Prestigio PJ-MSL2B User manual

High Performance Mouse EN-1
PackageContents
1. Prestigio Mouse Main Unit
2. Quick Guide 3. Warranty Card 4. AAA Alkaline Battery X 2
Product Overviews
Top View Button View
Getting Started
zRemove battery cabinet cover at
the button of device.
zInsert batteries as indicated on
the diagram attached.
zFit in battery cabinet cover.
zSlide power switch to ON
position.
NOTE:
Low power LED blinks for 3 seconds
if the device is powered on.
zTurn on PC or notebook.
zInsert Bluetooth Dongle (not
included) into PC or notebook if
necessary.
zPush ID reset button at the
bottom of the device to start
Bluetooth pairing process.
EN

EN – 2High Performance Mouse
zClick on Bluetooth Icon to
launch Bluetooth Control panel.
zClick on Add button to add new
Bluetooth device.
zCheck on My device is set up
and ready to be found option
and click on Next button to
start wizard.
zSelect Bluetooth Mouse figure
and click on Next button to
continue.
zClick on Search Again button
and push ID reset button at the
bottom of the device if no such
option is displayed.
zCheck on Don’t use a passkey
option and click on Next button
to start pairing.
zUpon successful pairing, click on
Finish button to complete
process.
1. Press DPI switch to toggle
between DPI 800/1600 modes.
2. Slide scrolling wheel to
fast-scroll between pages.
3. The Low power indicator will be
illuminated in red if batteries
are in need to replacement.
NOTE:
The device automatically enters
sleep mode when not used. Click
any button to recall normal
function.
EN
3
1
2

High Performance Mouse EN-3
Cautions
zDo not direct the laser beam at eyes at all times.
zDo not attempt to disassemble or alter any part of the device
that is not described in this guide.
zDo not place the device in contact with water or any other liquids.
The device is NOT designed to be liquid proof of any sort.
zIn the event of liquid entry into interior of device, immediately
disconnect the device from the computer. Continuing use of the
device may result in fire or electrical shock. Please consult your
product distributor or the closest support center.
zTo avoid risk of electrical shock, do not connect or disconnect the
device with wet hands.
zDo not place the device near a heat source or directly expose it
to flame or heat.
Technical Specifications
Model Name PJ-MSL2B
Lens Laser Lens
Light Source Laser Diode with Built-In Sensor
Resolution 800/1600 DPI Switchable
Report Rate 100 cycle/second
Connection Type Bluetooth Class 2 2.4GHz Technology
Transmission Distance 6~8M
Sensitivity ~ -85dbm
Channel/ID 79 Channels
OS Supported Windows XP(32bit)/Vista
Power Source Alkaline Battery AAA X 2
Power Consumption
zOperation Mode：< 13 mA
zSleep Mode 1: 1.5 mA
zSleep Mode 2 :0.5 mA
Weight 100g
Dimensions (mm) 109(L) X 66.0(W) X 38.5(H)
EN

EN – 4High Performance Mouse
Technical Support and Warranty Information
Please refer to www.prestigio.com for technical support and included
warranty card for warranty information.
Disclaimer
We make every effort to ensure that the information and procedures in
this user manual are accurate and complete. No liability can and will be
accepted for any erros or omissions. Prestigio reserves the right to make
any changes without further notice to any products herein.
EN