Qube MVT User manual

®
MVT
Copyright © 2012 Qube Inc. All rights reserved.
MVT
GPS Vehicle Tracker
User Guide V 1.0
GPS Vehicle Tracker
Page 1

Contents
1. Applications ....................................................................................................................................< 3
2. Product Function and Specifications ............................................................................................. < 3
2.1 Product Function ................................................................................................................ < 3
2.2 Specifications ..................................................................................................................... < 4
3. Qube GPS Tracker and Accessories .............................................................................................. < 5
4. View .............................................................................................................................................. < 5
5. Before Using .....................................................................................................................................< 5
5.1 Install SIM Card ..................................................................................................................< 5
5.2 Charging ............................................................................................................................. < 6
5.3 LED Indications ................................................................................................................... < 6
5.4 Track by Calling ................................................................................................................... < 7
6. Installation ........................................................................................................................................ < 8
6.1 Install I/O Cable .................................................................................................................. < 9
6.1.1 Power/GND (PIN7/PIN8) .................................................................................... < 9
6.1.2 Digital Input (PIN1/PIN2/PIN3 Negative Triggering) ........................................... < 9
6.1.3 Digital Input (PIN4/PIN5 Positive Triggering) ..................................................... < 9
6.1.4 Output (PIN9/PIN10/PIN11/PIN12/PIN13) ......................................................... < 9
6.2 Install GPS/GSM Antenna ................................................................................................. < 10
6.3 Install Microphone and Speaker (Optional)...................................................................... < 10
6.4 Mount the Qube GPS Tracker Unit.....................................................................................< 10
Copyright © 2012 Qube Inc. All rights reserved. Page 2

1. Applications
 Vehicle Real Time Tracking
 Car Security/Anti-Hijack
 Fleet Management
2. Product Function and Speci ication
2.1 Product Function
 SiRF GPS and Quad Band GSM 850/900/1800/1900Mhz
 AGPS (with GSM Base Station ID)
 Track by SMS/GPRS
o SMS – Text message
o GPRS – 3G/4G Mobile Internet Connection
 Track on Demand
 Track by Time Interval
 Track by Distance Interval
 Track on Mobile Phone
 Listen-In (Voice Monitoring) (optional) or 2-way Audio (Optional)*
o Auto answer the incoming call for voice monitoring
 Internal 4mb Memory or Logging
 Motion Sensor
 Internal Backup Battery
 SOS Alarm
o Report to authorized phone number when SOS button is pressed.
 GPS Blind Area Alarm
o Report when Qube GPS Tracker enters/exits no GPS area.
 Geo-Fence Alarm
o Report when Qube GPS Tracker Enters or Exit pre-defined borders.
 Low Battery Alarm
o Report when backup battery’s voltage is below 3.5V.
 Speeding Alarm
o Report when Qube GPS Tracker speeds higher than the pre-set values.
 Impact Alarm
o Alarm when Qube GPS Tracker detects impact or crash.
 Tow Alarm
o Alarm when the tracker trembles for a period of time.
 GPS Antenna Cut Alarm
o Alarm when the GPS antenna is disconnected or cut.
 External Power Cut Alarm
o Alarm when external power supply is off or cut.
 Mileage Report(optional)*
 Engine Cut (Engine Immobilization)(optional)*
*Note: Qube provides basic tracking services only, advanced features are optional.
Copyright © 2012 Qube Inc. All rights reserved. Page 3

2.2 Speci ication
Copyright © 2012 Qube Inc. All rights reserved. Page 4
Items
Speci ications
Dimension
5.5"
height
x 2.7
”
width
x 1"
thickness
Weight
190g
Charging
Voltage
DC 9V~36V/1.5A
Back-up
Battery
850mAh/3.7V
Power
consumption
65mA standby current
Operating
Temperature
-20 C-55C
Humidity
5%~95%
Work Time
43 hours in power
-
saving mode and 10 hours in normal mode
LED
2 LED lights to show GPS, GSM and other status
Button 1 SOS and 1 power on/off
Microphone
Optional
Memory
4M
B
Sensor
Motion sensor & Impact sensor
GSM
Frequency
GSM 850/900/1800/1900MHz
GPS Chip
Latest GPS SIRF
-
Star III chipset
GPS Sensitivity
-
159dB
Positioning
Accuracy
10 meters, 2D RMS
I/O 5 Digital Input ( 2 positive triggering and 3 negative triggering)
2 Analog Input Detection
5 Output
1 USB port

