Pvinergy PVES300 User manual

PVES Series UserManual
UserManual
Shenzhen Pvinergy Technologies Co., Ltd
PVESSeries
SolarResidentialSystem

PVES Series UserManual
Overview
Thank you forchoosing PVESseriessolar residentialsystemfrom
ShenzhenPvinergyTechnologiesCo., Ltd.Withtheinnovativedesignand
impeccablequalitycontrol,PVESseriessolarresidentialsystem hasextremely
highstabilityand reliability,whicharewidelyappliedforhigh-demandingsolar
off-grid system.
Thismanualdescribestheinstallation,operationandtroubleshootingofPVES
series.Pleasereadthis manualcarefullybefore installationsandoperations.If
anyproblemis encounteredduringinstallationoroperation,pleaserefer to the
manualbefore contactingthelocaldistributororsalesrepresentative.This
manualcouldbehelpful to solvemost difficultiesofinstallationandoperation.
If necessary, pleasecontactinstallers.
ShenzhenPvinergyTechnologiesCo., Ltd
Room12A08, Elitebuilding, NanshanRd.,NanshanDistrict, Shenzhen, China.
PostalCode 518054
Tel [phone]
Fax [phone]
Web http://www.pvinergy.com

PVES Series UserManual
Contents
1. SymbolExplanation................................................................................................................................. - 1 -
2. Product Introduction.................................................................................................................................... - 2 -
2.1 PVESAppearance Overview.................................................................................................................... -2-
2.2DimensionsandWeights.......................................................................................................................... -3-
2.3SystemDiagram....................................................................................................................................... -4-
3. Installation..................................................................................................................................................... - 4 -
3.1 NotesbeforeInstallation........................................................................................................................... -4-
3.2ChecklistofPackage................................................................................................................................ -4-
3.3SafetyPrecautions.................................................................................................................................... -5-
4. Circuit Connection....................................................................................................................................... - 5 -
4.1 InputandOutputTerminals...................................................................................................................... -5-
4.2Wiring Diagramunder Inverter Mode...................................................................................................... -6-
4.3Wiring Diagramunder Charging Inverter Mode...................................................................................... -6-
5. PVESOperationInstruction....................................................................................................................... - 7 -
5.1 Inverter Mode........................................................................................................................................... -7-
5.2 Charing Inverter Mode............................................................................................................................. -7-
6. HMIInstruction............................................................................................................................................ - 7-
6.1 LCDDisplay........................................................................................................................................... -7-
7.AlarmInformationandTroubleshooting................................................................................................... - 8 -
7.1 SystemFailure......................................................................................................................................... -9-
8.TechnicalData..............................................................................................................................................- 11-

PVES Series UserManual
Installation and User Manual
-1-
1. SymbolExplanation
Danger
High voltagerisk;Inhibit touching;ifnotavoided, there will result
in casualties.
Warning
Potentialrisk;ifnotavoided, there will result in casualties.
Warning
Hightemperature;inhibit touching;incaution touchingmayresult in
scald.
Attention
Attention toexistingpotentialrisk;ifnotavoided, couldcausethe
device notoperatingproperlyorpropertyloss.
Attention
Itis compliancewithWEEE directive.

PVES Series UserManual
Installation and User Manual
-2-
2. ProductIntroduction
2.1PVES Appearance Overview

PVES Series UserManual
Installation and User Manual
-3-
2.2Dimensionsand Weights
Model Width mm） Depth mm） Length mm）Weight Kg）
PVES300 255 305 143 5.5
PVES600 255 305 143 5.7
PVES800 255 305 143 5.7
PVES1000 285 335 143 6.0

PVES Series UserManual
Installation and User Manual
-4-
2.3SystemDiagram
A. SolarPanel: Provide DC powerto inverter
B. PVESInverter: Charging batteryviaDCpowerfromsolarpanel(s);Converting DCpowerfrom
batteryto 110/220VACpowerforloads;Providing 12V/24Vand 5VDCinput
C. Battery:Charging through controller, storing solarenergyand discharging to loads
D. Loads:Divided intoACloadsand DC loads, such asfan, TV, computer, light, mobilephone, etc
3. Installation
3.1NotesbeforeInstallation
Thisusermanualdescribesinverterinstallation and safetyoperation. Pleasefollow
belowinstructionscarefullybefore installation:
ŸTo check the ambienttemperature forinstallation, it isrecommended from0℃to 45℃
ŸACoutputvoltage range:110/220Vac±5%,50/60Hz
ŸAdequate convection space surroundsthe inverter
ŸThe inverterisinstalled farawayfromexplosivevapor
ŸNo flammablesare nearthe inverter
ŸDo notexposethe PVinverterto directsunlight
3.2ChecklistofPackage
Pleasegooverthe itemscarefullyinthe box afteropenthe package.The itemsshouldcontainas
below:
No. Items Quantity

