RackBuddy The Walk In RB-15-0003-15 User manual

THE WALK IN
Please follow the assembly instructions to make sure your
RackBuddy experience will serve you the way you deserve.
Examples of combinations

1a · 1 row
marked as grey in 2-6
1b · 2 rows or more
INSTRUCTIONS
Use 4 way fittings

2

3
Slide on tees
Lock with flange

Add pipe
or shelf
support
Adjust
height
Mount
shelf
with
screws
4
6
5

CABINET AND
DRESSER
INSTRUCTIONS
1
NOTE! First screw ALL screws in half
- then tighten all screws.
Cabinet: Assemble side, top and bottom with 12 screws.
Dresser: Please be advised – instructions for Dresser
can be found with components.
Please follow the assembly instructions in order to build up everything correctly. If you
have any questions, do not hesitate to contact us. We hope you like your new RackBuddy!

2
B
B
C
C
D
D
D
D
APut the 2 clamps on the rods and tighten screws.
BInsert the bars into the clamps and tighten screws.
CPlace the Cabinet or Dresser on the bars.
DInsert and tighten the 4 screws from the bottom.
A
A

PARTS CABINET
PARTS DRESSER: see instructions for Dresser - can be found with components.
X2
X2, X3 or X4
rackbuddy.com
X8, X12 or X16
X4 X1
X2
X2
Recommended tools: