Pro-Line Boats 2010 20 Express User manual

2010
20 EXPRESS
Owner’s Manual
Specifications subject to change without notice. Actual boats may vary from drawings and/or photos.
Copyright 2005 Pro-Line Boats Inc., PO Box 1348, Crystal River, FL 34423
All rights reserved. July 15, 2009

ii

iii
Table of Contents
Page
Introduction
Specifications ....................................................................................................... 1
Customer Responsibilities...................................................................................... 1
Dealer Responsibilities.......................................................................................... 2
Capacity Information ............................................................................................. 2
Insurance and Registration .................................................................................... 2
Owner’s Package.................................................................................................. 2
Warranty.............................................................................................................. 3
Safety
Carbon Monoxide.................................................................................................. 5
Emergency Treatment for CO Poisoning....................................................... 5
Where CO May Accumulate........................................................................ 6
How To Protect Others and Yourself............................................................ 6
Fire...................................................................................................................... 7
Equipment............................................................................................................ 7
Flooding............................................................................................................... 7
Hazardous Conditions ........................................................................................... 8
Passenger Safety.................................................................................................. 8
Regulations.......................................................................................................... 8
Rules of the Road ................................................................................................. 8
Alcohol................................................................................................................. 9
Controls
Throttle and Shift Controls ..................................................................................... 10
Ignition – Binnacle, Forward, Neutral and Reverse Gear Operation................. 10
Key Switch Alarm....................................................................................... 10
Lanyard Stop Switch................................................................................... 10
Shift / Throttle / Trim.............................................................................................. 10
Steering
.............................................................................................................. 11
Steering – Hydraulic ................................................................................... 11
Power Trim................................................................................................ 11
Steering Wheel .......................................................................................... 11
Systems and Accessories
Electrical System .................................................................................................. 12
12-Volt Receptacle (Optional)...................................................................... 12
Circuit Breakers ......................................................................................... 12
Switch and Breaker Panel........................................................................... 12
Lighting Systems................................................................................................... 14
Baitwell Light ............................................................................................. 14
Navigation and Anchor Lights...................................................................... 14
Spreader Lights and Courtesy Light (Optional).............................................. 14
Cabin Lights............................................................................................... 14
Cockpit Lights (Optional)............................................................................. 15
Instrumentation..................................................................................................... 15
Compass................................................................................................... 15
Horn.......................................................................................................... 15

iv
Page
Full Instrumentation / Analog Gauges (Digital – Verado) ................................ 15
Fuel/Oil Systems................................................................................................... 16
Vented Fuel Fill Fitting................................................................................ 16
Fuel Tank.................................................................................................. 16
Fuel Sender and Fuel Pick Up..................................................................... 17
Fuel Water Separator ................................................................................. 17
Primer Bulb................................................................................................ 17
Oil Tank and Fill......................................................................................... 17
Fuel / Oil Leaks.......................................................................................... 18
Head Waste System.............................................................................................. 18
What is the Law?........................................................................................ 18
Porta-Potti with Filler Board (Optional).......................................................... 18
Sea Water System................................................................................................ 18
Bilge Pump................................................................................................ 18
Baitwell and/or Washdown Pump................................................................. 19
Fish Box.................................................................................................... 20
Storage, Hatches, Windows and Doors................................................................... 20
Storage ..................................................................................................... 20
Hatches and Latches.................................................................................. 20
Windows ................................................................................................... 22
Cabin / Companionway Door....................................................................... 22
Seating ................................................................................................................ 22
Hardware ............................................................................................................. 23
Thru Hull Fittings........................................................................................ 23
Cleats ....................................................................................................... 23
Grab Rails ................................................................................................. 24
Bow Rail.................................................................................................... 24
Gunwale Trim / Rubrail ............................................................................... 24
Anchor Roller and Rope Locker Storage....................................................... 24
Drain Plug ................................................................................................. 24
Cockpit / Deck Drains ................................................................................. 24
Half Dive Platform with Ladder..................................................................... 24
Cabin Interior........................................................................................................ 24
Cabin V-Berth............................................................................................ 24
Upholstery................................................................................................. 25
Bimini Top (Optional)............................................................................................. 26
Hard Top with Storage Box (Optional)..................................................................... 26
Electronics (Optional)............................................................................................ 26
Bonding System.................................................................................................... 26
Operation and Performance
Trim / Tilt.............................................................................................................. 27
Propellers............................................................................................................. 27
Starting................................................................................................................ 28
Before Starting the Engines ........................................................................ 28
Starting the Engines .................................................................................. 28
After Starting the Engines ........................................................................... 28
Fueling................................................................................................................. 28
Before Fueling ........................................................................................... 28
While Fueling............................................................................................. 29

