Reka 708642 User manual

WIRELESS
BLUETOOTH SPEAKER
User Guide

Table Of Contents
Table Of Contents
Overview
Scope Of Delivery
Components
General Information
Reading And Storing The User Guide
Intended Use
Explanation Of Symbols
Safety
Explanation Of Instructions
General Safety Instructions
Product Description
Description
Setup
Checking The Speaker
Charging The Speaker
Use
Turning The Speaker On/Off
Connecting A Bluetooth Device
Bluetooth Audio Controls
Bluetooth Call Controls
Resetting Bluetooth
TWS
Unparing TWS
AUX Mode
AUX Controls
Charging A Device
Copyright © 2019/20 Thunderbolt Photography, Richard Ross. All rights reserved.
All Photos and Illustrations may not be reproduced or used in any manner whatsoever without the
express written permission of the copyright holder.
1.
2.
2.
3.
3.
3.
4.
5.
5.
6.
8.
8.
9.
9.
9.
10.
10.
10.
10.
11.
11.
12.
12.
13.
13.
14.

Overview
Product Care
Storing
Cleaning
Trouble Shooting
Technical Data
Declaration Of Conformity
Disposal
Disposing Of The Packaging
Disposing Of The Device
15.
15.
15.
16.
17.
17.
18.
18.
18.

1.
Overview
Overview
Congratulations!
You have made an excellent choice with the purchase of this quality REKA®product.
By doing so you now have the assurance and peace of mind which comes from
purchasing a product that has been manufactured to the highest standards of
performance and safety, supported by the high quality standards of Quesh Ltd.
We want you to be completely satisfied with your purchase, so this REKA®product is
backed by a comprehensive manufacturer’s 3 year warranty and outstanding after
sales service through our dedicated helpline.
We hope you enjoy using this product for many years to come.
If you require technical support or in the unlikely event that your purchase is faulty,
please telephone our helpline for immediate assistance. Faulty product claims made
within the 3 year warranty period will be repaired or replaced free of charge provided
that you have a satisfactory proof of purchase.
(keep your receipt safe)
This does not affect your statutory rights. However be aware that the warranty will
become null and void if the product is found to have been deliberately
damaged, misused and/or disassembled.

Scope Of Delivery
Components
1Wireless Bluetooth Speaker
2USB ‘A’ to USB ‘Micro B’ Power Cable
33.5mm AUX Audio Cable
4Adjustable Strap
2
3
2.
Scope Of Delivery
4
1

3.
General Information
General Information
This user guide is based on the standards and regulations that are valid within the
European Union. Also the country specific directives and laws outside of the EU.
Reading and storing the user guide
This user guide belongs to this Wireless Bluetooth Speaker
(referred to as the “product” below). It contains information on how to
setup and use the product. Read the user guide carefully, in
particularly the safety instructions before using the product. Failure to
follow this user guide may lead to severe injury or product damage.
Intended Use
This product is exclusively designed to be recharged when required and to charge
other mobile devices such as smartphones, tablets and some laptops. This product is
not intended for commercial use.
Only use the product as described in this user guide. Any other use other than
directed may lead to damage of the product or equipment and even possible injury.
The manufacturer or retailer assume no liability of damaged caused by improper or
incorrect use.
This product IS NOT a toy.

Explanation of symbols
The following symbols are used on the product and packaging:
This symbol indicates additional information on the assembly or
operation of the product.
This symbol refers to the declaration of conformity. Products marked
with this symbol meet all the applicable community regulations of
European economic area.
This symbol refers to the box packaging.
The card used is made from widely recycled material.
This symbol refers to the disposal of waste electrical and
electronic equipment according to Directive 2012/19/EU of the
European Parliament and of the Council. The device and the batteries
must not be disposed of together with domestic waste. If you want
to dispose of the device, do it the environmentally friendly way by
bringing it and the batteries to a public collection point.
4.
Safety

5.
Safety
Safety
Explanations of instructions
The following symbols and signal words are used in this user guide.
WARNING!
CAUTION!
NOTE!
This symbol denotes situations that could cause
injury to yourself or others.
This symbol denotes situations that could cause
damage to the product or equipment as well as
possible injury to yourself.
This symbol denotes important information or
advice regarding the correct use of the product.

