Precision AO-MOUNT2PK User manual

Manual
Magnetic Car and Laptop Phone Mount
(AO-MOUNT2PK)
Magnetic Laptop Mount Instructions
What’s in the Box:
1 x Mobile Mount
1 x Removable Tape
1 x Round Adhesive Metal Plate
Features:
60° extension
Magnetic Installation
Lightweight and Portable
Compatible with most phones and tablets

Laptop Mount Setup
1. Wipe clean the back surface of your laptop/screen
and phone case.
2. Peel off the film from the adhesive metal plate and place
it on the back of your phone case.
3. Peel off the paper from the adhesive strip and place it on
the back of your computer as shown.

Magnetic Car Mount Instructions
What’s in the Box:
1 x Car Air Vent Mount
1 x Round Adhesive Metal Plate
Features:
Magnetic Installation
Strong Magnetic Holder
Sturdy Air Vent Mount
Compatible with most phones

WARRANTY
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have
the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Car Mount Setup
1. Wipe clean the back surface of your phone case.
2. Peel off the film from the adhesive metal plate and
place it on the back of your phone case.
3. Install the holder on the air vent outlet.
4. Put your phone on the holder.