v
Page
After Fueling .............................................................................................. 29
Loading................................................................................................................ 29
Trailering and Launching
Selecting A Trailer................................................................................................. 30
Check Before You Go Out On The Highway............................................................ 30
Backing A Trailer................................................................................................... 31
Pre-Launching Preparations................................................................................... 32
Launching ............................................................................................................ 32
Retrieval............................................................................................................... 32
Storage................................................................................................................ 33
Service and Care
Fiberglass and Gelcoat.......................................................................................... 34
Epoxy Barrier Coat and Bottom Paint........................................................... 34
Graphics .............................................................................................................. 35
Gunwale Trim / Rubrail.......................................................................................... 35
Water Pumps........................................................................................................ 35
Fuel Water Separators........................................................................................... 35
Compass.............................................................................................................. 35
Aluminum............................................................................................................. 36
Stainless Steel...................................................................................................... 36
Corrosion Protection.............................................................................................. 37
Cabin / Companionway Door.................................................................................. 37
Windows.............................................................................................................. 37
Windshield ........................................................................................................... 37
Curtain Package and Windscreen........................................................................... 38
Canvas...................................................................................................... 38
Isinglass.................................................................................................... 39
Vinyl .................................................................................................................... 39
Interior....................................................................................................... 39
Exterior ..................................................................................................... 39
Cloth.................................................................................................................... 39
Cabin Cushions and Bolsters....................................................................... 39
Winterizing and Storage......................................................................................... 40
Resealing............................................................................................................. 40
Additional Cleaning and Maintenance Products ....................................................... 41
Appendix
Helpful Check Lists ............................................................................................... 42
Each Time You Go On A Boat Trip............................................................... 42
Once A Month............................................................................................ 42
Once A Year.............................................................................................. 42
Boat Identification Information................................................................................ 43
Trouble Shooting Chart.......................................................................................... 44
While we endeavor to be as accurate as possible, certain changes in standard equipment, options and the like may
have occurred which would not be included in the Owner’s Manual. All weights and fuel capacities are estimates and
could/will vary with each vessel and with each application. In all cases, consult your local Pro-Line dealer for the
most current information.

1
Introduction
Congratulations on the purchase of your new Pro-Line Boats 20 Express sport fishing boat. Welcome into the
proud family of satisfied Pro-Line owners. Every expedition lets you enjoy the outstanding features designed into
every boat we construct. Your new Pro-Line is more than just a boat, it's a whole new lifestyle.
Pro-Line's commitment to the needs and wishes of the sport fishing family has resulted in a superior fishing craft
providing you with comfort, performance, security, and outstanding fishability. All of our boats comply with U.S.
Coast Guard (USCG) safety regulations and are designed and crafted in accordance with the National Marine
Manufacturers Association (NMMA), the American Boat and Yacht Council (ABYC) standards, and the Common
European directive (CE).
This manual (to be kept onboard your Pro-Line) is designed to provide you with information necessary for the
safe, efficient operation and care of your new Pro-Line. Take the time now to carefully review the owner’s manual
and the additional information in your owner’s package to maximize your enjoyment and safety as well as
familiarize yourself with your new boat.
We have prepared this manual to help you fully enjoy each voyage while operating your boat safely. While the
information in the manual cannot and does not cover every boating situation, we urge you to read this manual
carefully and familiarize yourself with the boat before using it. If a specific method or procedure is not
recommended, you must make sure that whatever action you take is safe for you, your passengers and others on
the water. Always use common sense when boating.
Specifications
Length Overall (LOA) 20’ 6” Bridge Clearance
Beam 8’ 5” w/ Bimini Top Down 5’ 10”
Draft (Hull) 15” w/ Hard Top 8’ 5”
Deadrise 19 degrees Maximum Horsepower 200 hp
Weight Fuel Capacity 70 gal.
Hull – w/o Engines 2,750 lbs. Baitwell Capacity 27 gal.
Trailerable 3,950 lbs. Fishbox Capacity (2) 27 gal.
Cockpit Area 47 sq. ft. Porta-Potti Capacity 2.8 gal.
Cockpit Depth 22”
Customer Responsibilities
Review and sign the Pre-Delivery Inspection (PDI) report for the boat and motors with your dealer
to ensure that your boat is in top condition when you take delivery.
Examine the boat at time of delivery to insure that all systems and components are functioning
safely and properly. Report any outstanding issues (i.e., scratches, missing items, etc.) to your
dealer before or during the delivery of the boat.
Read all literature and instructions to ensure proper usage and operation of the equipment as well
as how to use and maintain all equipment as directed.
Read and understand the limited warranty. Sign the warranty registration card and mail it to Pro-
Line Boats.
Contact your local Pro-Line dealer for assistance with any warrantable repairs.
Transportation of your boat to and from your dealer or repair facility for warrantable repairs.
Schedule your 20-hour boat and engine check up with your dealer.
Know your boat and the rules of the road before you use your boat.
Be proficient in boat handling and safety. This manual is not intended to provide complete
training on all aspects of general boat operations. We at Pro-Line urge all boat owners
and operators to attend a boating safety course before operating a boat.

