ProScan PLDED4897A User manual

Model:P LDED4897A

CONTENTS321033111234DISCFORMATSSPECIFICATIONTROUBLE-SHOOTINGGUIDETV Symptom

1*SAFETY PRECAUTIONCAUTION
•••
WARNING:PLACEMENT INFORMATIONSAFETY INFORMATIONRATING PLATE LOCATIONFCC STATEMENTSWARNING:CAUTION MARKING WAS LOCATED AT THE REAR OF THE APPARATUS.WARNING: TO REDUCE THE RISK OF ELECTRICSHOCK，DO NOT REMOVE COVER（OR BACK）NO USER SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICEPERSONNEL.The lightning flash with arrowhead symbol, within an equilateral triangle,is intended to alert the user to the presence of uninsulated“dangerous voltage”within the product's enclosure that may beof sufficient magnitude to constitute a risk of electric shock to persons.The exclamation point within an equilateral Triangle is intended to alert the user toThe presence of important operating andmaintenance (servicing) instructions in the literatureaccompanying the appliance.DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE. USE OF CONTROLS OR ADJUSTMENTS ORPERFORMANCE OF PROCEDURES OTHERTHAN THOSE SPECIFIED MAY RESULT INHAZARDOUS RADIATION EXPOSURE.
••
TO REDUCE THE RISK OF FIRE OR ELECTRICSHOCK, DO NOT EXPOSE THIS APPLIANCE TORAIN OR MOISTURE.TO REVENT FIRE OR SHOCK HAZARD, DO NOTEXPOSE THIS UNIT TO RAIN OR MOISTURE. DONOT PLACE OBJECTS FILLED WITH LIQUIDS ONOR NEAR THIS UNIT. SHOULD ANY TROUBLE OCCUR, DISCONNECTTHE AC POWER CORD AND REFER SERVICINGTO A QUALIFIED TECHNICIAN.Do not use this unit in places that are extremely hot, cold, dusty or humid. Do not restrict the airflow of this unit by placing itsomewhere with poor airflow, by covering it with a cloth, by placing it on bedding or carpeting. When connecting or disconnecting the AC power cord, grip the plug and not the cord itself. Pulling the cord may damage it and create a hazard. When you are not going to use the unit for a long period of time, disconnect the AC power cord. The rating plate is located on the rear of the unit.NOTE: This unit has been tested and found to comply with the limits for a Class B digital device, pursuantto Part 15 of the FCC Rules. These limits are designedto provide reasonable protection against harmful interference in a residential installation. This unit generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, thereis no guarantee that interference will not occur in a particular installation. If this unit does cause harmful interference to radio or television reception, whichcan be determined by turning the unit off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the unit and receiver. -Connect the unit into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.Changes or modifications to thisunit not expressly approved by the party responsible for compliance could void the user authorityto operate the unit.
••••
“HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.”

IMPORTANT SAFETY INSTRUCTIONS1)Read these instructions.2)Keep these instructions.3)Heed all warnings.4)Follow all instructions.5)Do not use this apparatus near water.6)Clean only with a dry cloth.7)Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (Including amplifiers) that produce heat.9)Do not defect the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A groundingtype plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your wall outlet, consult an electrician for replacement of the obsolete outlet.10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11)Only use attachments / accessories specified by the manufacturer.12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.13)Unplug this apparatus during lightning Storms or when unused for long periods of time.14)Refer all servicing to qualified service personnel. Servicing is required when the apparatushas been damaged in any way, such as the power cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.15)To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected.2

4
CONTROL REFERENCE GUIDE
REMOTE CONTROL
Universal Remote Code: 1218
1.STANDBY
To switch on the TV or make the TV into
standby mode.
2.MUTE
Press this button to mute or restore sound.
3.0-9
Allows you to change the channel of the TV.
4.
Switches back and forth between the current and
previous channels.
5.P.MODE
Press this button to select a picture mode for different
picture qualities.
6.S.MODE
Press this button to select sound setting for different
sound effects.
7.MTS
To change among STEREO, MONO and SAP. If there is no
second language available for the signal received, LED
Display audio will output to mono.
8.SLEEP
To select the amount of time before your TV turns
Off automatically.
9.SOURCE
Press this button to select an input source.
10.CH+/CH-
Skips to the next/previous channel on TV mode.
11.INFO
Show the information of the program you are watching.
12.VOL+/VOL-
Increases/Decreases the Volume control.
13.CC
Press the button to enter into the CC mode.
14.EPG
15.CH.LIST
Press this button to display the channel list.
16.AUTO
Press this button to autoadjust the screen in PC mode.
17.UP/DOWN/LEFT/RIGHT
Moves the cursor upward/downward/to the left/to the right
when making a selection.
18.ENTER
Press to confirm selections on a menu screen.
MENU
Displays the OSD Menu of the TV.
Exit
Press this button to exit the on screen display.
21.ADD/DEL
Press to increase/decrease your favourtite program.
22.
Press this button to select the electronic programme
guide in DTV mode.
19.
20.
FAV
Press this button to show the favourite list.
23. FAV+/FAV-
Press this button to go through the FAV channel list.

BACK VIEW

INITIAL SETUP13
1. Press the button on the remote control.2.and select any of them using the button orthebutton.Note:Before watching please make sure all necessarycables and devices are connected.ENTERUseor button to select the optionsthe(The screen will change to your desired source).
(TV,AV,YPbPr, HDMI1,HDMI2,HDMI3,PC)Main MENUPress MENU to display the main menu or return to the previous menu or close the main menu. Press ◄/► to high light the desired menu icon, and press ENTER to select.If no buttons are pressed, the menu will close automatically after about 10 seconds.Main Menu DescriptionPicture MenuAdjust your picture settings. The operations are slightly different among different source.Sound MenuAdjust the sound settings.

TV SETUP14Channel MenuCustomize your channel settings.Parental Control MenuSet program rating control and input source keypad lock function.Setup MenuSelect closed caption options, language and time.Other MenuSet the OSD blue background, whether auto power off if no signal or no operation, clear all user settings, etc.

TV SETUP
15
Picture MenuPress ▲/▼ to highlight one of the following options, then press ENTER or ► to enter next submenu to adjust it. Press EXIT to clear on-screen menu or MENU back to the previous menu.Picture SettingsAdjust the picture quality including brightness, contrast, color, tint, sharpness.Screen SizePress ◄/► to select the display aspect ratio till the picture is fit onto the screen.The operations are different according to different input source.PC SettingsThe item is available only for PC DB15 input mode.Color TemperaturePress ◄/► to select the color temperature that you feel comfortable.CoolGives white colors a blue tint.NormalGives white colors a neutral tint.WarmGives white colors a red tint.Advanced Picture SettingsThe Item is some special picture feature.

/Power Saving.

TV SETUP17PC SettingsPC Settings Menu is aviliable only in PC DB15 mode. Press ▲/▼ to highlight one of the following options, then press ENTER to select it.Auto AdjustAutomatically adjust Clock, Phase, H-Position and V-position settings.Horizontal PositionShift the screen slightly to left or right.Vertical PositionShift the screen slightly up or down.ClockAdjust the DB 15 Picture signal sampling clock rate.PhaseAdjust the DB 15 Picture signal sampling phase. It maybe affect the definition. Wrong value maybe result the interference.ResetReset the parameters of current menu to default value.