3. QUBE GPS Tracker
and Accessories

Main Unit with Battery
 GPS Antenna
 GSM Antenna
 I/O Cable
 SOS Button
 USB Data Cable
 User Manual CD
(not included)
Downloadable @
www.qube.asia
4. View
On/off GPS LED
GSM LED
GSM antenna
GPS Antenna
5. Be ore Using
5.1 Install SIM Card
 Check
that the SIM has not run out of credit (test using phone)

Turn off the power before installing the SIM Card.

Unscrew and remove cover.
 Insert the SIM
card by sliding it into the card holder with the chip module facing to the
connectors on PCB.

Replace the cover and screw it in.
Copyright © 2012 Qube Inc. All rights reserved.
and Accessories
Main Unit with Battery
(not included)
www.qube.asia
GSM LED
Microphone/Speaker
GPS Antenna
USB Port
PIN(Power, I/O)
that the SIM has not run out of credit (test using phone)
Turn off the power before installing the SIM Card.
Unscrew and remove cover.
card by sliding it into the card holder with the chip module facing to the
connectors on PCB.
Replace the cover and screw it in.
PIN(Power, I/O)
card by sliding it into the card holder with the chip module facing to the
Page 5

5.2 Charging

Please connect GND (
and
charge the battery for at least 3 hours. We recommend
before f
irst Use.

Configure and Test before installation.
5.3 LED Indications
Press and hold the Power On/Off button for 3
GPS LED (Blue)
On
Flashing/Blinking (every 0.1 second)
Flashing/Blinking (
0.1 sec.
on and 2.9
Flashing/Blinking (1 second
on and 2 seconds off
GSM LED (Green)
On
Flashing/Blinking (every 0.1 second)
Flashing/Blinking ( 0.1 sec. on and 2.9 sec. off)
Flashing/Blinking (1 second on and 2 seconds off)
Copyright © 2012 Qube Inc. All rights reserved.
Please connect GND (
-Black) and Power (+Red) wires to 12V or 2
4 external power
charge the battery for at least 3 hours. We recommend
charging it for 8 hours
irst Use.
Configure and Test before installation.
Press and hold the Power On/Off button for 3
-5 seconds to turn
on/off the GPS Unit.
One button is pressed or input is active.
Flashing/Blinking (every 0.1 second)
Initializing or back
-
up battery is low
on and 2.9
sec. off
)
Qube GPS Tracker has a GPS fix
on and 2 seconds off
)
Qube GPS Tracker unit has no GPS fix
A call is coming in / a call is being made
Flashing/Blinking (every 0.1 second)
Initializing
Flashing/Blinking ( 0.1 sec. on and 2.9 sec. off)
Qube GPS Tracker is connected to the GSM network
Flashing/Blinking (1 second on and 2 seconds off)
Qube GPS Tracker Unit is not connected to the GSM
network
4 external power
charging it for 8 hours
on/off the GPS Unit.
One button is pressed or input is active.
up battery is low
Qube GPS Tracker unit has no GPS fix
A call is coming in / a call is being made
Qube GPS Tracker is connected to the GSM network
Qube GPS Tracker Unit is not connected to the GSM
Page 6

5.4 Track by Calling
Make a call to Qube GPS Tracker, drop after 1-2 rings, wait for SMS reply, be sure your SIM
card has not run out of credit.
Example of SMS Reply:
Now, 120620
15:25,A,23,40Km/h,56%, http://maps.google.com/maps?f=q&hl=en&q=14.612531,121.033403
&ie=UTF8&z=16&z=16&iwloc=addr&om=1
Content
Description
Note
Now
Current Location
Alarm Type
120620 15:25
Date & Time 2012 JUNE 20, 15:25
Date & Time in YYMMDD HH:MM
A
GPS Fixed
GPS Status Indicator:
A = Valid, V = Invalid
23
GSM Signal=23
GSM Signal
40Km/h
Speed =
40Km/h
Kilometer/Hour
56%
Battery Power = 56%
Battery Power Balance
http://maps.google.com
/maps?f=q&hl=en&q=14
.612531,121.033403&ie
=UTF8&z=16&z=16&iwl
oc=addr&om=1
Latitude: 14.612531
Longitude : 121.033403
Google Maps Web Link:
Click the link to get the location via
Google maps website.
If your mobile phone cannot visit websites, input the latitude and longitude into Google Maps
(http://maps.google.com).
Copyright © 2012 Qube Inc. All rights reserved. Page 7

