PodSpeakers Wallbracket User manual

Wallbracket
User manual / Bedienungsanleitung / Manual del Usario

// 2
Wallbracket for MicroPod
Thank you for purchasing Wallbracket for Micropod. Please follow the three steps listed
in this manual, to ensure a safe installation. The Wallbracket will mount on a solid wall
or ceiling, using wood-screws. Never mount your speakers on un-reinforced drywall and
always make sure that the Wallbracket is mounted into solid wood, behind the drywall.
If you feel unsure about the installation, please contact a qualified installer.
You are responsible for safe mounting of the Wallbracket. The use of anchors and screws
included in this box, is at the users own risk.
Step 1
Place the wall plate on the mounting surface and use it as a template to mark drilling
holes on the surface. Make two holes above the center line and a minimum of one hole
below the center line.
Use wood-screws to mount Wallbracket on the surface. When the wall plate has been
mounted on the surface, place the wall plate cover over the wall plate.
Step 2
Thread the spine gently, but firmly, through the wall plate until the tapered end is level
or horizontal. Fit the bracket base onto the spine and press it until it clicks into the
locked position. When in the correct position, the base will be locked and uanable to
rotate, and the central screw hole will be aligned with the hole in the spine.

// 3
Wall plate Wall plate cover Spine
Step 3
While supporting your MicroPod, place it on the Wallbracket base, so that the buds fit
into the holes in the bottom. Finish of by tightening the screw with the hexagon key
provided.

www.podspeakers.com
Designs and specifications are
subject to change without notice.