Navigation function : Helps car navigation using GPS (Global Positioning System) engine and
antenna, and electronic precision map.
2) Audio player function : Plays back MP3, WMA, WAV and OGG music files.
3) Video Player function : Plays back video files.
4) Image Viewer : GIF, JPEG and BITMAP image files.
5) Game function : Provides enjoyable games.
6) Aux function : Connects the DVD player manufactured by this company. When connected to
other manufacturerœs product, Aux function can be used.
7) Setup setting function : Various functions can be configured such as slide show, main theme,
touch setting, volume control, Dimmer control, OS upgrade, A/V input, and FM transmitter.
11
Using VXA-3000
VXA-3000
Basic Operation

Using VXA-3000
 >@)
2. Learning basic remote controller functions
You can use frequently used function using the remote controller, as well as the touch screen for more
convenient usage of VXA-3000.
ȯ : See additional function.
ȯ : See additional function.
ȯ : Reserved.
ȯ : Reserved.
ȯ : Reserved.
ȯ : Turns on/off the LCD screen. Voice guide and audio play back will continue even the LCD screen
is turned off.
ȯ : Directly switches to the Setup function.
ȯ : Moves the cursor upward.
ȯ : Moves the cursor downward.
ȯ : Moves the cursor left.
ȯ : Moves the cursor right.
ȯ: Controls screen brightness by 5 steps.
ȯ: Mutes the sound temporarily.
ȯ: Directly switches to the Navigation function.
ȯ: Directly switches to the audio player function.
ȯ: Directly switches to the initial screen.
ȯ: Directly switches to the Aux function.
ȯ: Directly switches to the Video player function.
ȯ: Directly switches to the image function.
ȯ: Display the file list of Video/Audio player and Image
viewer.
ȯ: Enlarge the Image or Video screen size to full LCD size, during
Video player and Image viewer function is operating.
NAVI
GAME AUX VIDEO
MAIN
IMAGE
OK
F4
F1 F2 F3
F5
FILE LIST PLAY TYPEFULL SCREEN
SCREEN OFF SETUP

Ș: Selects the cursor that was moved by the direction key.
Ș: Play back/Pause Audio or Video playback and show selected image in Image viewer mode.
Ș: Moves audio or DVD playback section backward in Audio player/Aux mode. In Image viewer
mode, shows previous image.
Ș: Moves audio or DVD playback section forward in Audio player/Aux mode. In Image viewer
mode, shows next image.
Ș: Stop Audio , Video or DVD playback.
Ș: Moves Audio or DVD playback section backward fast in the Audio player/Aux mode.
Ș: Moves Audio or DVD playback section forward fast in the Audio player/Aux mode.
Ș: Sets volume up or down.
Ș: Sets Repeat All/Repeat Start when playing back DVD, or Repeat All/Repeat Selected/Random
Selection when playing back MP3.
[Additional Remote controller function : Under button is redefined when File list
function is enabled in the Video player, Audio player or Image viewer mode.]
ƚBasic screen at the Image viewer
Ș: Zoom in function.
Ș: Rotate to left.
Ș: Zoom out function.
Ș: Rotate to right.
ƚDuring file list is enabled
Ș: Moves cursor up.
Ș: Close file list.
Ș: Moves cursor down.
Ș: Enable the folder tap when file tap is enabled.
Ș: Enable the file tap, when folder tap is enabled. And playbacks/shows selected file
when file tap is enabled.
Ș: Moves page of file list up.
Ș: Moves page of file list down.
13
Using VXA-3000
Caution Navigation and game functions are disabled when using the remote controller.
1) Navigation 2) game
VXA-3000
Basic Operation
ƚFull screen at the Image viewer
Ș: Moves center of image up.
Ș: Moves center of image left.
Ș: Moves center of image down.
Ș: Moves center of image right.

3. Main menu
The main menu is composed of Navigation, Audio Player, Video Player, Image Viewer, Game,
AUX, Setting, Screen On/Off button and etc.
4. Quick Start
This section will walk you through using your navigation unit for the first time, acquainting you with
the basic operation of the navigation system. The functions and buttons not mentioned will be
described in 5. DETAILED DESCRIPTION on page 19.
Switch the unit on and tap on NAVI or NAVIGATION in the start screen.
After the application loads, a screen with safety precautions will be shown. Please read them
carefully. Afterwards, you can choose to hide these notes for future startups.
The main menu (Home) will appear:
14
Using VXA-3000
Screen on/off
VXA-3000

ҶSelect Navigate to set your destination.
A menu will open where you can choose a destination:
You have various ways to select your destination. The following page describes how to navigate to
a specific address.
15
Using VXA-3000
VXA-3000
Basic Operation

4-1. Navigate to An address
If you have the city and street address for your destination, simply enter it and the application will
guide you directly there.
ҶTap the Address icon.
The address search screen with the keypad will now appear in the display:
ҶSwitch between letter and number mode by pressing 123 or ABC. Switch between upper case
and lower case by pressing ^.
ҶIf at any point you want to Backspace and delete characters, press the backspace button <- on
screen. To add a space, press the space bar |__|.
ҶTap on the City or P.C. field and enter your destination by tapping on the letters in the keypad
(at least three characters). Instead of the city you may also enter the postal code. Confirm the
City/postal code you have entered by pressing Search. On the following screen, choose the
appropriate city from the list by tapping on it. This will move you to the street search screen.
16
Using VXA-3000
VXA-3000

ҶOn the street search screen you may enter the street name (at least three characters) and then
press Next to go on.
ҶNext, you may enter the number. Confirm and move to a list of matching address by pressing
the Search button.
After a few seconds you will be presented with a hit list of locations that match the address entered.
ҶSelect the required address from the hit list by tapping on it.
Once the system receives a GPS signal the guidance will commence automatically. The navigation
map will be shown, displaying all directions needed. Additionally, you will be guided by clear
voice commands.
You can set further options for navigation by tapping on the screen. A menu with rich guidance
options will be shown (see RICH GUIDANCE OPTIONS on page 21).
17
Using VXA-3000
VXA-3000
Basic Operation
NOTE If you have an imprecise address, such asūTimes Square, New YorkŬ, you can enter that
as well, the only requirement is to enter some letters of the city name to begin your search.
You can also enter a unique 7-digit postal code. In that case, you do not need to enter a street name.

4-2. Navigation Screen
On the navigation map, the route will be shown in blue. The red arrow will indicate the direction of
your next manoeuvre. A silver arrow will identify your current position. When you come up to a
turn or other manoeuvre, you will hear a voice command at the appropriate time.
18
Using VXA-3000
VXA-3000
Target Street
Distance Bar
Zoom out
Current Posititon
Remaining Journey Time
Car Speed
Distance to next Manoeuvre
Manoeuvre Icon
Zoom in
Direction
Current Street
GPS info
Distance to
Destination
Optical Distance Bar

5. Detailed Description
5-1. Settings
ҶSwitch the unit on and tap on NAVI or NAVIGATION in the start screen.
After a short period of time the main menu (Home) will appear.
ҶChoose Settings
ҶChoose Language to select the language of your navigation system.
ҶIf you have map data for different regions/cities on your memory card, tap on the name of
the current region (e. g. London). All available maps on the memory card will be listed, and
you can choose by simply tapping on the desired region.
ҶSwitch between distance units (miles/kilometres) by tapping on the corresponding icon.
ҶChoose Guidance to change the guidance options.
19
Using VXA-3000
VXA-3000
Basic Operation