2
Dealer Responsibilities
Your dealer's responsibilities include but are not limited to:
Pre-delivery verification of proper rigging and operation. Deliver the boat in water ready condition
unless you and your dealer have agreed upon other arrangements.
Complete the pre-delivery checklist with the customer at the time of delivery.
Provide adequate orientation in the general operation of your Pro-Line including an explanation of
the specific safety considerations regarding the use of the systems and components.
Provide an explanation of the owner’s package and literature, including the warranty registration
cards for the vessel, engines and all of the separately warranted equipment and accessories.
Discuss the terms of all warranties and emphasize the importance of registering each warranty
with the specific manufacturers.
Repair any damages that may have occurred to the boat while the boat has been in the dealer’s
possession.
Provide service to Pro-Line boat owners within the locality of the dealership.
Explain local and out of area service procedures during and after the warranty periods.
Capacity Information
In accordance with the National Marine Manufacturers Association
(NMMA) and the American Boat and Yacht Council (ABYC), all boats
26 feet in length or less are required to display a capacity plate. Your
20 Express is rated for the following capacities.
Maximum capacity of persons may not exceed 7
passengers. The combined weight of those
passengers may not exceed a total combined weight of
1,000 pounds.
Total weight including passengers, motor and gear may
not exceed 1,700 pounds.
Maximum horsepower is not to exceed 200.
These capacity standards are based on Standards and Recommended
Practices for Small Craft published by the National Marine
Manufacturers Association (NMMA).
Insurance and Registration
As the owner of the boat, you are legally responsible for all liabilities of
operation. Secure insurance protection with a reputable insurance
company through your local insurance agent.
Learn about and operate your boat in accordance with local, state, and
federal laws, regulations, and registration requirements.
Owner’s Package
Each Pro-Line boat comes with an Owner’s Package that contains this Owner’s Manual along with materials
supplied by various manufacturers whose products have been installed on your boat. Manufacturers of certain
products (i.e., Stereo, TV, Stove, Refrigerator, Microwave, Engines, Electronics, etc.) provide their own limited
warranty and owner’s manuals. While we have endeavored to be as accurate as possible in this manual, if you
should notice a discrepancy between the information in this manual and that of the individual supplier’s manual,
always follow the instructions in the supplier’s manual.
Make sure that you complete the individual warranty cards for these products and forward them on to the
respective manufacturers to register for your warranty with them. Retain all materials in your Pro-Line Owner’s
Package for easy reference.

3
Warranty
The Pro-Line Boats Limited Warranty is attached to the warranty card. After signing the warranty card, your
dealer will provide you with your copy of the warranty and mail the warranty card to Pro-Line Boats, Inc. A copy
of the Pro-Line Boats Limited Warranty is also included in this chapter.
The Pro-Line Boats Limited Warranty extends only to parts that were factory installed. Dealer installed items are
the responsibility of the dealer. All warrantable repairs are to be completed by an authorized Pro-Line dealer.
Your dealer should be able to assist you with any service or warranty related issues.
If for any reason you are dissatisfied with the services performed by your dealer, we suggest that you discuss the
matter with the service manager. The service manager is responsible for the quality of service being performed
and has a direct interest in resolving your issues to your satisfaction. If the matter is complicated and cannot be
resolved to your satisfaction by the service manager, we suggest that you talk to the general manager or owner.
In most cases a compromise can be reached.
If the matter cannot be resolved by the dealership to your satisfaction, contact the Pro-Line Boats Customer
Service Department by calling 352-795-4111 or by writing to the Pro-Line Boats, Customer Service Dept. at:
PO Box 1348, Crystal River, FL 34423-1348
FAX: [phone]
So that your dealer and we can provide you with the best possible service, please have the following information
available when calling or writing:
HIN (Hull Identification Number)
Selling dealer’s name and location
Servicing dealer (if different from selling dealer)
Nature of problem
Record of service performed and approximate dates
Names of dealership personnel involved with the situation
When contacting Pro-Line Boats, please keep in mind that your issue will most likely be resolved at the
dealership, using their facilities, equipment, personnel and/or sublet repair facilities.
Note: There are items that are not covered by the Pro-Line Boats Limited Warranty, including but not limited to
the following:
Incidental and consequential damages (i.e., storage charges, telephone or rental charges of any
type, inconvenience or loss of time or income).
Damage caused by neglect, lack of maintenance, accident, abnormal operation, improper
installation or service.
Haul-out, launch and towing charges.
Transportation charges, service call charges and/or travel time to and from a repair facility,
customer’s home or marina.
Service requested by customer other than that which is necessary to satisfy the warranty
obligation.
Oils, lubricants or fluids used in normal maintenance.
Air freight, next-day or second-day air, or any special delivery fees unless pre-approved.
Gelcoat cracking, chalking, crazing, discoloration, yellowing or blistering.
Hull blisters that form below the water line: Osmosis blistering is not covered by our limited
warranty. The phenomenon of osmotic blistering is known to occur in salt water, brackish water
and/or fresh water. Any boat left in the water for any period of time is susceptible. Most marine
bottom paint manufacturers offer coatings that help protect the hull against osmosis blistering.
We highly recommend that you add a protective coating to your hull. Find out which type of
bottom paint is recommended for your area and have an epoxy barrier coat and bottom paint
applied by a professional.
Parts not installed by the factory

4
The Ten Year Limited Hull Structural Warranty is transferable to subsequent owners for a nominal fee. Please
contact your dealer or Pro-Line Boats to obtain the applicable transfer form so that the new owner will have piece
of mind knowing that their pre-owned boat comes with the same structural hull warranty protection that was
afforded to the original owner.

