Proview MH462su User manual

46” Plasma Display
MH462su - PROVIEW-usermanual.doc
1
English
Contents
1. Getting started ......................................................................... 2
1.1 Opening the carton
1.2 Installing your plasma display
2. Safety instructions.................................................................... 3
3. Product features....................................................................... 9
4. Standard accessories ................................................................ 10
5. Name and function of different parts of your plasma display.... 11
5.1 Side panel
5.2 Front panel
5.3 Back panel
5.4 Remote controller
6. Connecting an external device to your plasma display.............. 20
6.1 PC module
6.2 VIDEO module
6.3 Connecting external speakers
7. Basic operation of your plasma display..................................... 24
7.1 Turning your plasma display on and off
7.2 Selecting input mode
7.3 Adjusting OSD item settings
7.4 Adjusting volume
7.5 Zooming in to/out of pictures
7.6 Miscellaneous functions
7.7 OSD functions
8. Optional accessories ................................................................ 33
8.1 Connect to antenna
8.2 Input and Output Connection
8.3 Operating Instructions
8.4 Advanced Functions
9. TV Instruction .......................................................................... 41
10..............................................................Technical specification
42
11..........................................................................Factory default

46” Plasma Display
MH462su - PROVIEW-usermanual.doc
2
43
12................... Cleaning your plasma display and troubleshooting
44

46” Plasma Display
MH462su - PROVIEW-usermanual.doc
3
English
1.
Getting started:
Your plasma display is a 46” WVGA (wide-screen VGA resolution) plasma
display. It is ultra slim, high picture quality, super flat and emits no radiation. It
has been tested to comply with the EMI Class B, UL and CSA safety standards
and is suitable for both commercial and home use.
Your plasma display is a highly delicate electronic device. Follow the instructions
below to maintain the proper performance of your plasma display.
1.1 Opening the carton:
yInside the carton, you will find your plasma display and the standard
accessories. Operational accessories, if any, will be packed in separate
boxes.
yYour plasma display is about 37kg in weight. As it is quite big, we
recommend you to carry it with two people.
yThe protective glass and glass filter are located on the front of your
plasma display. They are fragile and can easily be scratched. Handle
with care. Do not place your plasma display with the glass downward,
unless protected with soft padding.
yCheck if your plasma display is damaged and if any accessories are
missing from the carton.
yCarry your plasma display by the handles located at the back.
1.2 Installing your plasma display:
yRead this manual carefully before installing your plasma display.
yThis plasma display consumes about 340-350W of electricity, which is
higher than regular CRT TVs. Connect it to an independent power
source. If it needs an extension cord, please contact your technicians
for an extension cord that can resist higher voltage. Do not use
ordinary extension cords to prevent hazards.
yPut your plasma display on a flat and solid surface to prevent it from
falling . Keep the back of your plasma display away from the wall to
ensure good ventilation.
yFumes, moisture and dust will shorten the life of electronic parts. Do
not install your plasma display in the kitchen or bathroom.
yInstall your plasma display with the lower edge level. Improper
installation of your plasma display, such as turning it on end, will cause
damage to electronic parts due to bad internal ventilation.
yAvoid displaying a still picture for a long time to extend the life of your
plasma display.
yYour plasma display must be installed by your dealer or technicians of
our authorized dealers; otherwise, you may not be eligible for our full
warranty service.

46” Plasma Display
MH462su - PROVIEW-usermanual.doc
4
2.Safety instructions:
Your plasma display has been tested to comply with various safety standards for
ordinary uses. Improper use or operation of your plasma display may cause electric
shock or fire. You must follow the safety instructions below during installing, using
and maintaining your plasma display in order to prevent damage to the unit. Read
the following safety instructions carefully before use.
To ensure that you can use your plasma display properly and to prevent physical and
property damage, we have used the following symbols in this manual.
Warning------ Mistakes due to negligence may cause physical
or even life-threatening injuries.
Caution------- Mistakes due to negligence may cause physical
or material damage.
Examples of warning and caution messages:
Prohibition symbol
RISK OF ELECTRIC SHOCK—warning (caution) symbol.
Warning
Place plasma display only on a flat and solid surface.
Placing plasma display on unstable surface may risk the
plasma display falling.
Connect plasma display to correct voltage.
Improper voltage may cause fire or electric shock.

46” Plasma Display
MH462su - PROVIEW-usermanual.doc
5
English
Do not expose plasma display to wet locations.
* Do not use plasma display in places containing water.
* Prevent water from entering plasma display by
avoiding placing it near windows or outdoors to avoid
fire or electric shock.
* Disconnect plasma display from power source and
contact your dealer immediately when water enters
plasma display. Continuing use of plasma display may
cause fire or electric shock.
Warning
Do not put water containers or small metal articles
on top of plasma display.
Do not put glasses containing liquid, decorative plants,
cosmetics or chemical liquids or small metal articles on
top of plasma display. It may cause a short circuit and
fire or electric shock when liquid spills into plasma
display.
Do not damage power cord.
Do not damage or modify power cord. Pressure, heat and pulling
may damage power cord and cause fire or electric shock.
Do not modify or open plasma display.
Modification of plasma display may cause fire or electric shock.
Do not open plasma display, it may cause fire or electric shock.
Contact your dealer for service or adjustment.
Warning
Do not use plasma display under the following condition.
If smoke or a strange smell comes out of plasma display,
disconnect it from power source immediately and contact your
dealer after the smoke stops. Continuing use of plasma display
may cause fire or electric shock. Do not repair it on your own.