General Safety Instructions
Please read this important safety information before you use this product.
The following warning and caution information is to prevent injury to yourself or
others and to prevent damage to your product or equipment.
Risk of electric shock!
Failure to comply with safety warnings and regulations
can cause serious injury or death.
information shown on the rating plate.
disconnect it from the mains power in the event of a malfunction.
or plug is faulty.
or expose them to damp or moist conditions.
possible shock, fire or damage to yourself or the product.
the connectors and the power cables.
possible damage to the product and/or user.
Contact the service centre. No liability is assumed and warranty claims shall
be void in the case of unauthorised repairs, improper connection or
incorrect operation.
it may explode or result in fire if too much pressure is applied to it.
stove, or radiator. This product may explode when overheated.
WARNING!
6.
Safety

7.
Safety
Risk of electric shock!
Failure to comply with safety warnings and regulations
can cause serious injury or death.
Extreme temperatures can damage the product and reduce the charging
capacity and life of the internal battery.
Doing so will cause the product to malfunction.
WARNING!
CAUTION!
Failure to comply with safety cautions and regulations
can cause injury or property damage.
smoke or liquids leaking from the product, STOP using the product IMMEDIATELY
and call the service help centre for advice. Failure to do so may result in a fire
or explosion.
while operating a vehicle.
prevents snagging, trip or fall hazards.
fire. Never crush or puncture the product. Contact your local council for safe
disposal of this product as is contains a rechargeable Li-Ion battery.
NOTE!

Product Description
Description
1Status LED
2100% Capacity LED
375% Capacity LED
450% Capacity LED
525% Capacity LED
6Bluetooth/Mode Button
7TWS Button
8Power Button
9Volume-/Previous song
10 Volume+/Next song
11 Clip Mount
12 Micro USB Charge In Port
13 3.5mm AUX In Port
14 USB Charge Out Port
15 Dust Cover
A
8.
Product Description
5
4
3
2
6 7 8 9 10
1
15
12 14
13
11

9.
Setup
Setup
Check and charge the speaker before it’s first use to ensure you get the best
experience of the product out of the box.
Checking The Speaker
To check the current charge level of the speaker, press and hold the button A8
for 2 seconds. The 25%, 50%, 75% and 100% LED indicator lights A5, A4, A
3and A2on the top will light up according to the available charge stored in the
speaker. If the 25% LED A2is flashing, the speaker requires a full charge. Press and
hold the button A8for 2 seconds to turn the speaker off.
Charging The Speaker
To charge the speaker, you will need to use the micro USB port A9.
Connect the supplied USB ‘A’ to USB ‘Micro B’ power cable to a suitable 5V/2A USB
mains adaptor power supply via the USB ‘A’ connector. Insert the USB ‘Micro B’
connector to the micro USB port A9.
The micro USB A12 port is an input only charging point on the speaker.
DO NOT use the USB ‘A’ port A14 to charge the speaker.
A full charging cycle will take approximately 6 hours with a mains adaptor that
provides an output of 5V/2A. Lower voltage and amperage will take longer to charge
the speaker. A 5V/1A mains adaptor will typically take approximate 12 hours to fully
charge this speaker. The current charging level will be indicated by a flashing LED.
The LED will light up solid once that charge level has been reached. When all four
LEDs ( A2, A3, A4and A5) are lit the speaker is fully charged.
It is possible to use the speaker while it is charging, but it will increase the charge
time needed.
Always check the mains adaptor plug face for the output information.
Please refer to the Technical Data on page 17 for details regarding input charge.
DO NOT charge a device from the USB ‘A’ out port while charging the speaker.

10.
Use
Use
Turning The Speaker On/Off
Press and hold the button A8for 2 seconds to turn the speaker on. The speaker
will state “Power on” followed by a mode statement. The power level LEDs will light
up and stay lit for approximately 10 minutes. The status LED A1will flash white if
the speaker is looking to pair or flash blue if the speaker is automatically connecting
to a bluetooth device.
Press and hold the button A8for 2 seconds to turn the speaker off. The speaker
will state “Power off”
Action: Action:
Play / Pause Single quick press on A8button.
Skip Forward Press and hold the A10 button for 2 seconds.
Skip Back Press and hold the A9button for 2 seconds.
Volume + Single quick press on A10 button.
Volume - Single quick press on A9button.
Voice Assistant Double quick press on A7button.
Voice Assistant will only work if the connected device has this feature and that it
is compatible with this speaker.
Connecting A Bluetooth Device
This speaker can connect to smart phones, tablets, laptops and bluetooth capable
MP3 players. When the speaker is turned on, it is automatically ready to pair.
Make sure your device’s bluetooth is on. Search and select from the available device
list ‘REKA AUDIO’. Pairing is automatically completed when the speaker states
“connected” and the status LED A1is flashing blue. Once a device has been
connected, it will automiatically connect to the speaker providing the speaker is still
in the ‘paired device’ list of the device.
Headphone and different model speakers are not compatible.
Bluetooth Audio Controls
This speaker has some basic feature bluetooth controls that are compatible with
most bluetooth devices.

11.
Use
Resetting Bluetooth
To reset the speakers bluetooth, press and hold the button A6for 5 seconds.
Once complete you can now re-pair an existing or new device.
Action: Action:
Volume + Single quick press on A10 button.
Volume - Single quick press on A9button.
Answer/End Call Single quick press on A6button.
Rejects A Call Press and hold the A6button for 2 seconds
Call Last Double quick press on A6button.
Bluetooth Call Controls
This speaker has some basic feature bluetooth call controls that are compatible with
most smart phones.