5
Safety
Your Pro-Line boat has been constructed with safety in mind. But, remember, boating safety and the safety of
your passengers is YOUR ultimate responsibility. You should fully understand the operations of your vessel as
well as the basics in boating safety.
Your local U.S. Coast Guard Auxiliary (USCGA) and the U.S. Power Squadrons (USPS) offer excellent safe
boating classes several times a year. If you have not already passed a boating safety course, we recommend
that you do so at your earliest convenience.
Plan your trips carefully. Insure ample fuel supply and a reserve. Tell someone where you are going and when
you expect to return. Keep current charts onboard. Read USCG boating safety circulars and follow the safety
guidelines.
Carbon Monoxide
Be aware of and avoid conditions that can cause Carbon Monoxide poisoning (see USCG boating safety circular
77). Sources of Carbon Monoxide (CO) include any gas or diesel engine and any flame from items such as a
charcoal grill, stove or heater. Carbon Monoxide can accumulate to deadly levels in enclosed spaces. Always
ventilate occupied areas of the vessel with fresh clean air.
In high concentrations, CO can be fatal within minutes. The effects of CO in lower concentrations are cumulative
and can be just as lethal over long periods of time. CO poisoning is often confused with seasickness. So be
aware of the following CO symptoms: Itchy and watery eyes, flushed appearance, throbbing temples, inability to
think coherently, ringing in the ears, tightness across the chest, headaches, drowsiness, nausea, dizziness,
fatigue, vomiting, collapse and convulsions.
Do not stand or swim near the motor when the engine is idling.
Carbon monoxide can harm and even kill you inside or outside your boat!
Did you also know:
CO symptoms are similar to seasickness or alcohol intoxication?
CO can affect you whether you're underway, moored or anchored?
You cannot see, smell or taste CO?
CO can make you sick in seconds? In high enough concentrations, even a few breaths can be
fatal.
Most important of all, did you know CO poisonings are preventable? Every boater should be aware of the risks
associated with CO - what it is; where it may accumulate; and the symptoms of CO poisoning. To protect
yourself, your passengers and those around you, learn all you can about CO.
Emergency Treatment for CO Poisoning
CO poisoning or toxicity is a life-threatening emergency that requires immediate action. The following is a list of
things that should be done if CO poisoning is suspected. Proceed with caution. The victim may be in an area of
high CO concentration, which means that you or others could also be in danger from exposure to CO.
Evaluate the situation and ventilate the area, if possible.
Evacuate the area and move affected person(s) to a fresh air environment.
Observe the victim(s).
Administer oxygen, if available.
Contact medical help. If the victim is not breathing, perform rescue breathing or approved
cardiopulmonary resuscitation (CPR), as appropriate, until medical help arrives. Prompt action
can mean the difference between life and death.

6
Shut off potential sources of CO, if possible. Correct ventilation problems and/or repair exhaust
problems as appropriate. Investigate the source of CO and take corrective action, such as
evacuating and ventilating the area, or shutting off the source of the CO while at the same time
evacuating and ventilating the area.
Where CO May Accumulate - Carbon Monoxide can accumulate anywhere in or around your boat as
shown in the following pictures:
Inadequately ventilated canvas enclosures.
Exhaust gas trapped in enclosed places.
Blocked exhaust outlets.
Another vessel's exhaust. CO from the boat docked next to you can be
just as deadly.
"Station wagon effect" or back drafting.
At slow speeds, while idling, or stopped. Be aware that CO can remain in
or around your boat at dangerous levels, even if your engine or the other
boat's engine is no longer running!
How to Protect Others and Yourself
You are in command of your boating safety. Follow these simple steps to help keep Carbon Monoxide from
poisoning you, your passengers or others around you.
Know where and how CO may accumulate in and around your boat.
Maintain fresh air circulation throughout the boat at all times. Run exhaust blowers whenever the
generator is operating.
Know where your engine and generator exhaust outlets are located and keep everyone away
from these areas.
Never sit, teak surf or hang on the back deck or swim platform while the engines are running.
(Teak Surfing is a new and dangerous boating fad that involves an individual holding on to the