PVES Series UserManual
Installation and User Manual
-5-
1 PVES300/PVES600/PVES800/PVES1000 inverter 1
2 12/24Vincandescentlightwith wires 1
3 Length:1m6mm2 cable and batteryclamp 1
4 UserManual 1
5 QualityAssurance Card 1
6 10 in one USBcable 1
Verify thatthe above itemsare completewhen open the package
3.3SafetyPrecautions
A. Donotdisassemblethe enclosure. Thisinverterdoesnotcontainuserserviceableparts.Referall
servicing toqualified service personnel.All wiring and electricalinstallationshouldbe
conductedbythe qualified service personneland mustmeetCE requirements.
B. ACloads,PVvoltage and Batvoltage areterminated inside the PVInverter.Pleasedisconnect
these circuitsbefore servicing.
C. Energystored in thisequipment sDC link capacitors presentsa risk ofelectric shock. Even if the
equipmentisdisconnected fromthe gridand photovoltaicpanels,high voltagesmaystillexist
inside the PVinverter.Donotdisassemblethe enclosureuntil atleast5minutesafter
disconnecting all powersources.
D. Thisinverterismainlydesigned for110/220VACloads,12V/24Vand 5VDC loads.Pleasedo
notconnectthe inverterto grid, otherwise seriousdamage will be resulted in to the equipment.
E. Attentivelytake the inverteroutfromitspackaging and inspectforexternaldamage. Ifanyflaw
isfound, please contactthe localdealers.
4. Circuit Connection
4.1Input and Output Terminals
Terminalsymbols Function instruction Quantity
Bat+ Batteryanode terminal 1
Bat- Batterycathode terminal 1
PV+ PVpanelanode terminal1
PV- PVpanelcathode terminal1

PVES Series UserManual
Installation and User Manual
-6-
Terminalsymbols Function instruction Quantity
Power Electric switch forinverter 1
ACSwitch Outputswitch for110/220VACinverter 1
DCSwitch 12V/24Vand 5VDCoutputswitch 1
DC5V 5VDC outputterminal, USBconnection 2
DC12V/24V 12V/24VDCoutputterminal 4
4.2WiringDiagramunderInverterMode
A．Pleaseavoidshort-circuit forbatteryand make surethe polarityiscorrectbeforebattery
connectsto the unit. Incorrectpolarityconnection could cause permanentlydamage ofthe unit.
B．The cathodeand anodeterminalofbatteryareconnected respectivelytothe Bat+and Bat-
terminalofoff-gridinverter.Each DCterminalon the invertercan tolerate100ADC. The
suggested connectwire forpositive (+)isred wire, and fornegative (-)isblack wire.

PVES Series UserManual
Installation and User Manual
-7-
4.3WiringDiagramunderChargingInverterMode
A．Beforeconnecting PVpanelstoPVterminals,pleasemake surethe polarityiscorrect.Please
avoidshort-circuit forbatteryand make surethe polarityiscorrectbeforebatteryconnectstothe
unit. Incorrectpolarityconnection could cause permanentlydamage ofthe unit.
B．The cathode and anode terminalofPVpanelsareconnected respectivelytothe PV+ and PV-
terminalofoff-gridinverter.Each DC terminalon the invertercan tolerate50ADC. The suggested
connectwire forpositive (+)isred wire, and fornegative(-)isblack wire.
C．The cathodeand anodeterminalofbatteryareconnected respectivelytothe Bat+and Bat-
terminalofoff-gridinverter.Each DCterminalon the invertercan tolerate100ADC. The
suggested connectwire forpositive (+)isred wire, and fornegative (-)isblack wire.
5. PVES OperationInstruction
PVES seriessolarresidentialsystemcan notonlyundercharging invertermode, butalso invertermode.
5.1InverterMode
A. Connectbatterywirespursuantto figure 4.2, the wiring diagram
B. Powerswitch:Turn the switch on the back ofpowerintoon
C. ACoutputswitch:connecttoACswitch, providing 110/220Vand 50/60HzACpowerto loads
D. DCoutputswitch:connectto DCoutputswitch, providing DCoutputwith 12V/24Vand 5V
5.2ChargingInverterMode
A. Connectthe PVand BATcablespursuantto figure 4.2, the wiring diagram
B. Powerswitch:Turnthe switch on the back ofpowerintoon, providing powerforbatteryby
controller
C. ACoutputswitch:connecttoACswitch, providing 110/220Vand 50/60HzACpowerto loads
D. DCoutputswitch:connectto DCoutputswitch, providing DCoutputwith 12V/24Vand 5V
Notes：
Itisextremelyeasytooperatethe PVESsolarresidentialsystem.Themachine