Reliable Equipment LR 88.5 Manual

1
LR-88.5 / LR-75 / LR-62.5
DISTRIBUTED BY
WARNING
All information found in this guide
must be read and understood before
use or testing of this tool. Failure
to read and understand these warnings
and safe handling instructions could result
in severe personal injury and or death.
HYDRAULIC
LONG REACH
CHAINSAW
LR Manual 05-08
OPERAOPERA
OPERAOPERA
OPERATT
TT
TORS’ORS’
ORS’ORS’
ORS’ GUIDEGUIDE
GUIDEGUIDE
GUIDE
For cutting and trimming of limbs and
branches from the ground or an aerial bucket
that a standard chainsaw could not reach.

2
TABLE OF CONTENTS
Saw Description ........................... 2
Registration .................................. 2
Safety Instructions .................... 3-6
SPECIFICATIONS
General .......................................... 7
Connections and Hoses .............. 8
Pre-Operation ............................... 9
Spool Selector .............................. 9
Operation of Saw ........................ 10
MAINTENANCE
General ........................................ 11
Chain Oiler .................................. 12
Chain Tension ............................ .13
Troubleshooting ......................... 14
DESCRIPTION
The long reach chainsaw is intended for safely cutting and trimming trees which are
out of reach of the ordinary chain saw. The powerful hydraulic drive motor can easily
make cuts of 12 inch diameter from the ground or an aerial bucket. With an overall
length of 88.5 inches, the operator is easily able to reach the areas not possible with
a standard chain saw.
The dielectric property of the fiberglass extension tube will reduce the chance of
electric shock when used near an energized electric line. Other features include a
trigger guard to prevent accidental movement of the chain, a covered sprocket guard,
and a rubber collar hand stop. A quick set spool can be turned 180 degrees for
closed center/open center operations.
UPON RECEIPT OF THIS TOOL, COMPLETE THE REGISTRATION BELOW.
SERIAL NUMBER
DATE OF PURCHASE
DEALER NAME
PARTS LISTS
Major Components ..................... 15
Head, motor side ........................ 16
Head, chain side ......................... 17
Handle ......................................... 18
REPAIR INSTRUCTIONS
Disassembly .......................... 19-20
Assembly ................................... .21
Product Update .......................... .22
Parts Order Form ........................ 23
This symbol indicates items
of extreme importance. Safety
of user and others may be in
jeopardy if these instructions
are not read and understood.

3
WARNING
BEFORE USING THIS CHAINSAW, READ THE WARNINGS
and the recommended practices described in this manual.
Failure by the operator to read and fully underst and these
warnings will leave this person unqualified to use and
operate this tool. Property damage, severe personal injury,
and/or death could result by not following these warnings.
Eye
Protection
These warnings will appear in appropriate locations when they are pertinent to the
particular subject being shown. Read each one carefully and follow them strictly.
WARNING
Always wear eye protection to avoid
injury from flying debris or hydraulic
oil leaks. Failure to do so can result
in serious personal injury.
Hard Hat
WARNING
Always wear a hard hat to avoid injury
from debris. Failure to do so can
result in serious personal injury.
Hearing
Protection
WARNING
Always wear hearing protection, to
avoid hearing loss due to long term
exposure to high noise levels.
Foot
Protection
WARNING
Always wear foot protection.
Failure to do so can result in serious
personal injury.
Dust Mask
WARNING
Some timbers may produce irritants.
Failure to observe this warning
may result in serious health issues
and/or breathing difficulty.
WARNING
Operation/Safety
methods may vary in
accordance with the
working guidelines
established b y each
utility or contractor.
For your own safety, ensure that you
fully comply with all safe operation
guidelines required by your employer.

4
Jamming
Jamming or pinching will occur when the wood being cut
closes in on the top of the chain or guide. This action results
in pushback or a kickback, usually very fast with strong force
toward the operator. Be careful and be aware of what causes
this set of circumstances, so the operator can do everything
possible to avoid them.
WARNING
Safety
DO NOT attempt to make any changes to any of the component
parts or accessories when connected to the power source.
DO NOT adjust, inspect, or clean tool while the tool is connected
to the power source. The tool could accidentally start up
and cause serious injury.
DO NOT lock the trigger in the On Position. In an emergency, it is impossible
to shut down the tool. Serious damage or injury could occur during the
time required to stop the tool.
DO NOT alter or remove the safety latch attached to the trigger. This latch is
designed to prevent accident al movement of the trigger , which could cause
the chain to start up and cause severe personal injury or property damage.
DO wear protective gloves when handling or adjusting the saw chain. The saw can
and will cause damage to the hands without gloves either running or stopped.
Failure to follow these warnings can result in serious injury and/or death.
WARNING
Tip Contact
Accidentally touching an object with the tip of the chainsaw
can cause a rapid movement of the assembly up and back
towards the operator, with possible injury to the operator
or damage to the surrounding objects.
Worn or Damaged Saw Chain
DO NOT operate this tool with a worn or damaged saw chain.
Worn, damaged, or dull saw chain will increase the
likelihood of kickback or pushback.
WARNING
WARNING

5
WARNING
Oil Injection Injury
Hydraulic oil or fluid under the skin is a serious injury. Oil
under pressure can penetrate the skin and may cause
dismemberment or loss of life. Seek medical assistance
immediately if such an injury should occur.
Always wear safety gloves and eye protection when operating or handling.
DO NOT use fingers or hands to attempt to locate a leak.
DO NOT Handle Hoses or Couplers while the hydraulic system is pressurized.
NEVER open or service the system before completely depressurizing.
Electrical Shock Hazard
Use only certified nonconductive hoses and fittings. Always
wear and use the necessary clothing, equipment and safety
practices to protect against electrical shock. Failure to
follow these rules can result in serious personal injury .
WARNING
Make certain the fiberglass extension tube is free from moisture, oil, and
grease. The accumulation of any or all of the above-mentioned materials
will reduce the insulating properties of the fiberglass extension tube.
WARNING
General Safety
Ensure that all fellow employees and bystanders are clear and
protected from possible injury caused by this tool or the
operations being performed. Persons in close proximity could
be injured and property damaged if the tool were to malfunction.
This tool should always be used within the limits and purposes
stated by the product manufacturer . Abuse or usage over and
above the manufacturers’ intended purposes could cause
damage to the tool and severe injury to the operator.
Burn Hazard
Saw body, blade, bar as well as other component s will be hot
during and after use. Use care when handling this tool. Hot
surfaces may cause serious burns. Failure to observe this
warning may result in serious personal injury.
WARNING