7
“teak” swim platform of a vessel while a wake builds up then lets go to body surf on the wave
created by the boat; hence the term - Teak Surfing.) Teak surfing is never a safe activity.
Never enter areas under swim platforms where exhaust outlets are located unless the area has
been properly ventilated.
Although CO can be present without the smell of exhaust fumes, if you smell exhaust fumes, CO
is also present. Take immediate action to dissipate these fumes.
Treat symptoms of seasickness as possible CO poisoning. Get the person into fresh air
immediately. Seek medical attention unless you are sure it is not CO.
Install and maintain CO alarms inside your boat. Do not ignore any alarm. Replace alarms as
recommended by the alarm manufacturer.
Get a Vessel Safety Check. A VSC is a free bow-to-stern safety examination.
Fire
Be aware of and avoid conditions that can lead to accidental fire.
Guard against and watch for fuel spills and leaks.
Inspect wiring for damage or exposure that could lead to short circuits or arcing.
Make sure those who smoke are careful to avoid accidental fire ignition.
Do not allow smoking while fueling.
Keep a USCG approved fire extinguisher on board at all times.
Inspect the fire extinguisher regularly, learn how to use it properly and instruct others as well.
Use water to fight a fire as a last resort after making arrangements to abandon the boat if a fire
should get out of control.
Keep the following in mind if a fire is burning out of control and you must abandon the boat:
oAbandon the boat into the wind to minimize burn risk from floating fuel.
oWear a PFD unless you must swim under burning fuel.
oIf swimming under burning fuel, throw a PFD outside of the burning area and
swim under the burning fuel to it.
Equipment
USCG regulations require that you have the following Coast Guard approved equipment onboard while operating
your boat:
Fire extinguisher(s)
One throwable Sound signal device PFD
Sight signal device approved for day and night use when in coastal waters or the great lakes
Personal Flotation Device (PFD) for each occupant
Navigational lights if operated at night
In addition, here is a list of suggested equipment you should have aboard your Pro-Line:
First aid kit and blankets

Anchor and sea anchor with sufficient line
Mooring lines and fenders

Bailing device
Combination oar/boat hook

Tool kit and lubricant
Spare prop and hardware

Spare fasteners, hose clamps and plugs
Spare fuses and bulbs

Binoculars
Local charts and compass

Waterproof flashlight and spare batteries
2 way radio

EPIRB (emergency beacon)
Floating key chain and spare keys

Navigation device
Emergency food and water

Waterproof matches or lighter
Flooding
Be aware of and avoid conditions that can cause your boat to flood with water. Possible causes of flooding
include:

8
Damage to the hull or thru-hull fitting

Water entering cockpit due to improper loading
Waves washing into the boat

Failure to properly install the drain plug.
The boat will become flooded and may swamp, capsize or sink if water enters the boat faster than the bilge pump
can expel it.
Hazardous Conditions
Keep track of weather developments and avoid hazardous conditions whenever possible. When forced to
operate your Pro-Line in storm conditions:
Wear PFD's.
Stow loose gear and equipment.
Place heavy items as low as possible.
Head for the easiest port to reach a safe location.
Reduce speed. You are moving too fast if the boat leaves the water.
If power fails, anchor or rig a sea anchor off the bow (an empty ice chest in a pinch).
Stay with the boat if it capsizes, unless it is burning out of control.
Passenger Safety
You are responsible for the safety and conduct of your passengers. Make sure that:
You instruct your passengers on the proper use and location of PFD's. Children and non-
swimmers should wear one at all times.
Each passenger is in a safe location when underway and knows to keep the boat balanced.
At least one other person knows how to operate the boat in case of an emergency.
Your passengers are aware of propeller dangers and the possibility of sudden maneuvers
and jolts.
The engine is turned off and the key is removed when swimmers are near the prop or
using the dive platform.
All passengers keep away from lines under stress in case they break and recoil.
Regulations
The USCG is the authority of all waterways. Local authorities enforce State Boating Regulations. You are
subject to marine traffic laws and "Rules of the Road" for both federal and state waterways. Therefore, you must
submit to boarding if requested by the proper authority. There are many publications available from the Coast
Guard concerning regulations. Call the United States Coast Guard Info Line at (800)-368-5647 for additional
information.
Rules of the Road
Know and use the “Rules of the Road”. Your boat is subject to U.S. Coast Guard enforced marine traffic laws
known as “Rules of the Road.” There are two sets of rules: the US Inland Navigation Rules and the International
Rules. The latter rules are applicable to all vessels inside the demarcation lines separating inland and
international waters. You may obtain a copy of the rules from any of the following and by requesting the
publication titled “Navigational Rules, International - Inland.”
Your local USGC
The United States Coast Guard Info Line (800)-368-5647
The USCG Headquarters by logging on to uscg.mil
The information here is only a “brief” overview. Please contact the USCG for detailed information.

9
Audible warning signals:
oOne short horn blast: starboard course change.
oTwo short horn blasts: port course change.
oThree short horn blasts: astern operation.
oFive horn blasts: doubt about previous signal or danger.
oA Five-second horn blast every minute: for fog operation.
When overtaking, give-way vessel announces intention with horn blast(s) and waits for a
response, then completes maneuver.
When approaching head-on, both boats give way after giving appropriate horn blast(s) (preferably
to starboard).
When crossing, a vessel converging from starboard has the right-of-way. Port vessel gives way
(both acknowledge with one short horn blast).
Know and observe navigational buoys and markers.
Give way to craft under sail.
Alcohol
Don't drink and drive. If you have been drinking, appoint someone who is an experienced boater and has not
been drinking to be the designated driver. Never operate a boat under the influence of drugs or alcohol.
Operation of motorized vessels while under the influence is a Federal offense carrying a significant penalty.

