PodSpeakers The Drop User manual

USER GUIDE - ENGLISH
Ceiling Mount
for The Drop

THANK YOU!
Dear Customer,
Congratulations on your new The Drop Ceiling Mount.
We wish you many years of audible and visible enjoyment together
with your The Drop.
Best regards from,
Your Podspeakers Team
Model: Ceiling Mount – User Guide revision v1.0 – Oct 2017
We accept no liability for printing errors.
Mounting the ceiling mount is at your own risk.
Specications are subject to change without notice.
PODSPEAKERS 2017
EET Group A/S, Tempovej 41, DK2750 Ballerup, Denmark
USER GUIDE
www.podspeakers.com

4 5
USER GUIDE - INDEX
IN THE BOX 5
MOUNT CEILING BRACKET 6
CONNECT WIRES 7
PLACE THE COVERS 8
CONNECT THE SPEAKERS 9
What’s in the box?
A : 2 x Rubber cover
B : 2 x Ceiling bracket
C : 2 x Ceiling bracket cover
D : 4 x Wire
IN THE BOX
A (x2) B (x2) C (x2) D (x4)

6 7
MOUNT CEILING BRACKET
Mount the ceiling bracket
on the ceiling (in a horizontal
position).
Make sure to use proper
screws to match the ceiling
type.
Connect the wires to the speakers.
Start by removing the rubber top the speakers came with. Remove
the left and right screw and connect the wires by putting the screws
back through the noose. The wires doubles as speaker cables and
are now connected to the speaker terminals on the speakers.
CONNECT WIRES
13
2

8 9
PLACE THE COVERS
Put the cables through rubber top and put the rubber top back on the speaker.
Put the wires through the ceiling bracket cover.
Put the wires all the way through one set of the
cable joints and connect the wires to another side
of the terminals. The speaker cables from the
amplier should be connected to the respective
terminals to match + and -.
CONNECT THE SPEAKERS
A
D
C

10 11
PLACE THE COVER
THANK YOU!
Once again –
Thank you for purchasing a The Drop ceiling mount.
Best regards from,
Your Podspeakers Team
Place the cover on the bracket.