12.
Use
TWS (True Wireless Stereo)
This speaker can pair with another of the same model to provide you with true
stereo sound. To connect the two speakers make sure all previously connected
bluetooth devices have their bluetooth modes turned off. Turn on both speakers
simultaneously by pressing and holding the button A8for 2 second.
Next, on one of the speakers only, give the button A7a quick press to initiate
TWS pairing mode. Once paired, the ‘master’ speaker’s status LED A1will have a
blink blue glow and the ‘slave’ speaker’s status LED A1will have a solid blue glow
Bluetooth controls are only accessible on the ‘master’ speaker.
The TWS feature is available in AUX mode.
Unpairing TWS
To unpair the speakers from each other press the button A7on the ‘master’
speaker. Both speakers will now be available to pair to separate devices.
Please note TWS feature in AUX mode, you can only use 3.5mm cable to the master
speaker. Once connected successfully, the master speaker LED light will be solid blue,
and the slave speaker LED light will be solid white.

13.
Use
AUX Mode
This speaker features a 3.5mm auxiliary audio in port. To use this feature, connect the
supplied 3.5mm audio cable to the AUX in port A13 . Connect the other end to
either a 3.5mm audio out or headphone port on your chosen device. The speaker
will automatically change to AUX mode indicated by a constant blue status LED A1
and state “Line in”. Disconnect the AUX cable to return to bluetooth mode.
Action: Action:
Mute Single quick press on A8button.
Volume + Single quick press on A10 button.
Volume - Single quick press on A9button.
For best results, make sure the connected device’s volume is set to maximum.
AUX Controls
This speaker has some basic feature AUX controls.

14.
Use
Charging A Device
This speaker features a 5V/1A USB ‘A’ out port A14 so the speaker can be used as a
powerbank. To use this feature, use the device’s manufactures USB charge cable and
connect the USB ‘A’ end to the speakers 5V/1A USB ‘A’ out port A14 and the other end
to the device. Check the device for a charging icon or charge notification to confirm
the device is taking a charge.
DO NOT charge a device from the USB ‘A’ out port while charging the speaker.

15.
Product Care
Product Care
Please read this important product care information before you store or clean this
product. The following information is to prevent damage to your product and to
keep it in good working condition.
Storing
It is recommended for long term storage that you do the following:
oC - 45oC).
You can reduce the effectiveness or damage the internal battery if the device is
left with no charge for long periods, stored in damp conditions or in
temperatures below 0oC or above 45oC.
Cleaning
It is recommended that to clean your product you do the following:
Chemicals and detergents can corrode the speakers’s housing and could
damage the battery if there is any liquid ingress.

16.
Trouble Shooting
Trouble Shooting
Problem Cause Solution
Bluetooth dropping out after a
few minutes.
Manually clear the device’s
cache & restart the device.
Replace batteries
Stuttering/delay music.
running on device.
Close unused apps.
Unpair & delete bluetooth
profile, then re-pair device.
Use away from high powered
devices or strong RF signals.
No music.
your device.
Use a compatible music app.
None.
Check Bluetoothis on & the
device is connected.
Turn on or replace batteries.
Turn the volume up.
Not playing a track. Use a none DRM protected file.
Use .MP3 or .WAV file formats.
If you are unsure in anyway about your product please contact the
after sales support listed on the warranty card.

17.
Technical Data / Declaration Of Conformity
Technical Data
1.55Kg
115mm x 270mm x 110mm
1x USB ‘A’, 1x micro USB, 1x 3.5mm AUX
IP67
Rechargeable Li-Ion
10000mAH
Approximately 6 hours (5V/2A)
Approximately 20 hour
Micro USB
5V/2A
1x Micro USB, 1x 3.5mm AUX
5V/1A
5.0
2.400GHz-2.483GHz
A2DP, AVRCP, HFP, HID, HSP
10m
Reka Audio
2 x 63.5mm
Stereo
2 x 15W
50db
4 Ω
General
Approx Weight:
Approx Dimensions:
Available Ports:
IP Rating:
Battery
Battery Type:
Capacity:
Charge Time:
Play Time:
Ports
Input Ports:
Input Voltage Micro USB:
Output Ports:
Output Voltage USB ’A’:
Bluetooth
Bluetooth Ver:
Frequency Range:
Bluetooth Protocol:
Bluetooth Range:
Bluetooth Name:
Speaker
Speaker Size:
Speaker Channels:
Speaker Watts:
Max Speaker Output:
Impedance
Declaration Of Conformity
Hereby, Quesh Ltd declares that this product is in compliance with:
Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
address: www.quesh.co.uk