10
Controls
Controls and engine systems vary greatly from one engine manufacturer to another. Please read your engine
owner’s manual carefully.
Note: If your engine package was not factory installed, some components that are normally
standard installations may not be included.
Throttle and Shift Controls
Ignition – Binnacle, Forward, Neutral and Reverse Gear Operation
The binnacle on the 20 Express is located at the console forward of the helm
seat. To ensure that the binnacle is working properly, shift the binnacle forward
to put the engine in forward gear. Make sure the engine shifts smoothly into
idle with no grinding of the gears. Bring the binnacle back into neutral and
repeat the same process while going into reverse. Again, ensure that there are
no gears grinding. It is important to check the binnacle at wide-open throttle
(WOT) to ensure the binnacle is not stiff and operates smoothly while going into
the WOT position.
Actual binnacle will vary depending upon the engine package that was selected.
Key Switch Alarm
The key switch alarm is located in the binnacle and sounds when the ignition key is turned on. The key switch
alarm is actually is a warning alarm that goes off when any overheating problems may occur with the engine. To
check the key switch alarm, turn the ignition key to the right but do not start the engine. The alarm will sound
ensuring that the engine warning alarm is working properly. When finished, turn the key off.
Lanyard Stop Switch
To ensure the lanyard stop switch (also called the emergency stop feature) on the engine works properly, first turn
on the ignition key and start up the engine. While the engine is running, locate the lanyard stop switch. The
lanyard stop switch is installed in close proximity to the binnacle or the ignition key. While the engine is running in
the neutral position, pull the lanyard stop switch downward until the plastic element at the end of the lanyard pulls
the stop switch pin into the off position. This process will automatically stop the engine and will ensure that the
emergency lanyard stop switch is working properly.
Shift / Throttle / Trim
Your Pro-Line can be ordered with different shift/throttle systems based upon motor type. Refer to the owner's
packet to find the manual pertaining to your particular installation. Each motor has an individual tilt/trim switch
located on the port throttle lever. Separate shift and throttle controls are available for each outboard motor.

11
The throttle lever has three range positions: “Forward”, “Neutral”, and “Reverse”. The shift function occurs in the
first portion of the lever travel. After the transmission is shifted into gear, further movement of the lever advances
the throttle.
Push the throttle lever ahead to move forward and pull it back for reverse. Centralize the lever to the detent
position for neutral. The throttle lever is equipped with a neutral safety switch to prevent the motor from starting in
gear. The initial short movement of the lever to engage the transmission should be made firmly to avoid causing
gear clash.
CAUTION: Use care in shifting to avoid advancing the throttle more than intended.
Steering
Steering systems will differ depending upon your selection of engine package. Please carefully read the owner’s
manual provided by the specific manufacturer.
Check your particular engine specifications for details specific to your engine package. Always follow the engine
manufacturers recommendations relating to the care and maintenance of their product.
Steering - Hydraulic
Your Pro-Line is equipped with a self-contained hydraulic steering system when your engine is factory installed.
When the steering wheel is turned, the helm pump pumps fluid to the steering cylinder causing it to extend or
retract. Periodically, check the fluid level and fill as necessary. Beware of adding too much fluid, especially if the
ambient temperature is cold because subsequent expansion could cause leaking or damage to your system.
Refer to the owner’s manual that was provided by your engine manufacturer.
After every 24 hours of operation check all nuts, caps, and hose fittings for tightness. Make sure the hoses are
not chafing or kinking on sharp corners. Also, check that hose ends are not damaged or distorted. The fluid
should be changed annually under normal conditions and every six months during times of heavy usage. If your
steering does not operate properly, check the following:
Drive entanglements

Hoses and/or fittings for leaks
Level of the hydraulic steering fluid

Air in the steering system.
To properly check the steering system on the 20 Express, start by turning the steering wheel port to starboard. If
the engine does not respond the same time as the steering wheel is being turned, this means that there is air in
the steering system and the steering system needs re-bleeding. When there is air in the steering, the steering
wheel will feel “loose”. Contact your dealer to have them bleed the steering system.
Power Trim
The power trim unit is located on the engine and can be operated by using the trim button on the engine or by
using the trim toggle switch on the binnacle. To ensure the power trim is working, start by pressing the toggle trim
switch in the up position and trim the engine to the full up position. Repeat the same process by pressing the trim
toggle switch down and the engine will go into the full down position. See the Trim and Tilt information in the
Operations section of this manual.
Steering Wheel
The stainless steel steering wheel is mounted at the helm along with the
binnacle, switch panel and other controls. Please refer to the Care and
Maintenance section of this manual for cleaning recommendations.