6. Installation
6.1 Install I/O Cable
The I/O cable is a 16-pin cable including power, analog input, negative/positive input and output.
16
Power(+)
15
GND(-)
14
AD Input 2
13
Output 5
12
Output 4
11
Output 3
10
Output 2
9
Output 1
8
Power(+)
7
GND(-)
6
AD Input 2
5
Input 5
4
Input 4
3
Input 3
2
Input 2
1
Input 1
PIN Number
Color
Description
1(IN1/SOS)
White
Digital Input 1 (negative triggering)
2(IN2)
White
Digital Input 2 (negative triggering), for detecting status of vehicle
door.
3(IN3)
White
Digital Input 3 (negative triggering), for detecting status of vehicle door or ACC.
4(IN4)
White
Digital Input 4 (positive triggering), for detecting status of vehicle door.
5(IN5)
White
Digital Input 5 (positive triggering), for
detecting status of vehicle door or ACC.
6(AD1)
Blue
10 Bits Resolution Analog Inputs. 0
-
6V DC Detection. It can be used to connect
with temperature/fuel sensor etc.
7(GND)
Black
Ground
8(POWER)
Red
DC In(power source) Input Voltage: 9V
-
36V. 12V
Suggested.
9(OUT1)
Yellow
Output1. It can be used to connect with relay for engine immobilization.
Low voltage (0V) when effective and open drain (OD) when ineffective.
Output open drain sink voltage (ineffective): 45V max.
Output low voltage sink current (effective): 500mA max.
10(OUT2)
11(OUT2)
12(OUT2)
13(OUT2)
14(AD2)
Blue
10 Bits Resolution Analog Inputs. 0~6V DC Detection. It can be used to connect
with temperature/fuel sensor etc.
15(GND)
Black
Ground. It can be used to connect with
temperature/fuel sensor etc.
16(POWER)
Red
DC In (power source). Input voltage: 9V~36V. 12V suggested. Same as PIN8
Copyright © 2012 Qube Inc. All rights reserved. Page 8

6.1.1
Power/GND (PIN7/PIN8)
Connect GND (-
Black) and Power (+Red) wires to the
6.1.2
Digital Input (PIN1/PIN2/PIN3 Negative Triggering)
6.1.3
Digital Input (PIN4/PIN5 Positive Triggering)
6.1.4
Output (PIN9/PIN10/PIN11/PIN12/PIN13)
Copyright ©
2012 Qube Inc. All rights reserved.
QUBE
QUBE
Qube
Qube
Power/GND (PIN7/PIN8)
Black) and Power (+Red) wires to the
battery of the vehicle.
Digital Input (PIN1/PIN2/PIN3 Negative Triggering)
Digital Input (PIN4/PIN5 Positive Triggering)
Output (PIN9/PIN10/PIN11/PIN12/PIN13)
2012 Qube Inc. All rights reserved.
Page 9

6.2 Install GPS/GSM Antenna
GSM ANTENNA QUBE GPS TRACKER GPS ANTENNA
Connect the GSM antenna to the SMA connector which is ‘GSM’ text labeled. The GSM antenna is non-
directional, so you can hide it in any place of the vehicle.
Connect GPS antenna to the GPS connector which is ‘GPS’ labeled. The optimum location for the GPS
antenna is on the roof of the vehicle. The covert and GPS antenna are directional, make sure they are
facing up and lying as flat as possible. Secure them in place with glue or zip ties.
Note: Do not shield or cover the GPS antenna with any objects containing metal.
6.3 Install Microphone and Speaker (Optional)
6.4 Mount the Qube GPS Vehicle Tracker unit
If mounting required, there are 4 screw holes on the Qube GPS Tracker, 2 along either side that
act as fixing points to the vehicle.
For More information and other features
Call: [phone] for Qube Support Hotline
Or visit our website: www.qube.asia
Copyright © 2012 Qube Inc. All rights reserved. Page 10
Qube