12
Systems and Accessories
Electrical System
12 Volt Receptacle (Optional)
A 12-volt receptacle can be installed on the console. It is easily accessible and can be used to charge your cell
phone, operate a hand held remote spotlight, etc.
Circuit Breakers
Circuit breakers and/or fuses protect the wiring. In the event a device stops working,
check to see if the circuit breaker is tripped or if the fuse is blown. The circuit
breakers are installed in the following locations:
The circuit breaker panel is located beneath the starboard jump seat and is
accessible via the hatch installed on top the seat (some models vary in color).
The main breaker (30 amp) is installed at the bottom of the circuit breaker
panel.
Breakers and/or fuses for the aft bilge, stereo and accessory are installed
above the main breaker.
Additional breaker switches are also located on the switch panel beneath the
individual switches. See the Switch and Breaker Panel information later in
this section for additional information.
A tripped breaker will protrude or move from its set position indicating that the circuit has been overloaded. Turn
off the device(s) on the circuit, then reset the breaker by pushing in once or by returning a breaker switch to the
on position. If the breaker does not reset or if it resets and then trips again after the device is turned back on,
then a short circuit exists or your device may be damaged, overloaded, or faulty. Correct the problem and then
reset the breaker.
If the breaker continues to trip and you are certain the device, switch and wiring are in good repair; either the
breaker is faulty or it is too small for the load. Reduce the load or replace the breaker.
Switch and Breaker Panel
The switch and breaker panel is located on the console. The numbers shown below each switch in the photo
correspond with the descriptions provided for each switch:
1 2 3 4 5 6 7 8 9 10
1 Horn - The horn is used to signal, warn, or alert other boats, swimmers or people on shore. Depress
the horn switch to the up or forward position to activate the horn. Release the horn switch to
deactivate the horn. Using different sequences of horn blasts indicates different and sometimes
dangerous situations to you or someone around you.
Avoid any horn use without an appropriate purpose. See the Safety Section in this manual and/or take
a safe boating course for more information on the proper use of the horn.

13
2 Navigation/Anchor Lights - Locate the Nav/Anc. light switch on the instrument panel. This 3-way
switch (forward, middle, back/aft) functions as follows when you press the switch:
Forward position - Turns on the bow lights and the anchor light. This position will also
activate the red light in your compass.
oIf you have Faria gauges on the dash panel, this function will
illuminate the gauge lights.
oIf the gauges were provided by the engine manufacturer (i.e., Mercury,
Honda, etc.), your gauge lights will be illuminated when the ignition
switch is turned on.
Middle position – All lights are off.
Back/Aft position – Anchor light is on; bow and gauge lights are off.
3 Bilge Pump - Your boat is equipped with an aft bilge pump. This 500-gph pump is located in the aft
bilge and the automatic float switch is mounted in close proximity to the pump.
The aft bilge pump is wired automatic to the battery and has a manual override located at the switch
panel on the console. The automatic float switch is wired directly to the Starboard battery terminal
through a breaker or inline fuse. The circuit breaker for the aft bilge pump is located at the helm next
to the manual switch. Depressing the aft bilge pump switch to the up or forward position activates the
bilge pump.
4 Baitwell Pump – This switch operates the baitwell and raw water washdown systems. The baitwell
aerator head and the washdown fitting both have a small lever that must be in the open position before
operating the pump. Please refer to the section titled Sea Water System for additional instructions.
The baitwell and/or raw water washdown pump is located in the bilge area and is plumbed to a
seacock (ball valve). For the pump to operate properly you need to make sure the seacock is in the
open position. The seacock is wide open when the yellow seacock lever is vertical. When the yellow
seacock lever is horizontal, the seacock is closed.
The underside of the seacock thru hull is equipped with a scoop to allow the water to be picked up
even when the boat is on plane. When the boat is not in the water or the baitwell pump is not going to
be used for an extended period of time, the seacock valve should be in the closed position. To activate
the pump, depress the switch to the up or forward position. To turn the pump off after the baitwell tub
is full, depress the switch to the down or aft position.
5 Fresh Water - Switch and breaker panels are sometimes used on several different boat models. The
fresh water system is not available on this model; however, this switch may be used for an additional
dealer installed accessory. Please check the amp rating of any new component and/or additional
accessory before installation.
6 Cockpit Lights - Your boat may be equipped with optional cockpit/courtesy lights. The lights have LED
(light emitting diode) bulbs with a lifespan of approximately 10,000 hours. To activate the lights,
depress the switch to the up or forward position. The lights give off a soft warm light which should not
affect your night vision, but will still provide you with enough light to move around your cockpit safely in
low visibility conditions.
7 Baitwell Light - To activate the baitwell light, depress the switch to the up or forward position. This will
activate the LED (light emitting diode) light inside your baitwell tub. It is a soft white light that will keep
your bait moving and lively. It will also help you locate your bait on those early morning or late night
fishing trips. To turn the light off, simply depress the switch to the down or aft position.
8,9, 10 Accessory - These 5 amp switches can be used for additional dealer installed accessories. Please
check the amp rating of any new component and/or additional accessory before installation.
You can access the backside of the switch and breaker panel via the hatch that is installed on the starboard aft
cabin wall.

14
Lighting Systems
Baitwell Light
The baitwell light switch is located on the switch panel and is labeled baitwell with a light symbol on the switch.
To turn on the baitwell light, press the switch forward and open the baitwell lid to see if the baitwell light is on.
Press the baitwell light switch to the down or aft position to turn off the light.
Navigation and Anchor Lights
The navigation/anchor lights are required to be used for operation at night or under low visibility conditions to
indicate your position to other boaters. Visually check the operation of your navigation/anchor lights and verify
that the lights are free from obstructions. You should check your lights monthly during optimum visibility
conditions.
When you are underway in low visibility conditions, you should have the Nav/Anc switch in the up
or forward position. This will activate the navigation lights, as well as your anchor light.
When you are anchored or in low visibility conditions, you should turn on the anchor light. Press
the Nav/Anc switch to the down or aft position to turn on the anchor light.
The U.S. Coast Guard requires that the anchor light be installed at the highest point on
the boat and must be secured in the up position when you are underway. Therefore,
based upon the optional top that you may have selected, this light will be installed as
follows:
Bimini top – At the forward edge of the motor well.
Hard top – On top of the fiberglass top (shown in photo).
The navigation lights consist of a pair of lights that are mounted at the bow of the
boat. The red light is installed on the port side and the green light is installed on the
starboard side.
Spreader Lights and Courtesy Light (Optional)
The installation of the optional spreader
lights and the dome shaped courtesy light
requires the optional hard top. The
spreader lights are mounted to the aft side
of the hard top frame, along the top edge.
The courtesy light is mounted to the bottom
of the hard top storage box.
Two push in switches for the spreader
lights and courtesy light are located on the
base of the courtesy light.
Spreader Lights Courtesy/Dome Light
To operate the courtesy light - Press the switch labeled courtesy once to turn on the white
courtesy light. When you press the same switch a 2nd time, the white courtesy light will be turned
off and the red courtesy light (for night vision) will turn on. Press the same switch a 3rd time to
turn off the red courtesy light.
To operate the spreader lights - The spreader light switch operates in the same manor as the
courtesy light but only needs to be pressed in once to be turned on and once again to be turned
off.
Cabin Lights
There is a bullet light installed in the cabin. Turn on the cabin light, by turning the base of the light counter
clockwise for on or clockwise for off. When you are finished using the lights, press the cabin light switch to the off
position.

15
Cockpit Lights (Optional)
The cockpit lights are small circular lights located in the aft cockpit area. Locate the 2-way
cockpit light switch on the switch panel and press the switch in the forward position to turn
on the cockpit lights. Press the cockpit light switch in the aft position to turn the lights off.
Instrumentation
Compass
The compass is located on the dash on top of the console. To ensure that
the compass light is working properly, press the Nav/Anc light switch in the
forward position to turn on the red LED light inside the compass. When
finished, turn the Nav/Anc light switch back to the middle/off position.
Please refer to the owner’s manual provided by the manufacturer of the
compass for operational procedures and for information related to the care
and maintenance of their product. When in doubt, always defer to the
compass manufacturer’s instructions and/or recommendations.
Horn
The horn switch is located on the switch panel and the horn device is located on the starboard side of the top cap,
in the walkaround area starboard of the console.
Depress the horn switch to the up or forward position to activate the horn, then release the horn switch to
deactivate the horn. The horn is used to signal, warn or alert other boats or persons on shore. Using different
sequences of horn blasts indicates different and sometimes dangerous situations to you or someone around you.
See the Safety section in this manual for more information. Avoid any horn use without an appropriate purpose.
Additional information regarding audible warning signals should be covered in a safe boating course.
Full Instrumentation / Analog Gauges (Digital – Verado)
All gauges are installed on the console but the configuration and specific location of your gauges will vary
depending upon the selection of the various optional engine packages. If your engine package includes the
standard analog gauges (i.e., Faria), the gauges will light up when the navigation lights are on.
Tachometer - To ensure the tach is working properly, simply turn the ignition key on and start the engine. While
the engine is idling, the tach should be reading in the proper RPM range recommended for the engine. Your
engine manual will indicate the appropriate RPM range. When you are running at wide-open throttle, the tach
should read near the top end of the recommended RPM range.
If the RPM gauge is reading correctly and the engine throttle settings are correct, the tachometer is operating
properly. If the tachometer is not reading correctly, refer to the manual provided by the manufacturer of the gauge
that was included in your owner’s package.
Speedometer - To ensure that the speedometer (Speedo) is working properly, get the boat on a planing speed
and check to see if the gauge is reading at the approximate running speed at which the boat is traveling.
Note: The speed-reading on the Speedo may vary a few mph from the actual speed that the boat
is traveling. Either a GPS or a radar gun can check the running speed.
Trim - To ensure the trim gauges/indicators are working properly, start by making sure the engine is trimmed all
the way down. Locate the trim gauge on the instrument panel and check to see if the level on the trim gauge is in
the full down position. As you trim the engine up, watch the trim gauge and ensure that it coincides with the
actual trim of the engine. When finished trimming the engine all the way up, the level on the trim gauge should
read in the full up position.